• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.218-219
• /
• 2009

$TiO_2$ thin films were deposited on si wafer and glass substrates by rf magnetron sputtering. The films were coated under argon atmosphere at different working pressures: 3mTorr, 5mTorr, 7mTorr, 10mTorr. The films were annealed at $550^{\circ}C$ for 5h after deposition. Film structures were analyzed with XRD, As the increase of working pressure, $TiO_2$ films have been good crystallinity. At 3mTorr and 5mTorr, the films were observed in rutile phase and anatase phase.

• Electrical & Electronic Materials
• /
• v.9 no.2
• /
• pp.196-203
• /
• 1996

The highly c-axis oriented zinc oxide thin films were deposited on Sapphire(0001) substrates by reactive RF magnetron sputtering. The characteristics of zinc oxide thin films on RF power, substrate-target distance, and substrate temperature were investigated by XRD, SEM and EDX analyses. The physical characteristics of zinc oxide thin films changed with various deposition conditions. The higher substrate temperatures were, The better crystallinity of zinc oxide thin films. The highly c-axis oriented zinc oxide thin films were obtained at sputter pressure 5mTorr, rf power 200W, substrate temperature 350.deg. C, substrate-target distance 5.5cm. In these conditions, the resistivity of zinc oxide thin films deposited on pt/sapphire was 12.196*10$^{9}$ [.ohm.cm].

• Journal of the Korean institute of surface engineering
• /
• v.35 no.3
• /
• pp.121-126
• /
• 2002

WC/C multilayered films were deposited by arc ion plating and magnetron sputter hybrid system with various $C_2$H$_2$ flow rates and bias voltages. The coatings have been characterized with respect to their chemical composition (Glow Discharge Optical Emission Spectroscopy), hardness(Knoop micro-hardness), residual stress(Laser beam bending) and friction coefficient(Ball on disc type wear test). Deposition rate, microhardness and residual stress of WC/C films were observed to increase with increasing the $C_2$$H_2$ flow rates. The highest hardness and residual stress were measured to be 26.5 GPa and 1.1GPa for, WC/C film deposited at substrate bias of -100V. WC/C multilayered film was obtained very low friction coefficient(~0.1).

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.171-172
• /
• 2013

종래의 흑연 위주 연료전지 분리판 개발되어 최근 고분자 전해질 막 연료전지가 높은 전력, 낮은 배기 가스 배출, 낮은 작동 온도로 자동차 산업에서 상당한 주목을 받고 있다. 요구사항은 높은 전기 전도도, 높은 내식성, 낮은 가스 투과성, 낮은 무게, 쉬운 가공, 낮은 제조비용이다. Thin film Cr 장비로 저항가열 furnace, sputter 등이 사용된다. 연료전지 분리판의 고전도도, 내부식성 보호막의 고속 증착을 위한 새로운 증착원으로 스퍼터 - 승화형 소스의 가능성을 유도 결합 플라즈마에 금속 봉을 직류 바이어스 함으로써 시도하였다. 유도 결합 플라즈마를 이용하여 승화증착 시스템을 사용하여 OES(SQ-2000)와 QMS (CPM-300)를 사용하여 $N_2$ flow에 따른 유도 결합 플라즈마를 이용한 스퍼터-승화 증착 시스템을 사용하여도 균일한 공정을 하는 것을 확인 하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.419-421
• /
• 2008

Sputter deposition on a Pt counter electrode was studied using RF plasma as the improvement of conversion efficiency for dye-sensitized solar cells (DSC). The effects of the sputtering thickness and incident angle on a Pt counter electrode for DSC was scrutinized. We conducted the experiment to get the optimal sputtering time for the performance of the DSC. Under the sputtering time condition of 120 seconds, we varied the incident angles of substrate from $0^{\circ}$ to $60^{\circ}$. Under standard test condition (AM 1.5, 100mW/$cm^2$), we obtained the maximum efficiency of 4.61% at the incident angle of $40^{\circ}$ with an active cell area of $1cm^2$.

• Journal of the Korean Vacuum Society
• /
• v.2 no.4
• /
• pp.474-479
• /
• 1993

Submicron contact hole filling with aluminum alloys has been achieved with a multistep metallization method, which utilizes a metal " flow" or self-diffusion process at elevated temperatures after the metal was sputter-deposited. A multi-chamber, modular sputtering system was employed to deposit aluminum alloys and subsequently to anneal the deposited metal films under vacuum at high temperatures. The film were deposited on 200 mm wafers with planar, dc magnetron sputtering sources without anysubstrate bias. The basic process steps studied for the multistep metallization include an initial layer deposition at low temperatures less than $100^{\circ}C$, and an annealin gstep at elevated temperatures, between 450 and $550^{\circ}C$. The degree of planarization or step coverage was dependent strongly upon the temperature and time of the flow step and complete filling of the submicron contacts with aluminum alloys was achieved. Responsible mechanisms for the enhancement in step coverge and factros determining uniform and reproducible flow of aluminum alloys during the high temperauture step are discussed.discussed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.4
• /
• pp.321-324
• /
• 2013

In this study, The RF magnetron sputter and evaporator was on glass substrates 30 mm ${\times}$ 30 mm OMO multilayer thin film structure is applied to the low-e. Structural and optical properties, a thin film was produced, the variable was placed into a variable deposition time of the oxide layer. According to the XRD measurement results there is no peak that satisfies the Bragg's law ($2dsin{\theta}=n{\lambda}$) which confirmed that it is an amorphous structure. RMS value of the results of the AFM measurement, has a roughness of less than 2 nm. transmittance measurements results, visible light region an average 80%, IR region 40% showed.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.4
• /
• pp.532-536
• /
• 2007

Carbon nanotube (CNT) properties, produced using a magnetic null discharge (MND) plasma production technology, were investigated. We firstly deposited the Fe layer 200 nm in thickness on Si substrate by the magnetic null discharge sputter method at the substrate temperature of $300도C$, and then prepared CNTs on the catalyst layer by using the magnetic null discharge (MND) based CVD method. CNTs were deposited in a gas mixture of CH4 and N2 at a total pressure of 1 Torr by the MND-CVD method. The substrate temperature and the RF power were $650^{\circ}C$ and 600W, respectively. The characterization data indicated that the proposed source could synthesize CNTs even under relatively severe conditions for the magnetic null discharge formation.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3B
• /
• pp.276-282
• /
• 1999

For the quantitative surface analysis of multicomponent materials, algorithms for the compensation of the matrix effect and surface compositional change by ion beam sputtering must be established and reference materials having certified compositions are necessary. These certified reference material (CRM)s are needed for the improvement of instrument performance, inter-laboratory comparison and quantitative surface analysis. Surface analysis group of KRISS developed alloy thin film CRMs by and ion beam sputter deposition system and in-situ surface analysis system to control the composition of alloy thin films The real compositions of the CRMs were certified by inductively coupled plasma-atomic emission spectroscopy (ICP-AES).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1622-1624
• /
• 2007

In order to realize effective p-type doping in ZnO thin films, ZnO films were deposited on P-doped Silayers by RF-magnetron sputter deposition technique and annealed at various temperatures. The result indicated that ZnO film annealed at $700^{\circ}C$ showed p-type conduction with a high carrier concentration in the order of $10^{19}\;cm^{-3}$.