• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.202-203
• /
• 2005

To recognize whether admixture affects some $(Ba_{0.6}Sr_{0.4})TiO_3$, powder in this research $Li_2CO_3$, MgO, $MnO_2$ adding each 3 wt % by Tape casting method thick film make. Sitering temperature lowered 1300$^{\circ}C$ adding $Li_2CO_3$, and density is 5.942g/$cm^3$, and specific inductive capacity increases about decuple and displayed 4000. Climbed sitering temperature 1400$^{\circ}C$ adding MgO, specific inductive capacity reduced 1/2 times. Lowered sintering temperature 1325$^{\circ}C$ low adding $MnO_2$.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.15-17
• /
• 2005

In this study, tunable dielectric materials are important for resonator, variable capacitor, phased array antenna and other devices application. In this paper, Dielectric constant increased and tuning range increased with the increased of $BaSrTiO_3/Li_{2}CO_{3}$ content, which probably can be explained by the substitution of Ba3+, Li1+ on BaTiO3 lattice. The tunability and dielectric loss of the $BaSrTiO_2/Li_{2}CO_{3}$ thick film, sintered at $1150^{\circ}C$, were about 43 % and 0.234 at 10$\sim$15 MHz, respectively. In case of BaSrTi/MgO, Dielectric constant decreased and tenability increased with the added of $BaSrTiO_3/MgO$. The ferroelectrics properties were distinct when adding Li to BST ceramic thick film, and paraelectrics pattern was distinct when adding Mg.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.55-55
• /
• 2003

Ferroelectric 물질은 고유전성, 자발분극과 전기장에 따른 유전상수의 변화 등의 특성을 가지고 있으므로 많은 연구가 진행중이다. 이러한 ferroelectric 물질의 유전 특성에 미치는 요소로는 물질의 조성비, 박막의 스트레스, 결정성 등이 있다. 특히 스트레스에 대한 연구가 활발히 진행중이다. 본 연구에서 산화물 인공격자를 이용하여 단일박막에서 얻을 수 없는 격자변형도를 얻어 격자 변형이 박막의 유전특성에 미치는 영향을 연구하였다. BaTiO$_3$ (BTO)/SrTiO$_3$ (STO) 산화물 인공격자를 Pulsed laser deposition (PLD)법으로 (La,Sr)CoO$_3$ 전극이 코팅된 MGO (100) 단결정 기판위에 증착시켰다. 적층 주기에 변화를 주어 BTO와 STO 각각 1.01~1.095와 0.925 ~ 1.003의 단일 막에서는 얻을 수 없는 격자 변형도를 얻었다. 이 실험적 데이터를 기초로 하여 density functional theory (DFT)라고 불리는 범함수밀도론를 기초한 제일원리적 계산 방법을 통하여 격자 변형된 SrTiO$_3$의 구조적, 전기적 특성을 계산하였다. SrTiO$_3$와 BaTiO$_3$ 격자의 안정성을 분석하기 위하여 Vienna Ab-intio Simulation Package (VASP) code가 사용되었다. SrTiO$_3$와 BaTiO$_3$ 산화물 격자의 안정성 분석 후, frozen-phonon 계산 방법을 사용하여 zone-centered optical phonon mode가 계산되었으며, mode effective charge는 Berry-phase polarization 으로부터 얻어졌다. SrTiO$_3$ 격자가 격자변형이 일어나지 않은 상태로부터 c/a= 0.985로 격자 변형 이 일어남에 따라 optical phonon mode는 점차 hardening되었다. BaTiO$_3$ 격자의 경우 SrTiO$_3$ 격자와는 달리 격자 변형이 1.01~1.023으로 진행됨에 따라 optical phonon mode의 증가를 가져왔으나 Born effective charge의 증가하였으며, 더 이상 격자 변형이 진행됨에 따라 optical phonon mode의 감소를 가져왔으나 Born effective charge의 증가 유전상수는 증가했다. 격자 변형이 SrTiO$_3$ 와 BaTiO$_3$ 산화물 격자의 optical phonon mode와 Born effective charge에 크게 영향을 미쳤다.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.94-96
• /
• 2002

The $0.97MgTiO_3-0.03SrTiO_3$ ceramics with $B_2O_3$(10wt%) were prepared by the conventional mixed oxide method. The structural properties were investigated with sintering temperature by XRD and SEM. According to the X-ray diffraction patterns of the $0.97MgTiO_3-0.03SrTiO_3$ ceramics with $B_2O_3$(10wt%), the ilmenite $MgTiO_3$ and perovskite $SrTiO_3$ structures were coexisted and secondary phase $MgTi_2O_5$ were appeared. Increasing the sintering temperature. the grain size was increased. In the case of $0.97MgTiO_3-0.03SrTiO_3$ ceramics with $B_2O_3$(10wt%), dielectric constant, quality factor and temperature coefficient of resonant frequency were $13.52{\sim}18.13,\;32750{\sim}51736GHz$, $-15.78{\sim}25.64ppm/^{\circ}C$, respectively.

