• Journal of the Korean GEO-environmental Society
• /
• v.20 no.6
• /
• pp.5-13
• /
• 2019

The international trend in soil nailed wall design has been evolved from the allowable stress design to limit state design and it is still currently ongoing. The design guidelines in Korea and Hong Kong still adopts the allowable stress design philosophy while those in others mostly do the limit state design. In this study, four soil nail design methods presented in the major design guidelines (U.S. FHWA GEC 7 (2015), Clouterre in France (1991), Soil nailing - best practice guidance in U.K. (CIRIA, 2005), Geoguide 7 in Hong Kong (2008) and Design standard for slope reinforcement work in Korea (KDS 11 70 15 f: 2016)) are described and analyzed in brief. The factor of safety and CDR (Capacity-to-Demand Ratio) which is used to measure the degree of conservatism of a design guide are obtained for the two cases. One is the design example presented in CIRIA (2005) and the other is in-situ loading test performed on the top of backfill of the soil nail wall to investigate the conservatism of design guidelines. It is revealed that the design method in overall stability of soil nail walls in domestic design method (CDR=0.78) is the most conservative and those by Clouterre (CDR=0.99, 1.09), Geoguide 7 (CDR=1.13, 0.97), U.S. FHWA (CDR=1.09, 1.07) and CIRIA (CDR=1.40, 1.16) in order from the second most conservative to the least conservative for the design example presented in CIRIA. For the in-situ loading test performed on the top of backfill of the soil nail wall, the order of conservatism is identical except that the places of Geoguide 7 (CDR=0.66, 0.72) and FHWA (CDR=0.73, 0.72) are changed. However, the results obtained among U.S. FHWA (2015) and Clouterre (1991) and Geoguide 7 (2008) are not so different.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.1
• /
• pp.58-68
• /
• 2015

This study compares the wind stability of Larix kaempferi (Lamb.) Carr., Pinus koraiensis Sie. & Zucc. and Abies holophylla Maxim. to understand and inform wind risk management of these plantation trees at Daegwallyeong, Korea. Temporary square plots of $20m{\times}20m$ ($400m^2$) were laid out, and DBH (Diameter at Breast Height) and height for trees greater than 10 cm in DBH were measured by species. A total of 15 plots with 5 plots each in L. kaempferi, P. koraiensis and A. holophylla stands were sampled at random. Among the species, A. holophylla and P. koraiensis have comparatively lower h/d (Height/DBH) ratios than L. kaempferi. These results indicate that the former two species are more wind firm than the latter species. About 9% of the L. kaempferi trees have higher h/d ratios than the critical threshold limit 80. These trees are vulnerable to wind damage and should be removed in the next thinning regime. The analysis of variance detected a significant difference (p < 0.05) in the h/d ratios and Gini coefficient indicating species differences and DBH size variation, respectively. Gini coefficient was 16.4% in A. holophylla, 15.9% in P. koraiensis and 14% in L. kaempferi stands indicating limited DBH size variation. Lower h/d ratios are attributed to thinning in these stands and tree morphological differences. To increase wind firmness, low thinning should concentrate to remove trees with the h/d ratio above 80 coinciding at the time of stand distinction phase. Forest managers and practitioners should measure and maintain h/d ratios of trees below the critical threshold limit of 80 through stand density management. Variable density thinning approach should be tested to increase tree DBH sizes of the even-aged stands.

• Research in Community and Public Health Nursing
• /
• v.8 no.2
• /
• pp.347-367
• /
• 1997

