• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.178-184
• /
• 2001

Transparent and highly oriented KLN thin films have been grown by an rf- magnetron sputtering deposition method. A homogeneous and stable KLN target was prepared by calcine and sintering process. For KLN target, stoichiometry and composition excess with K of 30% and 60%, and Li of 15% and 30% respectively, was prepared. The targets were sintered at low temperature to prevent vaporization of K and Li. KLN thin films were fabricated by rf-magnetron sputtering method using those targets. In this experiment, using the target of composition excessed with K of 60% and Li of 30%, single phase KLN thin film was produced. KLN thin film has excellent crystallinity and highly c-axis oriented on Corning 1737 substrate. Transmittance of thin film in visible range was 90%, absorption edge is 333 nm and refractive index at 632.8 nm was 1.93.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1919-1921
• /
• 1999

AlN thin films were fabricated by sputter for the application of MIS device with Al/AlN/Si structure. We controled that sub-temperature room-temperature. Sputtering pressure 5 mTorr, flow ratio Ar:$N_2$=1:1(4sccm:4sccm), and appended hydrogen gas $0{\sim}5%$. AlN thin films thickness fabricated to maintain $2700{\AA}$ time control. Before the experiment remove to the contaminated material use the Ultrasonic every 10 minute use the acetone and ethanol, then use the HF remove oxide-substance at 10 second. To analyze characteristic of the $H_2$ gas addition period, C-V and I-V characteristic make and experiment $H_2$ gas at addition period progressive capability of I-V and C-V characteristic.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.60-63
• /
• 2000

We have investigated the relationship between electrical and morphological properties of titanium silicide films. In this study, the C54 titanium silicides were formed by using high temperature sputtering and one-step annealing. From the measurement of electrical and morphological properties, a smooth surface and a relaxed roughness were observed for the titanium silicide film fabricated by high temperature sputtering. And it seems that the previous effect could improve electrical properties.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.169-169
• /
• 2016

In this paper, we report electrical, optical and structural properties of Al-doped zinc oxide (AZO) thin films deposited at different substrate temperatures and pressures. The films were prepared by radio frequency (RF) magnetron sputtering on glass substrates in argon (Ar) ambient. The X-ray diffraction analysis showed that the AZO films deposited at room temperature (RT) and 20 Pa were mostly oriented along a-axis with preferred orientation along (100) direction. There was an improvement in resistivity ($3.7{\times}10^{-3}{\Omega}-cm$) transmittance (95%) at constant substrate temperature (RT) and working pressure (20 Pa) using the Hall-effect measurement system and UV-vis spectroscopy, respectively. Our results have promising applications in low-cost transparent electronics, such as the thin-film solar cells and thin-film transistors due to favourable deposition conditions. Furthermore our film deposition method offers a procedure for preparing highly oriented (100) AZO films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.319-320
• /
• 2009

In this study, high-quality Al-N doped p-type ZnO thin films were deposited on n-type Si (100) wafer or Si coated with buffer layer by DC magnetron sputtering in the mixture of $N_2$ and $O_2$ gas. The target was ceramic ZnO mixed with $Al_2O_3$ (2 wt%). The p-type ZnO thin film showed higher carrier concentration $2.93\times10^{17}cm^{-3}$, lower resistivity of $5.349\;{\Omega}cm$ and mobility of $3.99\;cm^2V^{-1}S^{-1}$, respectively. According to PL spectrum, the Al donor energy level depth ($E_d$) of Al-N codoped p-type ZnO film was reduced to about 51 meV, and the N acceptor energy level depth ($E_a$) was reduced to 63 meV, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.7
• /
• pp.624-630
• /
• 2006