• Journal of Sensor Science and Technology
• /
• v.32 no.4
• /
• pp.238-245
• /
• 2023

0.75(Bi_1/2Na_1/2)TiO₃-0.25SrTiO₃ (BNT-25ST) ceramics with high densities were successfully prepared at a sintering temperature of 1,000℃ by adding a mixture of 1 mol% CuO and 0.5 mol% Na₂CO₃ or 0.5 mol% CuO and 0.25 mol% Na₂CO₃. Double polarization-electric field (P-E) hysteresis curves and sprout-shaped bipolar strain-electric field (S-E) hysteresis curves with small negative strains were observed in the pristine and CuO-added BNT-25ST ceramics whereas the Na₂CO₃-added sample showed similar P-E and S-E curves to a typical ferroelectric. The pristine BNT-25ST ceramics showed an extremely large strain and a large-signal piezoelectric strain constant (d₃₃^*): 0.287 % at 80 kV/cm and 850 pm/V at 20 kV/cm. Similar values, 0.248 % at 80 kV/cm and 655 pm/V at 20 kV/cm, were obtained in the CuO-added sample. However, the pristine and CuO-added samples showed large hysteresis in unipolar S-E curves at an electric field of less than 20 kV/cm. The Na₂CO₃-added sample showed smaller values of the strain and d₃₃^* but displayed a linear change and small hysteresis in the unipolar S-E curve. The co-added sample with CuO and Na₂CO₃ displayed intermediate P-E and S-E hysteresis curves.

• Journal of the Korean Magnetics Society
• /
• v.22 no.2
• /
• pp.37-41
• /
• 2012

The Ag nanoparticles attached $La_{0.7}Sr_{0.3}Co_{0.3}Fe_{0.7}O_{3-{\delta}}$ (LSCF) perovskites were prepared by plasma method. The Ag nanoparticles with size of several nanometers deposited from the Ag target were coated on the surface of LSCF powders with size range from 0.2 to 3 ${\mu}m$. The agglomeration of Ag particles annealed at $800^{\circ}C$ under inert gas of Ar were rarely observed. The inter-diffusion between surface Ag and core LSCF is effectively strong to prevent aggregation of Ag nanoparticles. The wave number of FT-IR spectra for LSCF were largely shifted as the concentration of Ag on LSCF up to 2.11 wt.%. The ionic states of irons in LSCF were measured by M$\ddot{o}$ssbauer spectroscopy. The small amount of $Fe^{4+}$ ions are converted to $Fe^{3+}$ ions after Ag nanopartcles were coated on LSCF.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05d
• /
• pp.49-52
• /
• 2003

BiSrCaCuO superconducting thin films have been fabricated by co-deposition using IBS(Ion Beam Sputtering) method. Despite setting the composition of thin film Bi2212 or Bi2223, in both cased, Bi2201, Bi2212 and Bi2223 phase were appeared. It was confirmed the obtained field of stabilizing phase was represented in the diagonal direction of the right below end in the Arrhenius plot of temperature of the substrate and $PO_3$ and it was distributed in the reeone.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2021-2025
• /
• 2007

Performance of single cell at solid oxide fuel cell (SOFC) system is largely affected by electrocatalytic and thermal properties of cathode. Samarium-based perovskite oxide material is recently recognized as promising cathode material for intermediate temperature-operating SOFC due to its high electrocatalytic property. Perovskite structured $Sm_{0.5}Sr_{0.5}CoO_{3-\delta}$ and its composite material, $Sm_{0.5}Sr_{0.5}CoO_{3-\delta}/Sm_{0.2}Ce_{0.8}O_{1.9}$ were investigated in terms of area specific resistance (ASR), thermal expansion coefficient (TEC), thermal cycling and long term performance. $Sm_{0.2}Ce_{0.8}O_{1.9}$ was used as electrolyte material. Electrochemical ac impedance spectroscopy (EIS) and dilatometer were used to measure the cathodic properties. Composite cathode ($Sm_{0.5}Sr_{0.5}CoO_{3-\delta}$: $Sm_{0.2}Ce_{0.8}O_{1.9}$ = 6:4) showed a good ASR of 0.13${\Omega}$ $cm^2$ at 650$^{\circ}C$ and its TEC value was 12.3${\times}$10-6/K at 600$^{\circ}C$ which is similar to the value of ceria-based electrolyte of 11.9${\times}$10-6/K. Performance of composite cathode was maintained with no degradation even after 13 times thermal cycle test.

• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.787-793
• /
• 2001

$La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ membranes were fabricated by solid-state reaction. We investigated sintering behavior and oxygen permeation flux as a function of time-on-stream, temperature and upstream oxygen partial pressure. The oxygen was permeated at temperatures form 750$^{\circ}$C to 950$^{\circ}$C by mixed conducting through oxygen vacancy diffusion in the dense membrane. The oxygen permeation flux through the membrane were about 0.1ml/$cm^3{\cdot}$min at 850$^{\circ}$C. A constant time was required for reaching stable oxygen flux, and oxygen partial pressure affected the oxygen permeation fluxes.

• Journal of Korea Foundry Society
• /
• v.30 no.5
• /
• pp.161-166
• /
• 2010

In this examination, the effect of Sr addition and holding time on microstructure of Al-10.5wt%Si-2wt%Cu secondary die-casting alloy was investigated. Degree of undercooling was improved with increasing the Sr content in this alloy. Up to 0.02wt%Sr addition, acicular and lamellar eutectic structure was observed in the microstructure. Meanwhile, the eutectic Si was modified toward the fine fibrous form by increasing Sr content with more than 0.03wt% and holding time of the melt. The well- modified alloys showed decreased eutectic silicon size from 3.25 ${\mu}m$ to less than 0.8 ${\mu}m$. From these results, the optimal strontium content and holding time were identified on the Al-10.5wt%Si-2wt%Cu secondary die-casting alloy.