• 동력기계공학회지
• /
• 제21권5호
• /
• pp.63-70
• /
• 2017

This paper deals with anti-pinch system based on current information which prevents some risks for trapping, squeezing or injury to people in smart window on vehicles. Automatic configuration of current threshold is suggested to recognize pinch states in the current based anti-pinch system. Also, some factors affecting to the squeezing force were analyzed by some experimental results and simulations. The validity of the suggested system was verified to satisfy the strengthened American safety regulation, FMVSS 118-S5, through some experimental results.

• Geomechanics and Engineering
• /
• 제29권1호
• /
• pp.41-51
• /
• 2022

Tunneling in rocks having the time-dependent behavior, causes some difficulties like tunnel convergence and, as a result, pressure on concrete lining; and so instability on this structure. In this paper the time-dependent behaviour of squeezing phenomenon in a large cross section tunnel was investigated as a case study: Alborz tunnel. Then, time-dependent behaviour of Alborz tunnel was evaluated using FLAC2D based on the finite difference numerical method. A Burger-creep viscoelastic model was used in numerical analysis. Using numerical analysis, the long-time effect of squeezing on lining stability was simulated.This study is done for primary lining (for 2 years) and permanent lining (for 100 years), under squeezing situations. The response of lining is discussed base on Thrust Force-Bending Moment and Thrust Force-Shear Force diagrams analysing. The results determined the importance of consideration of time-dependent behaviour of tunnel that structural forces in concrete lining will grow in consider with time pass and after 70 years can cause instability in creepy rock masses section of tunnel. To show the importance of time-dependent behavior consideration of rocks, elastic and Mohr-Coulomb models are evaluated at the end.

• Tribology and Lubricants
• /
• 제39권6호
• /
• pp.273-277
• /
• 2023

This paper presents a molecular dynamics simulation-based numerical investigation of the influence of surface energy on water lubrication. Models composed of a crystalline substrate, half cylindrical tip, and cluster of water molecules are prepared for a tribological-characteristic evaluation. To determine the effect of surface energy on lubrication, the surface energy between the substrate and water molecules as well as that between the tip and water molecules are controlled by changing the interatomic potential parameters. Simulations are conducted to investigate the indentation and sliding processes. Three different normal forces are applied to the system by controlling the indentation depth to examine the influence of normal force on the lubrication of the system. The simulation results reveal that the solid surface's surface energy and normal force significantly affect the behavior of the water molecules and lubrication characteristics. The lubrication characteristics of the water molecules deteriorate with the increasing magnitude of the normal force. At a low surface energy, the water molecules are readily squeezed out of the interface under a load, thus increasing the frictional force. Contrarily, a moderate surface energy prevents expulsion of the water molecules due to squeezing, resulting in a low frictional force. At a high surface energy, although squeezing of the water molecules is restricted, similar to the case of moderate surface energy, dragging occurs at the soil surface-water molecule interface, and the frictional force increases.

• 유변학
• /
• 제11권2호
• /
• pp.82-90
• /
• 1999

전기유변 유체(electorheological fluid)는 전기장이 가해지면 아주 짧은 시간에 유변 물성이 급격히 변하며 그 응답이 반복적으로 수행될 수 있는 유체이다. 전기유변 유체는 전기장의 세기에 따라 면찰 응력(shear stress)과 점도의 크기를 조절할 수 있고, 짧은 응답시간은 빠른 제어를 요하는 분야에 효과적으로 이용될 수 있지만, 낮은 항복 응력, 조업 온도 범위의 제한성, 전력 소비에 의한 열적 불안정성, 그 외에도 응집, 침전 등의 단점이 있다. 특히, 이 유체가 갖는 항복 응력의 크기와 그 성질은 실제 장치에 응용하는데 중요한 특성이다. 이러한 문제점을 해결하기 위해 면찰 유동(shear flow)이 아닌 압착 유동(squeezing flow)을 고려하게 되었고, 이 유동 하에서의 전기유변 유체의 거동을 이해하기 위해 본 연구에서는 전기유변 유체의 압착 유동에 대한 동적 수치모사를 수행하였다. 고립된 사슬 구조에 대한 수치모사를 통하여 사슬의 위치와 압착 속도를 변화 시키면서 이에 따른 수력학적 힘과 정전기적 힘의 효과를 예측하였으며, 이를 토대로 많은 사슬을 포함한 현탁액 모델에 대한 수치모사를 수행하였다. 그 결과 실험에서 관찰할 수 있는 수직 응력의 증가와 초기 항복 응력의 존재를 확인하였고, 수직 응력의 효과적인 제어는 수력학적 힘과 정전기적 힘 간의 최적화된 조건에서 얻어질 수 있음을 예측하였다. 이러한 수치모사의 개발을 통해 압착 유동을 이용한 전기유변 유체의 응용에 대한 이론적인 토대를 마련하였고, 향후 보다 깊은 이해를 위한 기반을 구축할 수 있었다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.123-124
• /
• 2002

A press shoe is an element of a machine for squeezing water from wood pulp in the field of manufacturing paper. This is used to compress the pulp enveloped by felt sheet with a large roller. The squeezing force is made by hydraulic pressure. The press shoe has a mechanism similar to a partial hydrostatic bearing. The pressure profile between press shoe and roller affects their squeezing ability, and partial peak pressure can tear the wet pulp. The curvature of the surface of press shoe varies to reduce the peak pressure and increase the mean pressure simultaneously. Therefore, the prediction of pressure distribution considering partially changed curvature of hydrostatic bearing is very important for designing the press shoe. In this study, the difference formulation of Reynolds' equation for partial hydrostatic bearing is by direct numerical method and a computer program to calculate the pressure distribution is developed. We investigate the effect of partially changed curvature of bearing surface on the pressure distribution. Other design parameter for hydrostatic bearing such as depth of pocket and relative velocity are also studied.

