• 한국항해항만학회지
• /
• 제32권6호
• /
• pp.481-487
• /
• 2008

선박용 무선 LNA은 설비의 용이성 원가절감, 다양한 기능성에 따라 각광 받고 있다. 본 논문에서는 무선 LAN 주파수인 2.4 GHz대역과 5 GHz대역의 이중 대역통과 필터를 사각패치를 적용한 이중모드 사각 루프 공진기를 이용하여 설계하는 방법을 제안하였다. 사각패치 형태인 한 개의 perturbation element와 세 개의 reference element의 크기를 조절하여 2.4 GHz와 5.8 GHz의 두 주파수 대역에서 만족하는 이중 대역통과 필터를 설계하였으며, 나아가서 개방 스터브를 적용시켜 서지대역을 조절하여 2.4 GHz와 5.2 GHz의 두 주파수 대역에서 만족하는 새로운 형태의 이중 대역통과 필터를 설계하는 방법을 제안하였다. 제작된 이중 대역통과 필터의 설계 결과와 측정 결과가 거의 일치하였으며, 따라서 본 논문이 제안한 설계 방법이 타당함을 확인하였다.

• Steel and Composite Structures
• /
• 제42권1호
• /
• pp.91-106
• /
• 2022

Concrete-filled square stainless steel tubes (CFSSST), which possess relatively large flexural stiffness, high corrosion resistance and require simple joint configurations and low maintenance cost, have a great potential in constructional applications. Despite that the use of stainless steel may result in high initial cost compared to their conventional carbon steel counterparts, the whole-life cost of CFSSST is however considered to be lower, which offers a competitive choice in engineering practice. In this paper, a comprehensive experimental and numerical program on 24 CFSSST stub column specimens, including 3 austenitic and 3 duplex stainless steel square hollow section (SHS) stub columns and 9 austenitic and 9 duplex CFSSST stub columns, has been carried out. Finite element (FE) models were developed to be used in parametric analysis to investigate the influence of the tube thickness and concrete strength on the ultimate capacities more accurately. Comparisons of the experimental and numerical results with the predictions made by design guides ACI 318, ANSI/AISC 360, Eurocode 4 and GB 50936 have been performed. It was found that these design methods generally give conservative predictions to the ultimate capacities of CFSSST stub columns. Improved calculation methods, developed based on the Continuous Strength Method, have been proposed to provide more accurate estimations of the ultimate resistances of CFSSST stub columns. The suitability of these proposals has been validated by comparison with the test results, where a good agreement between the predictions and the test results have been achieved.

• 한국강구조학회 논문집
• /
• 제16권1호통권68호
• /
• pp.33-42
• /
• 2004

SN 강재를 건축구조용으로 사용하기 위해서는 설계기준강도가 제정되어야 한다. 선행 연구로써, SN400B/490B 후판재로 재판한 SN400B/490B 원형강관과 SPAP235/325 및 SPAR295 각형강관의 물성을 평가하였다. SN400B/490B 후판재와 비교했을 때 STKN400B/490B 원형강관의 항복인장 및 인장강도는 상승하였지만, 제조 프로세스에 무관하게 STKN400B/490B 원형강관의 규격을 만족 하였다. 그러나 SPAP235/325 각형강관 모서리부에서의 항복인장 및 인장강도는 규격을 벗어났다. 이것은 SPAP235/325 각형강관 규격에서 정하고 있는 값이 모서리부에서의 값이 아니라 변에서의 값이기 때문이다. STKN490B 원형강관에 발생한 최대 인장잔류응력은 모재 항복강도 수준이며, 최대 압축잔류응력은 모재 항복강도의 40% 수준이었다. 또한 SPAP325 각형강관에 발생한 최대 인장잔류응력과 최대 압축잔류응력은 모두 모재 항복강도의 80% 수준이었다. 중심압축실험을 한 결과 STKN490B 원형강관의 좌굴강도는 제조 프로세스에 관계없이 별 차이를 보이지 않았다. 그러나 각형강관의 경우는 SPAP325 각형강관이 SN490B로 built-up한 각형강관보다 좌굴강도가 높게 나타났다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2120-2125
• /
• 2005