The purpose of this study was to investigate drug abuse and to find related factors among high school students. The subjects for this study were 973 students from 10 high schools in Taegu city. The data were collected from September 30, 1996 to October 30, 1996. The questionnaire developed by Kim Soyoaja (1991) surveyed adolescent drug use and questions on smoking and drinking were readjusted and added by the researcher based on review. The data was analyzed using frequency, percentage, $X^2-test$, t -test, Pearson Correlation Coefficient with the SPSS /PC+. The results of this study were summarized as follows: 1. The proportion of students who drank alcohol 1-2 times or more per year was 52.4% and smoked Cigarette 1 -2 times or more per year was 20.8%. The 7 different drugs(Analgetics 5.7%. sleeping pills and sedatives 4.2%, antihistamines 1.1%. stimulants 7.7%, hallucinogens 0.8%, inhalants 3.3%, and narcotics 0.6%) were also evaluated. 2. There was a significant relationship between drinking and type of school($X^2$=62.97, p<.0l), grades($X^2$=33.86, P<.001), school life($X^2$= 19.04, p<.001), and delinquent friends($X^2$= 64.72, P<.001). 3. There was a significant relationship between smoking and type of school($X^2$=153.65, p<.001), grades ($X^2$=67.53, p<.001), their respect for teachers ($X^2$=33.80, p<.001) school life($X^2$ =50.87, p<.001), and delinquent friends($X^2$ =85.28, p<.001). 4. There was a significant relationship between the 7 different kinds of drug abuse and type of school ($X^2$=14.65, p<.01), grades($X^2$=12.89, p<.01), their respect for teachers ($X^2$=8.46, p<.05), and delinquent friends($X^2$=22.42, p<.001). 5. There was a significant relationship between a parent's habitual drug abuse and the 7 different kinds of drug abuse($X^2$=7.78, p<.01), as well as a parent's attitude toward drugs and the 7 different kinds of drug abuse($X^2$=6.33, p<.05). 6. There was a significant difference between drinking(t=-12.53, p<.001), smoking(t=-15.98, p<.001), the 7 different kinds of drug abuse(t=-5.77, p<.001), and the respondant's delinquent experience. 7. There was a correlation between drinking and smoking(r=.4166, p<.001), drinking and the 7 different kinds of drug abuse(r=.2200, p<.001), smoking and the 7 different kinds of drug abuse(r=.1428, p<.05). There was a correlation between drinking and smoking(r=.5977, p<.001), drinking and the 7 different kinds of drug abuse(r=.2849, p<. 001), smoking and the 7 different kinds of drug abuse(r=.1711, p<.05) among male students. There was a correlation between drinking and smoking(r=.4219, p<.001), drinking and the 7 different kinds of drug abuse(r=.2611, p<.001), smoking and the 7 different kinds of drug abuse(r=.1764, p<.001) among female students. 8. There was a correlation between drinking and family stability(r=.0709, p<.05) drinkry and parent -child relationships (r=.1321, p<.01), drinking and mother's rearing attitude(r=.0704, P<.05), smoking and parent -child relationships(r=.0813, P<.05). There was a correlation between drinking and family stability(r=.14S7, p<.01), drinkng and parent-child relationships(r=.2147, p<.001), smoking and family stability(r=.1544, p<.01), smoking and parent. -child relationships (r=. 2018, P<.01) among male students. There was a correlation between drinking and family stability(r=.1l21, p<.05), drinking and mother's rearing attitude (r=.0988, P<.05), smoking and parent -child relationships (r=. 0940, P<.05) among female students. 9. There was a significant difference between the 7 different kinds of drug abuse and family stability (t=2.23, p<.05), parent-child relationships (t=4. 34, p<.001), satisfaction with family (t=4.02, p<.001), father's rearing attitude(t=3.04, p<.01), mother's rearing attitude(t=2.87, p<.01). The distribution channel of drugs including alcohol beverages and cigarettes should be evaluated and restructured to discourage student's temptation and to limit accessibility. The step by step preventive teaching on alcohol drinking and cigarette smoking is needed from middle school to help prevent further drug abuse.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.5
• /
• pp.13-21
• /
• 2019

