• Journal of Korea Water Resources Association
• /
• v.36 no.4
• /
• pp.623-631
• /
• 2003

A large scale hydrological laboratory model tests for the geotextile tube were conducted to investigate the stability of geotextile tube and the capability of breakwater with variations of significant wave height, percentage of soil filling, and the water level above geotextile tube. The sliding displacement of geotextile tube is measured to check the stability of geotextile tube for given the various significant wane heights. The marked mash was laid out at the bottom of water channel to measure the displacement of geotextile tube. The bench mark was furnished in the upper part of water channel and the initial location was marked every 10cm interval to measure the displacement of geotextile tube. The wane transmit ratios are analyzed with the variations of soil filling of tube and of the top crown height wave above the geotextile tube in order to study the performance of brekwater before and after the installation of geotextile tube.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.571-578
• /
• 2005

We propose a new optimization framework for the reactive scheduling. The proposed rescheduling scheme is specially focused on how to generate rescheduling results when equipment failure occurs. The approach is based on a continuous-time problem representation that takes into account the schedule in progress, the updated information on the batches still to be processed, the present plant state, the deviations in plant parameters and the time data. To update the predictive scheduling, we used right shift rescheduling and total regeneration when equipment failure occurs. And, a practical solution to the rescheduling problem requires satisfaction of two often confliction measures: the efficiency measure that evaluates the satisfaction of a desired objective function value and the stability measure that evaluates the amount of change between the schedules before and after the disruption. In this paper, the efficiency is measured by the makespan of all jobs in the system. And, the stability is measured by the percentage change in makespan and the modified sequence deviation in the predictive scheduling and rescheduling.

• Journal of Korean Physical Therapy Science
• /
• v.28 no.1
• /
• pp.11-22
• /
• 2021

Background: This study was to investigate the effects of active stretching and stability exercise on piriformis muscle thickness and low back pain of male patients with chronic low back pain. Design: Randomized Controlled Trial. Methods: 45 male patients participated in this study. All subjects were randomly assigned. Subjects divided into 15 who underwent contract relaxation (CR) of the proprioceptive neuromuscular facilitation (PNF) to their hip joints, 15 who underwent a combination of isotonic (CI) of the PNF, and the rest 15 who underwent the two techniques (CR+CI). Real-time diagnostic ultrasound was used to measure thickness of the piriformis muscles. The visual analogue scale (VAS) was used to measure degrees of low back pain. A two-way repeated measures ANOVA was used to compare the average values. The SPSS 24.0 was used as the statistical program, and the significance level was set at .05. Results: The CR and the CR+CI groups had more decreased thickness of piriformis muscle when compared to the CI group. The CR+CI group had more decreased pain when compared to the CR and the CI groups. Conclusion: These results suggest that combination of stretching and stability exercise was effective on male patients with chronic low back pain showing limited hip medial rotation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.3
• /
• pp.560-568
• /
• 2001

The aim of the present study was to measure intra-individual consistency in clothing and fabric evaluation and to examine its relation to the ratings. A sample of 93 female and 97 male university students rated clothing of 4 styles of daytime wear and 2 fabrics on 15 pairs of polar adjectives twice in 7-days interval. Correlation coefficients between the two ratings for each subject, intra-individual consistency in the evaluation, ranged from -0.12 to 0.89 and mean coefficient was 0.63 of female and -0.01 to 0.78 and mean coefficient was 0.54 of male. Based on the coefficients, the subjects were classified into three groups: high, medium, and low intra-individual consistency. Analysis of variance of mean ratings by the three groups revealed that significant difference existed in 24% of female and 23% of male in 90 combinations of 6 clothing and 15 semantic differential scales. Female of subjects with high intra-individual consistency were most likely definite to evaluate clothing, whereas the ones with low were least. But male subjects were not definite. Mean correlation coefficients for style evaluation subscales of female was 0.39, but male was 0.44. Among the semantic differential scales, high stability in the two ratings was observed for the synthetic clothing evaluation. Correlation coefficients for each clothing obtained from the mean score of the subjects in each semantics differential scale were around 0.98, including that the mean scores of the subjects in each scale could yield excellent stability in clothing evaluation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.6
• /
• pp.120-127
• /
• 2007

This paper describes the development of a nonlinear observer for four wheel steer (4WS) vehicle. An observer is designed to estimate the vehicle variables difficult to measure directly. A brake yaw motion controller (BYMC), which uses a PID control method, is also proposed for controlling the brake pressure of the rear and inner wheels to enhance lateral stability. It induces the yaw rate to track the reference yaw rate, and it reduces a slip angle on a slippery road. The braking and steering performances of the anti-lock brake system (ABS) and BYMC are evaluated for various driving conditions, including straight, J-turn, and sinusoidal maneuvers. The simulation results show that developed ABS reduces the stopping distance and increases the longitudinal stability. The observer estimates velocity, slip angle, and yaw rate of 4WS vehicle very well. The results also reveal that the BYMC improves vehicle lateral stability and controllability when various steering inputs are applied.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.69-81
• /
• 2003