The principal idea of vibration isolation is to filter out the response of the system over the corner frequency. The isolation objectives are to transmit the attitude control torque within the bandwidth of the attitude control system and to filter all the high frequency components coming from vibration equipment above the bandwidth. However, when a reaction wheels or control momentum gyros control spacecraft attitude, vibration inevitably occurs and degrades the performance of sensitive devices. Therefore, vibration should be controlled or isolated for missions such as Earth observing, broadcasting and telecommunication between antenna and ground stations. For space applications, technicians designing controller have to consider a periodic vibration and disturbance to ensure system performance and robustness completing various missions. In general, past research isolating vibration commonly used 6 degree order freedom isolators such as Stewart and Mallock platforms. In this study, the vibration isolation device has 3 degree order freedom, one translational and two rotational motions. The origin of the coordinate is located at the center-of-gravity of the upper plane. In this paper, adaptive notch filter finds the disturbance frequency and the reference signal in filtered-x least mean square is generated by the notch frequency. The design parameters of the notch filter are updated continuously using recursive least square algorithm. Therefore, the adaptive filtered-x least mean square algorithm is applied to the vibration suppressing experiment without reference sensor. This paper shows the experimental results of an active vibration control using an adaptive filtered-x least mean squares algorithm.

• 한국통신학회논문지
• /
• 제18권11호
• /
• pp.1714-1725
• /
• 1993

본 논문에서는 스칼라 인수 a1, a2, a3를 매개변수화하여 갱신항을 첨가한 비선형 적응 알고리즘의 특성을 해석하고 그 구조를 나타낸다. 수렴 특성의 해석에서 평균 필터계수 벡터에 대하여 전이행열의 값이 기술된다. 그 알고리즘이 안정하기 위한 범위도 증명된다. 또한 본 알고리즘의 시정수도 유도되고, Sign 알고리즘, 기존의 LMS 알고리즘, LFG 알고리즘, QFG 알고리즘의 계산량도 비교해 본다. 평균자승의 수렴특성을 해석하고 평균자승 순환식과 초과 평균자승 오차(excess mean square error) 표현식을 유도하고 본 알고리즘이 안정하기 위한 조선도 정한다. 컴퓨터 모의실험(simulation)에서 CFG 알고리즘이 LMS, LFG 및 QFG 알고리즘보다 계산량이 증가하는 반면 수렴속도에서 현저한 향상을 보여준다.

• 한국전기전자재료학회논문지
• /
• 제24권9호
• /
• pp.733-738
• /
• 2011

A novel design of a simple square-frame USM (ultrasonic motor) was proposed. The stator of the motor consists of a square-frame shape elastic body and four rectangular plate ceramics. The four ceramics were attached to inner surfaces of the square frame elastic body. The same phase voltages were applied to the ceramics on horizontal surfaces, and 90 degree phase difference voltage were applied to the ceramics on vertical surfaces. To find a model that generates elliptical motion at outside of the stator, the finite element analysis program ATILA was used. The analyzed results were compared to the experimental results. As result, the model EL10EH3ET0.5CL4 which generates the maximum elliptical displacement was chosen by analyzing the resonance mode according to changes in frequency.

• Steel and Composite Structures
• /
• 제31권2호
• /
• pp.173-185
• /
• 2019

This paper presents experimental and numerical investigations of aluminum tubular members subjected to combined bending and web crippling. A series of tests was performed on square hollow sections (SHS) fabricated by extrusion using 6061-T6 heat-treated aluminum alloy. Different specimen lengths were tested to obtain the interaction relationship between moment and concentrated load. The non-linear finite element models were developed and verified against the experimental results obtained in this study and test data from existing literature for aluminum tubular sections subjected to pure bending, pure web crippling, and combined bending and web crippling. Geometric and material non-linearities were included in the finite element models. The finite element models closely predicted the strengths and failure modes of the tested specimens. Hence, the models were used for an extensive parametric study of cross-section geometries, and the web slenderness values ranged from 6.0 to 86.2. The combined bending and web crippling test results and strengths predicted from the finite element analysis were compared with the design strengths obtained using the current American Specification, Australian/New Zealand Standard and European Code for aluminum structures. The findings suggest that the current specifications are either quite conservative or unconservative for aluminum square hollow sections subjected to combined bending and web crippling. Hence, a bending and web crippling interaction equation for aluminum square hollow section specimens is proposed in this paper.