There are many cuts or natural rock slopes that remain stable for a long time in the natural environment with steep slopes ($65^{\circ}$ to $85^{\circ}$). In terms of design practice, the rock mass consisting of similar rock condition and geological structures is defined as a good continuum rock slope, and during the process of decision making angle of this rock slope, it will be important to establish the geotechnical properties estimating method of the continuum rock on the process of stability analysis in the early stages of design and construction. In this study, the stability analysis of a good continuum rock slope that can be designed as a steep slope proposed a practical method of estimating the shear strength by induced from the Hoek-Brown failure criterion, and in addition, the design applicability was evaluated through the stability analysis of steep rock slope. The existing method of estimating the shear strength was inadequate for practical use in the design, as the equivalent M-C shear strength corresponding to the H-B envelope changes sensitively, even with small variations in confining stress. To compensate for this problem, it was proposed to estimate equivalent M-C shear strength by iso-angle division method. To verify the design applicability of the iso-angle division method, the results of the safety factor and the displacement according to the change in angle of the cut slope constructed at the existing working design site were reviewed. The safety factor is FS=16~59 on the 1:0.5 slope, FS=12~52 on the 1:0.3 slope, most of which show a 10~12 percent reduction. Displacement is 0.126 to 0.975 mm on the 1:0.5 slope, 0.152 to 1.158 mm on the 1:0.3 slope, and represents an increase of 10 to 15%. This is a slightly change in normal proportion and is in good condition in terms of stability. In terms practical the working design, it was confirmed that applying the shear strength estimated by Iso-angle division method derived from the H-B failure criterion as a universal shear strength for a good continuum rock mass slope was also able to produce stable and economic results. The procedure for stability analysis using LEM (Limit Equilibrium Analysis Method) and FEM (Finite Element Analysis Method) will also be practical in the rock slope where is not distributed fault. The study was conducted by selecting the slope of study area as a good rock condition, establishing a verification for which it can be applied universal to a various rock conditions will be a research subject later on.

• Analytical Science and Technology
• /
• v.28 no.2
• /
• pp.86-97
• /
• 2015

Recently, the consumption of dietary supplements has increased because of people’s greater interest in health. Unfortunately, the sales of dietary supplements containing unauthorized substances such as drugs have also increased. We developed a rapid, accurate method for the simultaneous determination of antihistamines using liquid chromatography tandem mass spectrometry with a multiple reaction monitoring mode. The limit of detection (LOD) and limit of quantification (LOQ) of the instrument used in this method were in the ranges 0.0003-0.3 and 0.0009-0.6 µg mL⁻¹, respectively. The linearity of the method was > 0.99. The precision levels of the method were 0.1-9.8% (intra-day) and 0.3-9.6% (inter-day), and the levels of accuracy of the method were 82.7-115.0% (intra-day) and 84.3-113.0% (inter-day). The mean of recovery of the method was in the range of 83.9-117.9% and the RSD of the stability was less than 5.9%.

• Journal of Forest and Environmental Science
• /
• v.15 no.1
• /
• pp.98-106
• /
• 1999

This study was carried out to analyze the mechanical properties of soil for counterplan of recovery construction and the slope stability on fill slope of Sang-gul forest road in Mt. Gari. To analyze the mechanical properties of apparent soil on fill slope in forest road, various soils such as soil, gravelly sandy soil, weathered rock were used as experimental sample in this study. In each experimental sample, particle size distribution test, liquid limit test, plastic limit test, and specific gravity test were carried by Korean industrial standards(KS F 2302, KS F 2303, KS F 2304, KS F 2306, KS F 2308). Through the results of soil particle size distribution analysis, soil moisture content analysis, and specific gravity analysis, soil texture, uniformity coefficient, curvature coefficient, dry density and specific gravity were able to be determined in sampling site. As a results in this study, soil was classified as SP, SW, GP by Unified Soil Classification Standard (USCS). specific gravity and dry unit weight of soil have the value range of 2.52~2.60 and 1.39~1.43, respectively. Also plastic index showed non plastic condition.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.2
• /
• pp.127-140
• /
• 2015

A fault is one of the critical factors that may lead to a possible ground collapse occurring in construction site. A fault core, however, possibly acting as a failure plane in whole fault zone, is composed of fractured rock and gouge nonuniformly distributed and thus can be characterized by its wide range of shear strength which is generally acquired by experimental method for stability analysis. In this study, we performed direct shear test and grain size distribution analysis for 62 fault core samples cropped from 12 different spots located in the vicinity of Kyongju and Ulsan, Korea. As a result, the range of shear strength representing the characteristics of fault cores in the study regions is determined with regard to vertical stress using a regression analysis for experiment data. The weight ratio of gravels in the samples is proportional to the shear strength and that of silt and clay is in inverse proportion to the shear strength. For most samples, the coefficient of determination is over 0.7 despite of inhomogeneity of them and consequently we determined the lower limit and upper limit of the shear strength with regard to the weight ratio by setting the confidence interval of 95%.