Numerical analysis is important for the design, construction and maintenance of large caverns. The rock mass contains generally discontinuities such as faults, joints and fissures. The mechanical behavior and geometric characteristics of these discontinuities would have a significant impact on the stability of the caverns. In this research the Distinct Element Method(DEM) was used to analyze the structural stability of the large cavern. The Barton-Bandis Joint Model (B-B J.M) was used as a constitutive model for the joint. In addition, two different cases 1) analysis with a support system and 2) analysis with no support system, were analyzed to optimize a support system and to investigate reinforcing effects of a support system. The most significant parameters of in-situ stress, JRC of in-situ natural joints, and spatial distribution characteristics of discontinuities were acquired through field investigation. Displacement (horizontal, joint shear), maximum joint opening, maximum and minimum principal stresses, range of relaxed zone, rockbolt axial forces and shotcrete stresses were calculated at each excavation stage. As a result of analysis the calculated values proved to be under the allowable value Rockbolts also proved to be an efficient support measure to control joint shear displacement which had significant effects on extending the relaxed zone. As a consequence, the structural stability of the cavern was assured with an appropriate support system.

• PNF and Movement
• /
• v.15 no.1
• /
• pp.67-75
• /
• 2017

Purpose: The purpose of this study was to determine the effects of a functional movement correction exercise on the functional movement screen scores of badminton players. Methods: The participants consisted of 25 badminton players who were randomly assigned to an experimental group (n = 13) or a control group (n = 12); they engaged in exercise three times per week for eight weeks. The experimental group engaged in the functional movement correction exercise, while the control group engaged in general exercise. An FMS kit (USA) was used to measure the following: FMS score, deep squat, hurdle step, in-line lunge, shoulder mobility, active straight leg raise, trunk stability push up, and rotary stability. Results: The FMS score, deep squat, hurdle step, in-line lunge, shoulder mobility, active straight leg raise, and trunk stability push up, and rotary stability showed significant improvement in the experimental group (p < 0.05). Conclusion: The experiment confirmed that the functional movement screen scores of badminton players improve with effective exercise interventions.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.1
• /
• pp.42-49
• /
• 2021

As a measure of susceptibility on the combustion instability, thermo-acoustic instabilities in rocket combustion system was considered for the estimation of the operational stability margin. Growth rate, which governs the asymptotic stability behavior of the system, was determined from the dynamic data measured during combustion tests in order to understand the dynamic characteristics of combustor system. Frequency transform technique was first applied to determine the system parameters such as growth rate and/or damping coefficient for an interested mode from the time series pressure data, and the PDFs of pressure amplitude were extracted from the amplitude envelope of pressure oscillation for the stochastic analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.6
• /
• pp.489-495
• /
• 2007

An experimental study was carried out in order to measure the pitch dynamic stability derivatives of a standard dynamics model in a low-speed wind tunnel. When a trigger signal is generated, the aircraft model starts oscillation with constant amplitudes and frequencies provided by DC electrical servomotor. The measured data are simultaneously recorded on a data recorder for 25 cycles of the model oscillation. The Phase shift needed to compute the dynamic stability derivatives is determined by calculating differences between the peak values of the input and output signals from the dynamic stability balance. Stabilator effects on the stability derivatives were also investigated with deflection angles. Although the driving apparatus and experimental equipments manufactured creatively for this study are different from other experiments, the variational trend of dynamic stability derivatives with the angle of attack is in a good accordance with the results of TPI, NAE, and FFA.

• Journal of Periodontal and Implant Science
• /
• v.40 no.1
• /
• pp.19-24
• /
• 2010

Purpose: It has been suggested that primary implant stability plays an essential role in successful osseointegration. Resonance frequency analysis (RFA) is widely used to measure the initial stability of implants because it provides superior reproducibility and non-invasiveness. The purpose of this study is to investigate whether the fractal dimension from the panoramic radiograph is related to the primary stability of the implant as represented by RFA. Methods: This study included 22 patients who underwent dental implant installation at the Department of Periodontology of Seoul National University Dental Hospital. Morphometric analysis and fractal analysis of the bone trabecular pattern were performed using panoramic radiographs, and the implant stability quotient (ISQ) values were measured after implant installation using RFA. The radiographs of 52 implant sites were analyzed, and the ISQ values were compared with the results from the morphometric analysis and fractal analysis. Results: The Pearson correlation showed a linear correlation between the ISQ values of RFA and the parameters of morphometric analysis but not of statistical significance. The fractal dimension had a linear correlation that was statistically significant. The correlation was more pronounced in the mandible. Conclusions: In conclusion, we suggest that the fractal dimension acquired from the panoramic radiograph may be a useful predictor of the initial stability of dental implants.