• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.7
• /
• pp.669-674
• /
• 2011

In this paper, a method for reduction of spurious signal in Digital RF Memory(DRFM) is proposed. Spurious response is a major performance issue of DRFM. This method is based on mixing a random phase LO signal into input IF signal and sampling it. The random phase LO signal is generated by high speed phase shifting characteristic of Direct Digital Synthesizer(DDS). Through this technique, we achieved an enhancement of 5~10 dB of spurious response.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.239-245
• /
• 2016

Deramping technique has been widely used to acquire high resolution SAR(Synthetic Aperture Radar) images for the advantage of the data size and the processing time. However, unwanted spurious signals caused by SAR hardware can be leaked in the process of converting into a digital signal through the ADC(Analog-Digital Converter) and added in a echo signal. These tones make image quality degrade significantly. In order to solve this problem, the unwanted tones need to be detected by analysing the characteristic of the noise tone and then effectively removed from raw data. In this paper, we propose a method for efficiently removing noise tone on the raw data based on the characteristic of spurious signals.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.1
• /
• pp.140-146
• /
• 2010

The multi-function radar can detect and track the low RCS targets. For this purpose the multi-function radar uses the pulse train waveform. because this waveform has high dynamic range and good SNR(Signal to Noise Ratio). But the spurious signals can also be detected by processing the pulse train waveform. Thus the multi-function radar signal processor must have the high SFDR(Spurious Free Dynamic Range). This paper describes the development of the multi-function radar signal processor having the high SFDR.

• Journal of Convergence for Information Technology
• /
• v.9 no.8
• /
• pp.134-139
• /
• 2019

This paper describes the effect of multiple signal regeneration in quadrature digital radio frequency memory(DRFM). Single channel DRFM have good reproducibility after storing a single signal. However, when reproduced after storing multiple signals, the spurious signal is large. The quadrature DRFM consists of I and Q channels, which can greatly reduce the spurious signal. The amplitude of the spurious signal depends on the number of bits of data stored in the DRFM. In this paper, we have obtained the number of bits of signal regeneration according to the application of radio frequency memory by obtaining the size of the spurious signal according to the number of bits of the stored data of the DRFM for multiple signals. As a result of this study, 4 bits quadrature DRFM can achieve a spurious output of less than -20dB, which is used for 4 signals. Those are expected to greatly contribute to the signal analysis of electronic warfare equipment and the development of jamming device.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8C
• /
• pp.529-535
• /
• 2011

After permission for utilization of TV white space by FCC, a lot of attentions are focused on spectrum sensing, and various spectrum sensing methods have been proposed. However, they do not consider real environment, thus they are hard to achieve the required performance. In this paper, we propose resolutions for the problem which could be occurred in implementation of spectrum sensing module and verify performance of the proposed methods with computer simulation. The first proposed method utilizes channel status information to separate received signal and spurious for reducing false alarm probability caused by system internal spurious. The another proposed scheme is subband normalization method to prevent miss detection caused by multiple narrow band signals with different received signal strength. The simulation results verify that we can prevent false alarm cause by spurious components with the proposed system internal spurious cognition. Moreover, the proposed subband normalization method shows that it could overcome performance degradation caused by received signal strength difference.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.661-668
• /
• 2004

A novel method to reject the spurious signals which are occurred at Weaver-type low-IF transmitter was proposed in this paper. The spurious signals are generated by the gain and phase imbalances of I/Q channel or imperfect characteristics of 90$^{\circ}$ phase shifter in local oscillator for I/Q channel source. By deriving the gain and phase-based functions from RF spurious signal with the channel imbalance information, the lie channel imbalances were deduced as functions with magnitude and sign dependent on I/Q channel imbalance degree. The proposed method compensates the estimated I/Q channel imbalances by correlation values between the down-converted signal obtained by squaring the output signal itself using a simple mixer and the modified baseband signal. By comparing two signals after A/D conversion, the magnitude and sign of each type of imbalances can be determined separately and simultaneously. Based on the I/Q channel imbalance compensation, the spurious signals can be reduced by adjusting the gain and phase values of I or Q channel signal. The way to estimate the channel imbalances of the up-conversion mixer was presented and verified by using theoretical derivations and computer simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.8
• /
• pp.1213-1221
• /
• 2022

In Electronic Warfare, the need to develop a jamming system that protects our location information from enemy radar is constantly increasing. The jamming system normally uses wide-band DRFM(Digital Radio Frequency Memory) that processes the entire bandwidth at once. However, it is difficult to jam if there is a CW(Continuous Wave) interference signal in the band. Recently, instead of wide-band signal processing, a structure using a filter bank that divides the entire band into several sub-bands and processes each sub-band independently has been proposed. Although it is possible to handle interference signal through the filter bank structure, spurious signal occurs when the signal is received at a boundary frequency between sub-bands. Spurious signal makes a output power of jamming signal distributed, resulting in lower JSR(Jamming to Signal Ratio) and less jamming effect. This paper proposes an over-sampled channelized DRFM structure that enables interference response and prevents spurious signal for sub-band boundary frequency input.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.12
• /
• pp.1243-1250
• /
• 2014

In this paper, a wideband DDS module covering the frequency range from 0.5 to 1.1 GHz was designed and fabricated. The clock frequency of the DDS was selected 2.4 GHz in order for 600 MHz output bandwidth. Multiple spurious cancelling signals having same amplitude and $180^{\circ}$ phase difference compared to the spurious were created at the additional path and added to the output signal within DDS for the spurious performance improvement. The fabricated DDS module showed better spurious performance than the commercial DDS one more than 10 dB and frequency tuning time was 340 ns below.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.775-784
• /
• 2010

In this paper we propose a design method of X band frequency hopping synthesizer in terms of phase noise and settling time with DDS driven PLL architecture, which has the advantages of high frequency resolution, fast settling time and small size. In addition, a noble method is proposed to remove the synthesizer output spurious signals due to superposition effect of DDS. The spurious signal which depend on its normalized frequency of DDS, can be dominant if they occur within the PLL loop bandwidth. We verify that the sources of that spurious signals are quasi-amplitude modulation and superposition effect, and suggest that such signals can be eliminated by intentionally creating frequency errors in the developed synthesizer.

• Journal of electromagnetic engineering and science
• /
• v.5 no.4
• /
• pp.193-196
• /
• 2005

The DC power-bus for the PCB is loaded with metal walls on its selected sides and is characterized electromagnetically. This is a novel concept of approach to mitigate the spurious resonance and finally signal integrity problems. In particular, the peak at DC, which is always in the way to secure parallel-plates' EMC, can be completely removed by the proposed method. Through the findings of this study, the effect of metal-loading of the power-bus will be presented along with the impression that the suggested technique can tackle the headaches of signal integrity, ground bounce, EMIs.