• Applied Chemistry for Engineering
• /
• v.27 no.2
• /
• pp.221-226
• /
• 2016

Production of eco-friendly and biologically harmless materials is strongly required in all industries. In particular, reducing volatile organic compounds in coating processes is extremely important to secure worker's safety. During recent two decades, extensive research works on water-borne polyurethane dispersion (PUD) have been continuously developed as an alternative to solvent-borne polyurethane. However, PUD was shown inferior mechanical properties to the organic solvent-borne polyurethane due to a limit to the molecular weight increase, which resulted in the limit of applications. To overcome this drawback, several approaches have been examined such as polymer blends and thermal/radiation induced crosslinking. Among these methods, the radiation curing system was suitable for industrialization because of the high crosslinking density and fast curing speed. In this study, we overcame the drawback for PUD via introducing benzophenone radiation curable units to PUD. We synthesized PUD films which possessed good dispersion in water for 30 days, increased Tg and Td more than $5^{\circ}C$ after UV curing film as well as improved young's modulus more than double.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.365-376
• /
• 2021

In general, domestic streams and rivers are composed of alluvial rivers consisting of sand and gravel beds. These rivers can cause erosion and riverbed changes due to sudden changes in flow rates, such as floods, torrential rains, and heavy rains. In particular, there are various types of erosion, such as contraction erosion caused by changes in river shape, or local erosion occurring around obstacles such as piers, abutments or embankments. In addition, river changes can occur in various forms, such as static or dynamic periods, due to limitations such as flow rate, velocity, and shear stress. This study focused on the erosions of embankments directly related to human casualties among various river structures, and evaluated limit velocities and critical shear stress in order to identify changes in strength of natural materials by identifying the characteristics of natural hoan materials and resistance to erosions. In particular, the limitations of materials according to the type of materials in the river, characteristics of particles, and size of particles were studied using Soil loss, which is a change in the volume of the revetment material, and it is intended to be used as basic data for river design and restoration.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.84-84
• /
• 2022

The limit of crop cultivation is moving northward due to the temperature rise by climate change. There is a problem with crop growth if early sowing is performed at a time when the temperature is low. It is difficult to secure crop productivity and cultivation stability due to the low temperature and short cultivation period. Therefore, this study was conducted to analyze the change in growth characteristics and yield of corn for grain when early sowing is performed in central region of South Korea. This experiment was conducted at experimental field of Suwon in 2021. Three varieties of corn for grain such as Kwangpyeongok, Sinhwangok, and Hwangdaok were sown at intervals of 5 days from 20 March to 15 April. The planting density at this time was sown with a row interval of 70 cm and a plant interval of 25 cm. Nitrogen, phosphoric acid, and potassium fertilizers were applied at 17.4 kg, 3.0 kg, and 6.9 kg per 10a, respectively. Phosphoric acid and potassium fertilizers were all applied before sowing and nitrogen fertilizer was applied 50% before sowing and 50% in the fifth leaf period. The corn growth characteristics and yield components were investigated. The seedling establishment rate by sowing date was in the range of 68.5~88.5%, and it showed a difference depending on the variety. The range of days from sowing to tassel and silk emergence by sowing date was 79.9~98.4 and 81.0~98.9 days, respectively. As the sowing date was delayed, the days from sowing to tassel and silk emergence decreased. The growth characteristics and yield of corn by sowing date are as follows. Plant height was the highest at 241.3 cm at the sowing on 25 March, and Stalk diameter was the thickest at 25.6 mm at the sowing on 31 March. The fresh weight per plant was the highest at 728 g at the sowing on 25 March, and the dry weight per plant was the highest at 185 g at the sowing on 31 March. Corn growth characteristics did not show a certain trend depending on the sowing date, and corn growth was more vigorous at the sowing on March 25 and 31 than the others. In the case of ear weight, it was the heaviest with 344 g at the sowing on 25 March, and filled ear length ratio showed a tendency to decrease as the sowing time was delayed. The weight of 100 grains and grain yield per 10a of maize were the highest at 36.0g and 878.7kg/10a, respectively at the sowing on 25 March. Although the growth and yield of corn for grain were good during early sowing in the central region of South Korea, it is necessary to investigate the limit temperature for early sowing of corn by examining the annual variation according to weather conditions.