• 대한전자공학회논문지TC
• /
• 제42권11호
• /
• pp.107-115
• /
• 2005

본 논문에서는 광대역에서 동작하는 대역폭 조절 패치를 갖는 CPW 급전 사각 슬롯 안테나를 제시하였다. 안테나 설계 방법으로서 구조적 변수인 사각 슬롯의 가로폭 및 세로폭을 이용하여 반파장 다이폴 안테나 특성을 보이는 낮은 공진 주파수와 높은 공진 주파수 영역을 설정하였고, 대역폭 조절 패치를 이용한 $50{\Omega}$ 임피던스 정합 조절 과정을 통하여 $20GHz\~33GHz$ 영역에서 동작하는 $50\%$ VSWR=2 임피던스 대역폭을 지닌 안테나 구조를 제시하였다. 안테나 사각 슬롯의 가로폭을 4.6mm로, 세로폭을 3.5mm로, 비율이 $70\%$정도인 안테나 구조에서 중간 주파수 26GHz, 대역폭 $20GHz\~33GHz$의 측정 결과를 나타냈다. 이 결과는 의료용 안테나가 대역폭 조절 패치를 이용할 때 단순한 사각 슬롯 안테나의 구조로 구현됨을 보여 주었다

• 한국의류산업학회지
• /
• 제6권1호
• /
• pp.17-22
• /
• 2004

The purpose of this study was to obtain the basic element of patterns, which is the motif, from the existing art works and use it to create and simulate a variety of patterns to show the practical use of the computer. Natural dyed works of geometric shapes like squares and 1/4 of circles, each dyed with a different natural dyes, were produced and motifs were extracted. Then using the 4D box in Adobe Photoshop v.6.0, the developing pattern change and simulation effects when using different patterns and different repetition settings were examined. Observations were made as the motifs were replicated. Different patterns like a diagonal line, a square and a circle appeared. In order to find out the effects according to the changes, the motifs from work's square portions, circle centre, and the composition of eight motifs were extracted and used. The repeated patterns according to the extracted motifs simply showed that in the case of just repeating and arranging, square patterns appeared. By replicating and arranging, the motif and the allophone were matched and patterns with regular lines were formed, like a twill, pointed twill line. By setting the direction to Y and X in the repetition methodes, a typical half-drop arrangement or a brick pattern arrangement were formed according to 1/4, 2/4, 3/4, 1/3, or 2/3 in changes. Also the steepness of the slope changes quickly or in turn slowly as the rhombus shape appears. However in the case of a composed motif, an ogee pattern appeared. Lastly, by 3-D mapping patterns like a slant line, pointed twill patterns, diamond patterns, and the repeat patterns of a motif with a circle and a line combined, and a circle motif, an optical illusion could be observed.

• Journal of the Korean Data and Information Science Society
• /
• 제20권2호
• /
• pp.401-410
• /
• 2009

두 블럭인자와 하나의 주인자로 구성된 3 ${\times}$ 3 라틴방격모형의 특성으로 인하여 주효과를 검정하기 위한 순위변환 통계량의 검정력은 모집단의 분포유형에 상관없이 모수적 통계량의 검정력보다 전반적으로 월등히 높은 수준이다. 특히 세인자가 모두 고정인 경우, 하나의 블럭인자만이 랜덤인 경우, 두 블럭인자가 모두 랜덤인 경우의 순서로 주효과를 검정하기 위한 순위변환 통계량의 검정력이 모수적 통계량의 검정력에 비하여 상대적으로 높다. 또한 검정하고자 하는 주효과의 크기가 크되 동시에 동일크기의 하나의 블럭효과 및 또다른 블럭효과 크기는 상대적으로 작을수록 주효과를 검정하기 위한 순위변환 통계량의 검정력은 모수적 통계량의 검정력보다 상대적 우위성을 갖는다.