• Journal of Ocean Engineering and Technology
• /
• v.21 no.4
• /
• pp.1-7
• /
• 2007

Based on the eigenfunction expansion method, the wave-absorbing performance of a square or circular pile breakwater was investigated. Flow separation resulting from sudden contraction and expansion is generated and is the main cause of significant energy loss. Therefore, evaluation of an exact energy loss coefficient is critical to enhancing the reliability of the mathematical model. To obtain the energy loss coefficient, 2-dimensional turbulent flow is analyzed using the FLUENT commercial code, and the energy loss coefficient can be obtained from the pressure difference between upstream and downstream. It was found that energy loss coefficient of circular pile is 20% that of a square pile. To validate the fitting equation for the energy loss coefficient, comparison between the analytical results and the experimental results (Kakuno and Liu, 1993) was made for square and circular piles with good agreement. The array of square piles also provides better wave-absorbing efficiency than the circular piles, and the optimal porosity value is near P=0.1.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.361-365
• /
• 2002

Advancements in silicon phase control (SCR) technologies provide an arc welding power supply that has the capability to allow the alteration of the Alternating Current (AC) welding output. These technologies provide a square wave output involving sixteen frequency selections and multiple balance selections. While an AC out put is known to minimize magnetic disturbances associate with Direct Current (DC), the potentials of a non-sinusoidal waveform have not been explored. The focus of the paper is to determine the effects that the frequency and balance of an AC wave form output will have upon a high speed Submerge Arc (SAW) application. The test matrix of the project includes welding .250" steel plate. Joint type is square groove with a travel speed of 65 IPM. Each of the weld parameters was held constant, only the frequency and/or balance were altered between welds. Each frequency/balance combination involved three-gap spacing. Upon completion of the welds the bead profiles were measured and recorded. A relationships/trends were observed with various frequency and balance values. Optimum frequency and balance values were found for the .250" square groove application which permit consistent weld sizing, ease of slag removal, and minimal plate distortion.

• Korean Journal of Food Science and Technology
• /
• v.39 no.5
• /
• pp.506-514
• /
• 2007

In this study, carrot juice was treated with high voltage pulsed electric fields (PEF) and the changes in its physical and chemical properties during storage at $4^{\circ}C$ and $25^{\circ}C$ were investigated. The sterility fur bacteria, yeast and mold in carrot juice increased with increasing electric field strength and treatment temperature. While yeast and mold were completely inactivated at 65kV/cm with a treatment time of $200{\mu}s$ in a continuous PEF treatment system, bacteria were reduced by four log cycles. The results also showed that square wave pulse treatment was more effective for inactivating microorganisms than exponential decay pulse, and this effect was more apparent for carrot juice of lower pH. Although we observed significant changes in physical and chemical properties such as soluble solid content, pH, acidity, color, and carotene retention when the PEF treated samples were stored at the ambient temperature $(20^{\circ}C)$, no significant physical and chemical changes were found at the cold storage temperature $(4^{\circ}C)$ during 28 days of storage. The results indicate that the PEF treated carrot juice is appropriate for commercial refrigerated storage.

• Water for future
• /
• v.22 no.4
• /
• pp.441-451
• /
• 1989

Using the wave data by typhoons LEE, VERA, THELMA which gave great damages in the Korean penisula, the significant waves based on zero-up & down crossing and Tucker-Draper method are compared with those from the wave energy spectrum. And the histograms of individual waves obtained from zero-up crossing method are presented and compared with the Rayleigh, Weibull, Gluhovski, Ibrageemov and Goda distributions, and also the Chi-square goodness of fit test is applied to each theoretical distributions. It is shown that the significant wave heights by zero-up crossing method are very well agreed to those by energy spectrum method. The wave heights are found to well follow the Rayleigh and Goda distributions by the Chi-square test.

• Journal of computational fluids engineering
• /
• v.15 no.2
• /
• pp.62-70
• /
• 2010

Secondary instability in the flow past two square cylinders in side-by-side arrangements is numerically studied by using a Floquet analysis. The distance between the neighboring faces of the two cylinders (G) is the key parameter which affects the secondary instability under consideration. In this paper, we present the critical Reynolds number for the secondary instability and the corresponding spanwise wave number of the most unstable (or least stable) wave for each G. Our results would shed light on a complete understanding of the onset of secondary instability in the presence of two side-by-side square cylinders.

• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.281-288
• /
• 2010

This paper investigates the performance of IEEE 802.11p wireless access in vehicular environments (WAVE) system in small-scale fading models reported by Georgia Institute of Technology (Georgia Tech). We redesign the small-scale fading models to be applied to the computer simulation and develop the IEEE 802.11p WAVE physical layer simulator to provide the bit error rate and packet error rate performances. Moreover, a new channel estimator using decision directed channel estimation and linear minimum mean square error smoothing is proposed in order to improve the performance of the conventional least square channel estimator using two identical long training symbols. The simulation results are satisfactorily coincident with the scenarios of Georgia Tech report, and the proposed channel estimator significantly outperforms the conventional channel estimator.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.355-359
• /
• 2000

This paper deal with the harmonic reduction technique in three-phase square-wave inverter system formed by single-phase inverter. To reduce the harmonics six single-phase inverters are used for forming multi-phase inverter and zig-zag connected output transformer for eliminating the harmonic 6(2k-1)$\pm$1 orders. And an ac filter is furnished at output side. Computer simulations show that the THD of the output voltage can be reduced immensely.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.745-747
• /
• 2001

This paper deals with the dynamic characteristics of flat core LOA. The LOA system was represented by the voltage equation of coil and the mechanical equation of motion. Also, driving system was simply composed voltage source inverter and generates square-wave. It is measured that dynamic characteristic vary as square-wave.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2562-2564
• /
• 1999

We have development the electronic ballast for metal halide discharge (MHD) lamp. The ballast consists of the boost pre-converter for power factor correction (PFC), a flyback a converter, half-bridge inverter and ignitor. To reject acoustic resonance phenomena, we have designed electronic ballast driving with the low frequency square wave. As results of this study, the ballast had not flicker phenomena and promoted corrected the factor (PF) highly

• Journal of the Korean Society of Safety
• /
• v.10 no.2
• /
• pp.77-83
• /
• 1995

An electrostatic reducer of a multi-pole high DC voltage applied type and a high frequency square wave voltage applied type have been studied to eliminate effectively and safely electrostatic charge on a dummy charged material. As a fundamental experiments, measurement were made on the decay time as a function of distance between electrostatic reducer and charged body, skewed angle of electrostatic reducer installed and wind speed of generated ions(＋ or －) by electrostatic reducer with high DC voltage and high frequency square wave voltage. Based oil the results above, a appropriate installation and method were produced as a trial for factory.