ZnO deposition parameters are not independent and have a nonlinear and complex property. To propose a method that could verify and predict the relations of process variables, neural network was used. At first, ZnO thin films were deposited by using RF magnetron sputtering process with various conditions. Si, GaAs, and Glass were used as substrates. The temperature, work pressure, and RF power of the substrate were $50\sim500^{\circ}C$, 15 mTorr, and $180\sim210W$, respectively : the purity of the target was ZnO 4 N. Structural properties of ZnO thin films were estimated by using XRD (0002) peak intensity. The structure of neural network was a form of 4-7-1 that have one hidden layer. In training a network, learning rate and momentum were selected as 0.2, 0.6 respectively. A backpropagation neural network were performed with XRD (0002) peak data. After training a network, the temperature of substrate was evaluated as the most important parameter by sensitivity analysis and response surface. As a result, neural network could capture nonlinear and complex relationships between process parameters and predict structural properties of ZnO thin films with a limited set of experiments.

• Journal of the Korean Ceramic Society
• /
• v.32 no.3
• /
• pp.313-320
• /
• 1995

We investigated the preferred orientation, electrical and magnetic properties of the Mn-Zn ferrite thin films deposited on SiO2/Si(100) by ion beam sputtering. The Cu-added Mn-Zn ferrite thin films had a preferred orientation of (111) with a weak orientation, (311). While the Zn-added one had a strong (111) preferred orientation. The saturation magnetization of the Cu- or Zn-doped Mn-Zn ferrite films increased with increasing substrate temperature (Ts) due to the increase of grain size and the enhancement of crystallinity. For the same reason the coercivity of Cu- or Zn-doped Mn-Zn ferrite films deposited at low Ts increased with increasing Ts, but those of the films deposited at high Ts slightly decreased not only because the defect density of the films decreases but because more grains have multi-domains with increasing Ts. The resistivity of Cu- or Zn-added Mn-Zn ferrite thin fims measured by complex impedance method decreased with increasing Ts due to the ehhancement of crystallinity as well as due to the increase of grain size.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.4
• /
• pp.165-168
• /
• 2008

Ta-doped thin films were deposited on quartz and indium-tin oxide glass substrates using a co-sputtering method. The Ta-doped films formed a solid solution that induced structural changes from rutile to anatase phase. The anodic photocurrents of the Ta-doped $TiO_2$ electrodes were observed not only in UV but also in the visible light range. The photocurrent response in visible light on Ta-doped $TiO_2$ films are due to bandgap reduction.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.7
• /
• pp.660-664
• /
• 2008

Titanium nitride (TiN) thin films are widely used for hard coatings due to their superior hardness, chemical stability, low friction and good adhesion properties. In this study, we investigated the effect of DC power on the characteristics of TiN thin films deposited on Si and glass substrates by DC magnetron sputtering using TiN target. We made TiN films of 300 nm thickness with various DC powers. The structural properties of films are investigated by x-ray diffractions (XRD) and tribological properties are measured by nano-indentation, nano-scratch tester. The rms roughness was measured by atomic forced microscopy (AFM). In the result, TiN films had the smooth surface and exhibited (111) directions with the increase of DC Power. Also, especially in case of 175 W DC power, TiN film exhibited the maximum hardness about 8 GPa, and the critical load near 25.

• Journal of the Korean Vacuum Society
• /
• v.7 no.3
• /
• pp.201-207
• /
• 1998

We have investigated about interface characteristics between ZnO thin films and metal electrodes when ZnO and metal electrodes were fabricated as piezoelectric vibrators. At this, ZnO thin films were deposited by rf reactive magnetron sputtering method. After fabricating piezoelectric vibrator of Cr/ZnO/Cr structure with optimum condition, we analyse interface characteristics between ZnO thin films and metal electrodes by I-V measurement. AES depth profile, SEM and C-V measurement. From these measurements we found that ZnO piezoelectric vibrators showed good property when they fabricated as Cr/$SiO_2$/ZnO/Cr structure. And we could confirm these things by driving, and measuring vibration displacement of piezoelectric vibrator with $SiO_2$diffusion barrier.