• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.3
• /
• pp.194-200
• /
• 2020

Perylene bisimide derivatives are developed for red organic phosphor because of their advantages, such as excellent luminous efficiency and high thermal stability. Despite these advantages, they have poor solubility characteristics in organic solvents and short emission wavelength as red organic phosphor for hybrid light-emitting diodes (LEDs). In this study, we prepared terrylene bisimide using a coupling reaction and swallow-tail imide group, which has excellent solubility. The structures and properties of swallow-tail terrylene bisimide (9C) were analyzed using ¹H-nuclear magnetic resonance (¹H-NMR), Fourier-transform infrared (FT-IR), UV/Vis spectroscopy, and thermal gravimetric analysis (TGA). The maximum absorption wavelength of (9C) in the UV/Vis spectrum was 647 nm, and the maximum emission wavelength was 676 nm. In the TGA, (9C) demonstrated good thermal stability with less than 5 wt% weight loss up to 415℃. In the solubility test, (9C) has a good solubility of more than 5 wt% in chloroform and dichloromethane. When the compounds (9C) were mixed with PMMA (polymethly methacrylate), the films showed peaks at 680 nm in the PL spectra. The results verify the suitability of (9C) as a red organic phosphor for hybrid LEDs.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.2
• /
• pp.131-138
• /
• 2004

This study was aimed to investigate the feasibility of nasal delivery of caffeine for the elimination of sleepiness. The effects of various vehicles, solubilizers, and enhancers on the permeation of caffeine through rabbit nasal mucosa was observed. The permeation study was carried out using a Franz-type permeation system at $37^{\circ}C$, and the amount of caffeine permeated though the rabbit nasal mucosa was determined by a validated HPLC. The apparent solubility and phys iochemical stability of caffeine in various nasal formulations were was determined. The effect of hydrotropes and modified cyclodextrins on the solubility of caffeine in water was determined by equilibrium solubility method. The solubility of caffeine in water was 29 mg/mL at $30^{\circ}C$. The addition of sodium benzoate and nicotinamide at 10% improved the solubility of caffeine (115 and 132 mg/mL, respectively) in aqueous solution. The flux of caffeine though the nasal mucosa from aqueous solution was $2.1{\pm}0.26\;mg/cm^2/hr$. The addition of sodium benzoate reduced its permeation $(1.4{\pm}0.01\;mg/cm^2/hr)$, but sodium benzoate with 5% $2HP{\beta}CD$ and 0.03% monoterpenes increased its permeation $(2.4{\pm}0.04\;mg/cm^2/hr)$ markedly. The addition of nicotinamide also increased also increased its permeation $(2.5{\pm}0.36\;mg/cm^2/hr)$. markedly. As the concentration of caffeine in nasal formulation increased, the permeation flux increased linearly. Caffeine was stable physicochemically and enzymatically in the nasal mucosa extract at $37^{\circ}C$. These results suggest that caffeine can be efficiently delivered nasally and the development of nasal formulation will be feasible.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.1
• /
• pp.86-92
• /
• 2019

Although perylene bisimide derivatives have advantages such as excellent thermal stability and high luminance efficiency, they have poor solubility characteristics in organic solvents. In this research, in order to improve the solubility characteristics, we prepared perylene bisimide derivatives (1C) and (2C) with swallow-tail substituted imide, which is known to lead to excellent solubility. The structures and properties of swallow-tail perylene bisimide (1C) and (2C) were analyzed by $^1H-NMR$, FT-IR, UV/Vis spectroscopy, and thermogravimetric analysis (TGA). The maximum absorption wavelengths of (1C) and (2C) in the UV/Vis spectrum were 558 nm and 556 nm, respectively, and the maximum emission wavelengths were 602 nm and 600 nm, respectively. In the TGA, (1C) demonstrated good thermal stability with less than 5 wt% weight loss up to $242^{\circ}C$. In the solubility test, (1C) and (2C) exhibited solubilities of more than 5 wt% in chloroform, ethyl acetate, and dimethylformamide, but not in methanol. When the compounds (1C) and (2C) were mixed with PMMA (polymethyl methacrylate), thin films showed peaks at 679 nm and 677 nm, respectively, in the photoluminescence spectra. (1C) was found to be a possible candidate as red organic phosphor for hybrid LEDs.

