• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.73-74
• /
• 2016

본 논문에서는 DTV용 광대역 사각형 루프 안테나에 대한 설계 방법에 대하여 연구하였다. 제안된 루프 안테나는 사각형 루프 안테나와 중앙 급전점과 연결하는 원형 섹터가 결합된 형태이다. DTV응용을 위해 75옴 입력 임피던스와 정합하도록 입력 반사계수와 이득 특성을 분석하였다. 최적화된 안테나를 FR4 기판에 설계하였고, 전압 정재파비(VSWR; voltage standing wave) < 2인 대역이 464-1,310 MHz으로 DTV 대역(470-806 MHz)에서 동작하는 것을 확인하였다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 봄 학술발표논문집 Vol.30 No.1 (C)
• /
• pp.160-162
• /
• 2003

Magic Square는 자원 탐색을 제공하는 P2P 프로토콜이다. 그러나 복구비용이 높고 인접한 하나 이상의 노드가 고장났을 경우에는 복구하지 못한다. 본 논문에서는 Magic Square의 복구를 위한 정보를 저장하는 복구 노드를 사용하였다. 복구 노드는 관리하는 영역 전체의 라우팅 테이블을 유지하기 때문에 노드가 고장이 나더라도 즉시 연결을 복구할 수 있다. 본 논문에서 제안하는 방법은 시스템의 성능을 떨어뜨리지 않고 모든 링크 복구와 대부분의 자원 복구를 할 수 있는 장점이 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
• /
• pp.261-264
• /
• 2001

In this paper, we introduce a simple design method f9r mot-squared type raised cosine filter with equiripple characteristics. Through some design examples, we show that the proposed filter has much better performance in ripple than the conventional SRCF at the expense of small increasing of ISI. In addition, the proposed Inter is compatible with conventional SRCF. Finally, we designs the filter for W-CDMPI which uses RRC (Root Raised Cosine) with a=0.22, in 12bit finite precision.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.333-336
• /
• 2001

This paper reports that the Lambert W function applies to a non-iterative design of minimum mean square-error scalar quantizers for a Laplacian source. The contribution of the paper is in the reduction of the time needed for the design and the increased accuracy in resulting quantization points and thresholds, because the algorithm is non-iterative and the Lambert W function can be evaluated as accurately as desired.

• Journal of information and communication convergence engineering
• /
• 제14권4호
• /
• pp.222-226
• /
• 2016

A design method for a compact square loop antenna fed by a microstrip (MS) line for indoor digital television (DTV) applications is proposed. The proposed antenna consists of a square loop, circular sectors, and an MS line. The square loop combined with circular sectors is printed on one side of a substrate, and a $75-{\Omega}$ MS line is printed on the other side. The circular sectors are used as a wideband balun or transition to connect the MS line and the square loop. A prototype of the proposed square loop antenna operating in the DTV band (470-806 MHz) is designed and fabricated on an FR4 substrate. Experimental results show that the proposed antenna has the desired impedance characteristics in the frequency band of 464-1,220 MHz (89.8%) for a voltage standing wave ratio (VSWR) of <2 covering the DTV band, and a broadside gain of 0.8-3.3 dBi in the DTV band.

• 패션비즈니스
• /
• 제19권5호
• /
• pp.199-212
• /
• 2015

Environmentally-friendly whole-cut designs can minimize carbon dioxide emissions which are harmful to the earth, and reduce energy, labor force and time in cutting or sewing clothes. The design and way of wearing clothing will be investigated by classifying whole-cut clothing appearing in the history of costume and past traditional outfits such as Drapery, a Pancho, Tunic, or Loincloth. According to the results from the analysis of whole-cut methods applied in design, they were classified as follows: whole-cut, utilizing square-panels as is, pleats, smoking, lip band, origami, cutting way, and subtraction-cutting whole-cut design. The whole-cut design utilizing square panel as it is can minimize the waste of energy and material but can also maximize the possibility of circulation by recycling. In utilizing an all square panel, it broke away from the existing whole-cut in the western pattern, namely, the pattern of clothes clinging to the body, and was found to have new aesthetic value with a new approach. Due to the whole-cut method having a restriction in the use of dart and line cutting in its designing process, there were only designs that did not show the body line, such as designs clinging to the body. Therefore we developed a design similar to those that cling to the body by whole-cut, In addition, the work produced was with high efficiency and variability, which produces simple designs but can be worn in a variety of ways.

• 소성∙가공
• /
• 제7권4호
• /
• pp.375-381
• /
• 1998

This paper presents development of finite element simulation program and analysis of hot extrusion through square dies with a mandrel. The design of extrusion dies is still an art rather than science. Die design for a new extrusion process is developed from through in-plant trials. In the present paper, a three-dimensional steady-state finite element simulation program is developed. Steady-state assumption is used for both the analyses of deformation and temperature. The developed program is effectively used to simulate hollow extrusion of several sections. Distributions of temperature effective strain rate, mean strain rate and mean stress are studied for an effective design of extrusion dies.

• 대한전자공학회논문지TC
• /
• 제49권8호
• /
• pp.65-69
• /
• 2012

회전 변환된 정사각 QAM 신호 성좌를 클리핑하여 좌표 축 인터리브 된 직교 설계(Coordinate Interleaved Orthogonal Design; CIOD)에 적용되는 낮은 최대 전력 대비 평균 전력 비(Peak-to-Average-Power Ratio; PAPR)을 가지는 신호 성좌를 설계한다. 본 논문에서 제안하는 신호 성좌는 기존의 회전 변환된 정사각 QAM 신호 성좌에 비해 매우 낮은 PAPR을 가질 뿐 아니라, 기존의 신호 성좌와 거의 동일한 비트 오율(Bit Error Rate; BER) 성능을 가진다.

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1232-1240
• /
• 2002

Recently, linear motors are applied to many small precision products. Thus high generating power with small size is required of it. In order to increase the motor efficiency, the design variables need to be optimized. In this study, Vector Fields FEM software, OPERA-3d, was used for simulating linear motor. The thrust and magnetic flux density at the air-gap center were simulated and compared with the experimental results. Taguchi method was applied to investigate the effects of each variables. As a result, the thickness of conductor and magnet was important for the thrust but the thickness of the yoke. The temperature of the conductor was determined by finding the thermal conductivity that was determined by experimentation. Correlation equation relating to the thrust and temperature was proposed by Latin square and Least Square method. The optimum design variables were determined by correlation equation, and compared with simulation results. According to this analysis, thrust force of linear motor was improved about 7% comparing with conventional model.

• 패션비즈니스
• /
• 제28권2호
• /
• pp.64-75
• /
• 2024

Clothing is a powerful medium that reflects the environment, situation, and trends of the times. It has been an important subject of semiotic analysis, particularly in East Asia. While Korea, China, Japan, and Mongolia are geographically close, they have each developed unique characteristics in their clothing. These characteristics continue to evolve over time. The purpose of this paper is to explore the modern fashion design characteristics of these four East Asian countries by using the Greimas symbol square. To achieve this, the paper follows a research method consisting of several steps. First, it considers previous studies on the topic. Second, it analyzes fashion collections from Paris, Milan, New York, and London, as well as the Seoul and Cruise collections, from 2013 to 2024. Third, it compares costumes and modern fashion designs of brands known for their East Asian influences. Finally, it applies the framework of the Greimas symbol square to analyze the main elements of dress culture in these four countries and their significance in modern fashion collections. The findings of this study reveal that East Asian costume culture can be summarized into four distinct characteristics in modern fashion. Korea is characterized by "moderation," China by "exaggeration," Japan by "distinctiveness," and Mongolia by "symbolism."