• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.108-111
• /
• 2002

It is important to predict forming procedure for minimizing trial-and-error in the application of cold forging of gears. In this study, 3-dimensional simulations of cold forging processes of spur and bevel gear were carried out using finite element method to investigate the characteristics of the processes. From the simulation result it was found that incomplete teeth forming of spur gear was occurred with increase of teeth number in forging by forward extrusion. It can be reduced through division of material flows at the initial forming state using forward/backward combined extrusion.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.499-502
• /
• 2014

This paper presents a comparison study between simulation and experiment for fault diagnostics of a spur gear. In simulation, fault diagnostics using transmission error (TE) was performed and concluded to be valid. In a real experiment, however, it is not as easy to detect faults of gears using TE as in simulation. In this paper, after seeding the various faults like tooth crack of different length, tooth breakage and spalling in test rig, TE was calculated. Then, several signal processing techniques were performed to overcome the limitations of an experiment in detecting the fault signals of TE. After signal processing, we could detect the various faults of spur gears and different amplitude of TE sparks from cracks of different length. Then we discussed the difference between simulation and experment.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.1413-1417
• /
• 2004

수제는 하천 흐름을 적극적으로 제어하여 수심을 유지하고, 소류력을 증가시키는 한편 수세를 줄여 토사의 침전을 유포하고자 하는 하천 시설물이다. 수제에 의한 역흐름장(diverse flow fields) 혹은 수제역 (spur-dike zone)의 형성은 다양한 수중생물의 서식환경을 조성하거나 홍수 시 어류의 피난처로 사용될 수 있기 때문에 최근 중시되고 있는 자연형 하천 공법에 수제가 도입되고 있다. 따라서 본 연구에서는 3차원 수치모형을 이용하여 수제주변 흐름을 수치모의 하여 Rajaratnam과 Nwachukwu (1983)의 수리실험 자료 및 Tingsanchali와 Maheswaran (1990)의 2차원 수치모의 결과와 비교하였다. 수치모의 결과 이차흐름과 역방향 흐름이 크게 나타나는 수제 안쪽 및 제방과 가까운 지점에서는 수치모의 자료와 실험자료가 잘 일치하지 않는 결과를 보였으면, 이러한 지점을 제외한 다른 지점에서는 실험자료와 유사한 결과를 나타내고 있음을 확인하였다. 단일 수제에 의한 재순환영역 (recirculation zone)은 수제길이의 약 10배 지점인 것으로 나타났으며, 이는 기존의 연구결과와 유사하였다. 또한 수제 뒤편에 형성되는 와의 중심이 수면에 가까운 지점일수록 뒤로 이동하는 것을 확인하였다. 이는 Tominaga 등 (2001)의 실험결과와 유사한 것으로서 수심에 비례하여 수제 뒷부분에 형성되는 와의 크기가 커지는 것을 파악하였다.

• 열처리공학회지
• /
• 제2권2호
• /
• pp.11-16
• /
• 1989

Understanding and control of thermal history of heat-treated components are very important in heat treating process. A computer program was developed for prediction of thermal history in quenching process with various cooling media and agitation conditions. Computer simulation of heat flow in quenching treatment of spur gear of SCM 22 H was carried out by two and three dimensional finite difference method. Distributions of microstructure and hardness in heat-treated spur gear were predicted by computer simulation, and the results showed a good agreement with the experiments. It was concluded that the

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.928-935
• /
• 2018

In this paper, a compact fully printable bandpass filter is suggested for a low-frequency channel 3.2 GHz ~ 3.7 GHz in the Ultra-Wideband (UWB) communication system. It is featured with a small geometry of $0.5{\lambda}_g/15$ and a low insertion loss despite using FR4 as a cheap substrate of a high dielectric loss. This is made possible by generating zeroth-order-resonance (ZOR) from one cell comprising two series resonances obviously separated from one shunt resonance as a third-order bandpass filter. Especially, the series resonance elements are combined with spur-lines bent by 90 degrees, which makes the port-impedance matched well and eliminates spurious hikes in the stopband, while the overall size remains almost unchanged. The design is carried out by setting up the equivalent circuit and the circuit simulation is checked by the full-wave EM analysis. The structure is manufactured and measured to show that the circuit modeling and EM simulation results agree with the measured data.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.778-779
• /
• 2006

Manufacturing technologies of micro parts were studied in nano grained Al-1.5mass%Mg alloy. During compressive test at $300^{\circ}C$, the Al alloy showed stain softening phenomenon by grain boundary sliding regardless of strain rate. Micro spur gear with ten teeth (height of $200{\mu}m$ and pitch of $250{\mu}m$) was fabricated with sound shape by micro forging. During micro forging, increase of applied stress induced by friction between material and die surface was effectively compensated by decrease of stress by strain softening behavior and as a result, flow stress increased only about 50 MPa more than that in compressive test

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.722-727
• /
• 2004

The gear that is used in various mechanical components occurs easily damages due to the repeated torque and the high oil temperature. The main failure mode of the gear is the surface deterioration with the tooth surface fatigue. Therefore, the life evaluation and the failure analysis of the gear were very important since it may cause fatal damage of entire gear box system. In this paper, the failure mechanism and the life of the gear were evaluated using the durability analysis simulator such as MSC.FATIGUE. Moreover, the reliability analysis model of the spur gear with the accelerated life testing technique was proposed.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.465-470
• /
• 2010

The charge pump in a phase-locked loop is a key block in determining reference spurs of the VCO output signal. To reduce reference spurs, the current mismatch in the charge pump must be minimized. This paper presents a dual compensation method to reduce the current mismatch. The proposed charge pump and PLL were realized in a $0.18{\mu}m$ CMOS process. Measured current matching characteristics were achieved with less than 1.4% difference and with the current variation of 3.8% in the pump current over the charge pump output voltage range of 0.35-1.35V at 1.8V. The reference spur of the PLL based on the proposed charge pump was measured to be -71dBc.

• 한국공작기계학회논문집
• /
• 제12권5호
• /
• pp.24-33
• /
• 2003

This study proposed a technique for inverse problem, linear approximation of contact position and loading in single and double meshing of transmission contact element using 2-dimension model considered near the tooth by root stress. Determination of root stress is carried out far the gear tooth by finite element method and boundary element method. Boundary element discretization near contact point is carefully performed to keep high computational accuracy. The predicted results of boundary element method are good accordance with that of finite element method.

• 식물분류학회지
• /
• 제40권3호
• /
• pp.183-185
• /
• 2010

전라남도 신안군 흑산면에서 한반도 미기록종인 다도새우난초(Calanthe ${\times}$ kibanakirishima F. Maek.)를 발견하여 보고한다. 다도새우난초는 신안새우난초와 비슷하지만 화색이 다르고, 거가 짧고 더 굵다는 점에서 다르다. 국내의 다른 새우난초속 종들과는 잎의 뒷면에 털이 있고 거가 발달한다는 점에서 쉽게 구별된다.