• Restorative Dentistry and Endodontics
• /
• v.47 no.1
• /
• pp.10.1-10.11
• /
• 2022

Objectives: This study aimed to investigate the color stability, solubility, and surface characteristics of 3 calcium silicate-based cements (CSCs) after immersion in different solutions. Materials and Methods: ProRoot white mineral trioxide aggregate (MTA), Biodentine, and Endosequence Root Repair Material (ERRM) were placed in cylindrical molds and stored at 37℃ for 24 hours. Each specimen was immersed in distilled water, 5% sodium hypochlorite (NaOCl), 2% chlorhexidine, or 0.1% octenidine hydrochloride (OCT) for 24 hours. Color changes were measured with a spectrophotometer. Solubility was determined using an analytical balance with 10^-5 g accuracy. The surface characteristics were analyzed using scanning electron microscopy and energy-dispersive spectroscopy. Data were analyzed using 2-way analysis of variance, the Tukey test, and the paired t-test. Results: MTA exhibited significant discoloration in contact with NaOCl (p < 0.05). White precipitation occurred on the surfaces of Biodentine and ERRM after contact with the solutions, and none of the materials presented dark brown discoloration. All materials showed significant solubility after immersion in the solutions (p < 0.05), irrespective of the solution type (p > 0.05). The surface topography and elemental composition of the samples showed different patterns of crystal formation and precipitation depending on the solution type. Conclusions: All materials presented some amount of solubility and showed crystal precipitation after contact with the solutions. Biodentine and ERRM are suitable alternatives to ProRoot MTA as they do not exhibit discoloration. The use of OCT can be considered safe for CSCs.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.4
• /
• pp.273-280
• /
• 2021

The water resistance is important factor for sunscreen formulations. Generally a sunscreen cream was formulated by a water-in-oil (W/O) emulsion. In the W/O emulsion system, silicone oils are added to improve the texture of formulations. Silicone oils have low compatibility with organic sunscreen agent, causing problems with the stability in emulsion. In this study, the compatibility between various oils in the W/O emulsion was derived numerically using Hansen solubility parameter (HSP) at first. HSP is represented a dispersion degree, a polarity, and a hydrgen bond in a composition. In this study, various emulsions were prepared according to the types of oils with different HSP values and then monitored by a viscosity and morphology according to the time and temperature. The HSP values of components and the experimental results have similar activities for the stability of emulsions. HSP made it easy to select oil with high compatibility. When the compatibility of the oil phase in the W/O emulsion was high, the viscosity change over time was small. The stability was improved under the freeze-thaw cycle (-15 ℃ ~ 45 ℃). In the future, if the composition of the ingredients is optimized through HSP, it is expected that it will be helpful in the development of W/O type sunscreen formulations that are excellent in use and stability.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.9
• /
• pp.577-582
• /
• 2017

The white light of a hybrid LED is obtained by using red and green organic fluorescent layers made of polymethylmethacrylate (PMMA) films, which function as color down-conversion layers of blue light-emitting diodes. In this research, we studied the fluorescence properties of a red organic fluorophore, employing perylene bisimide derivatives applicable to hybrid LEDs. The solubility, thermal stability, and luminous efficiency are important characteristics of organic fluorophores for use in hybrid LEDs. The perylene fluorescent compounds (1A and 1B) were prepared by the reaction of 4-bromophenol and 4-iodophenol with N,N'-bis(4-bromo-2,6-diisopropylphenyl)-1, 6,7,12-tetrachloroperylene-3,4,9,10-tetracarboxyl diimide (1) in the presence of dimethyl formaldehyde (DMF) at $70^{\circ}C$. The synthesized derivatives were characterized by using $^1H-NMR$, FT-IR, UV/Vis absorption and PL spectra, and TGA analysis. Compounds 1A and 1B showed absorption and emission at 570 nm and 604 nm in the UV/Vis spectrum. We also documented favorable solubility and thermal stability characteristics of the perylene fluorophores in our work. Perylene fluorophore 1, with the 4-bromophenol substituent 1A, exhibited particularly good thermal stability and solubility in organic solvents.