• 대한심미치과학회지
• /
• 제30권2호
• /
• pp.91-101
• /
• 2021

치간유두의 Connective Tissue Graft (CTG)는 좁은 공간 때문에 아주 까다롭다. 그래서 치간유두의 재생은 아주 도전적인 과제라고 생각한다. 이렇게 인접치와의 좁은공간에서 잇몸이식은 아주어렵지만, 3mm의 공간을 만들 수 있다면 CTG는 그렇게 어렵지 않다. 그래서 교정력을 이용하여 임시적으로 3mm의 공간을 만들어 주고 잇몸이식을 진행하였다. CTG는 마이크로블레이드를 이용하여 치은박리를 시행하였고, 치아사이의 공간에 수직절개를 만들어 그곳을 이용해서 결합조직을 이식하였다. 유지기간후에 교정력을 이용해 다시 치아사이의 공간을 모아서 치아를 배열하였다. 이 방법을 통해 치아사이의 치간유두를 재생하였고 이 술식을 이름을 ELSA (Enlargement of space - Labial graft - Squeezing - for Augmentation of papilla)로 이름지었다. 치주질환 등으로 치간유두가 소실된 경우, ELSA technique을은 치간유두를 재생하는 아주 효과적인 방법이다.

• 동력기계공학회지
• /
• 제14권5호
• /
• pp.63-70
• /
• 2010

Recently the power window system is widely used in automobiles to increase convenience of passengers and drivers. However some accidents or injuries have been caused by malfunction or misusage of the system. Therefore safety regulations of the system to cope up with these accidents have been strengthened gradually in many countries. Especially in America, since 2005, all vehicles which had power window system should be contented with FMVSS 118-S5 regulations. We suggest very low-cost anti-pinch window control system satisfying the regulation in this paper. Hall sensors are used and installed around a motor rotor with ring magnet to detect motor speed for anti-pinch. The optimum number of hall sensor and location angel of them are mainly investigated to get sufficient speed resolution for anti-pinch. Through some experiments, the validity of the suggested system was verified to satisfy the regulation.

• Structural Engineering and Mechanics
• /
• 제12권6호
• /
• pp.595-614
• /
• 2001

This paper studies the behaviour of a homogeneous cable in a horizontal rigid duct and loaded by an axial compressive force. This behaviour is characterized by spatial buckling modes, named sinusoidal and helical, due to friction and total or partial cable locking. The evaluation of critical buckling loads involved by drilling technology has been studied by many authors. This work presents a new formulation, taking the friction effects into account, for the transmission of the axial load during the postbuckling process. New analytical expressions of pitches in both buckling cases are also given. A life-sized bench is presented, which permits to study the laying of optical fiber cables by squeezing them into an underground duct. Finally, analytical solutions are compared with experimental tests and finite element simulations.

• 동력기계공학회지
• /
• 제16권1호
• /
• pp.98-105
• /
• 2012

안티핀치 시스템은 파워 윈도우 상승 시에 인체의 특정 부위가 창문 틈 사이에 끼여 발생하는 치명적인 사고를 방지하기 위한 안전 시스템이다. 이러한 안티핀치 시스템은 물체의 끼임을 검출하는 센서 방식에 따라 접촉식과 비접촉식 두 가지로 크게 구분된다. 본 논문에서는 접촉식의 한 방법으로 전류 정보에 의해 강화된 미국의 안전 규정 FMVSS 118-S5를 만족하는 안티핀치 시스템을 제안한다. 안티핀치 시스템에 사용된 전류 정보는 추가적인 장치의 부착 없이도 기존의 파워 윈도우용 모터 드라이브에 내장된 과전류 검출용 전류 센서를 이용하여 쉽게 얻을 수 있다. 또한 전류 정보는 물체의 끼임을 신속히 검출, 반영함으로써 안티핀치 시스템에 요구되는 반전력 저감에 기여한다. 특히, 본 논문에서는 전류의 임계값이 모터 경년 변화나 운전 조건에 따라 변동하는 문제점을 개선하기 위해 핀치 상태를 효과적으로 판정할 수 있는 자동 임계값 설정 방법을 제안한다. 마지막으로 다양한 실험 및 시험을 통해 제안된 안티핀치 시스템이 FMVSS 118-S5를 만족함을 보인다.

• 한국주조공학회지
• /
• 제24권6호
• /
• pp.331-339
• /
• 2004

Melt-extrusion process, a metallic melt poured and solidified up to semisolid state in the container can be directly extruded through the die exit to form a product of bar shape without other intermediate processes. In this study, the fabrication characteristics of the process were evaluated with various process parameters, such as preheating temperature of extrusion dies, extrusion temperature and extrusion ratio. AI-Cu alloys were successfully extruded after squeezing out of liquid during melt-extrusion with smaller force compared to the solid extrusion. Soundly AI-Cu alloy bar was fabricated at the preheating temperature of $500{\sim}520^{\circ}C$. The range of extrusion temperature for soundly melt-extruded AI-Cu alloy bar was increased with increasing extrusion ratio. Mechanical properties of melt-extruded AI-Cu alloy bars were found change with Cu content of the melt-extruded bars due to the occurrence of segregation. The various extrusion temperature yielded equiaxed structure with a grains size about 200 ${\mu}m$.