• Korean journal of food and cookery science
• /
• v.31 no.3
• /
• pp.241-247
• /
• 2015

This study was conducted in order to evaluate emulsion mapping between emulsion stability and moisture content, cooking yield, hardness, protein solubility, apparent viscosity, and overall acceptability of pork or beef emulsion batters. The pork and beef emulsion batters were added to different parts of the meat. The formulations indicating low emulsion stability and high cooking yield were T1 (pork shoulder), T2 (pork ham), and T5 (beef tenderloin) treatments. Low stability, low hardness and protein solubility were also T1 (pork shoulder), T2 (pork ham), and T5 (beef tenderloin) treatments. The Pearson's correlation coefficients show that emulsion stability is negatively correlated with cooking yield (p<0.05), with a value of -0.90, and positively correlated with hardness (p<0.05), and protein solubility (p<0.01) with values of 0.65 and 0.59, respectively. This approach has been found to be particularly useful for highlighting differences among the emulsified properties in emulsion meat products. Therefore, the results obtained with emulsion mapping are useful in the making of new emulsified meat products of the desired quality.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.2
• /
• pp.85-90
• /
• 2010

Docetaxel-loaded liposomes were prepared by emulsion-solvent evaporation method, then coated with chitosan at room temperature and lyophilized. This system was designed in order to improve solubility and stability of docetaxel in the GI tract for oral drug delivery. The solubilizing effect of some frequently used solubilizers and/or liposome was determined. Among the results docetaxel-loaded liposomes prepared with 0.5% TPGS as a solubilizer showed 100-fold higher solubility than docetaxel. In a stability test, mean particle size of different liposome formulations was measured by a particle size analyzer in simulated gastric fluid (SGF) and in simulated intestinal fluid (SIF). The particle size of uncoated liposomes was significantly increased compared with that of chitosan-coated liposomes in SGF, however, there was no significant difference between coated and uncoated liposome in SIF. It is evident that chitosan-coated liposomes were more stable in GI conditions. The release characteristics of docetaxel-loaded liposomes were also investigated in three buffer solutions (pH 1.2, 4.0, 6.8). Docetaxel release did not occur in pH 1.2 for 4 hrs. However, in pH 4.0 and 6.8 conditions, docetaxel was gradually released over 24 hrs as a sustained release. It seems that aggregation and precipitation of particles by electrostatic interaction might protect docetaxel from being released. In Conclusion, the results from this study show that the chitosan-coated liposomes may be useful in enhancing solubility and GI stability of docetaxel.

• Journal of the Korean Home Economics Association
• /
• v.28 no.4
• /
• pp.41-50
• /
• 1990

Soy protein was isolated from Korean soy bean 'Chang ryub' and chemically modified with succinic anhydride. Functionality of the soy protein isolate(SPI), succinylated SPI(SPPI), and PP590(commercial) at various pH were investigated. The mechanical and sensory properties of soy bean curds made from several mixing ratio of succinylated soy bean milk were observed. The solubility of SPI significantly increased with succinylation. The solubility of PP590 was lower than that of SSPI. The solubility of SPPI increased significantly in 0.03M CaCl2 solution. The emulsifying activity of SSPI increased. On the range of pH above pI the emulsifying activity of PP590 was higher than that of SPI. There was no difference in emulsion stability among the groups. The foam expansion capacity of SPPI increased at higher pH than pI but the foam stability decreased significantly above pH 9. Mechanical texture profile analysis revealed the modified soy bean curds had the lower hardniss, chewiness and cohesiveness with increased modification. The mechanical characteristics of modified soy bean curds revealed generalized Maxwell Model of 7-elements or 5-elements. In sensory evaluation, the hardness, the springiness and acceptability of modified soy bean curds were lower significantly than those of control soy bean curd.

• YAKHAK HOEJI
• /
• v.46 no.3
• /
• pp.168-173
• /
• 2002

The physicochemical properties of aloesin, which has been recently found to reduce renal toxicity induced by cis-platin, were studied including solubility, partition coefficient ( $P_{c}$ ), osmolality, and stability. The solubility of aloesin was about 500 mg/mι, and the $P_{c}$ value for n-octanol/water was 1.01 $\pm$ 0.03. The degradation of aloesin followed the pseudo-first-order kinetics and was dependent on temperature, pH and ionic strength. From the pH-rate profile, the optimal pH was found to be 2.0~3.0. Some metal ions increased the degradation rate in the rank order of M $n^{2+}$ ＞ F $e^{3+}$ ＞ C $u^{2+}$ ＞ F $e^{2+}$. On the other hand, other metal ions such as B $i^{3+}$, $Ba^{2+}$, Z $n^{2+}$, N $i^{2+}$, $Co^{2+}$ and $Mg^{2+}$ did not show the unfavorable effects. After autoclaving, aloesin contents remaining were 81.8~98.8% of initial concentrations depending on pH. The most stable pH was 3.98 in the autoclaving. Osmolality increased linearly as concentration increased.sed.creased.sed.