• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.134-140
• /
• 2003

The film sensor is used for measuring pressure distribution at planar area, especially at a small space or gap. The present paper deals with the development of film type sensors and system for pressure distribution measuring. The developed system is consist of (1)film sensor with 40/sup */40 array, (2)PCI interface card with maximum sampling rate of 100㎐, and (3)software for data processing and real-time display. The contact pressure test of wiper blade and front glass of vehicle was performed with wiper blade by 40cm. Generally spring force of wiper arm is designed at 0.7∼1kN. Test results of total force was 9.4N and 7.1N in each driver and passenger toward. The paper suggested possibility for base definition in wiper design. A windshield wiper blade experiment revealed that the system successfully measured the contact force distribution during static state, showing the usefulness of the developed system.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.4
• /
• pp.94-100
• /
• 2002

The conventional sliding mode control (SMC) technique requires a priori knowledge of the upperbounds of disturbances and/or modeling uncertainties to assure robustness. This, however, may not be easy to obtain in practical situation. This paper presents a new methodology, a sliding mode control with disturbance estimator (SMCDE), which offers a robust control performance without a priori knowledge about the disturbance. The proposed technique is featured by an average value of the imposed disturbance over a certain period. A nonlinear spring-mass-damper system and a two-link robot system are adopted as illustrative application examples. Control performances such as estimation error and tracking error are compared between the proposed methodology and conventional scheme.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.5
• /
• pp.477-485
• /
• 2000

The data set was collected on fifty-eight different days with a 24-h sampling period from October 27, 1995 through August 25, 1996. From the chemical mass balance (CMB) analysis of $PM_{2.5}$ in the Chongju area, the contributions from soil, gasoline, diesel, light and heavy oil combustion were 2.6%, 15.4%, 9.0%, 28.8% and 1.5%, respectively. Residual $NO_{3}^{-}$), residual $SO_{4}^{2-}$ and residual OC, possibly formed in the atmosphere. represented additional 8.0, 10.2, and 1.6% of the $PM_{2.5}$, respectively. Other unidentified sources constituted the remaining 22.9%. From the CMB analysis, the $PM_{2.5}$ source contribution for fall, winter, spring and summer were 92, 76.8, 77.5 and 59.2%, respectively.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.3
• /
• pp.191-196
• /
• 1994

Concentration of particulate nitrate originated from sea salt in ambient air was determined from February to October 1993. Sampling was carried out using a two-stage Anderson air sampler at the top of a five-story building located at Kon-Kuk University in Seoul. Concentration of NaNO$_3$, which originated from sea salt was highest in spring time and lowest in summer the and the concentration range was between 0.10 and 0.66 $\mu\textrm{g}$/㎥. NaNO$_3$/TSP ratio was very low 0.05~0.39%) indicating that the portion of NaNO$_3$ in TSP was negligible.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.4
• /
• pp.307-317
• /
• 1997

Samples of fine particle $(d_P<2.5 \mum)$ were taken in Chongju area using a dichotomous sampler. The data set was collected on fifty-eight different days with 24 hour sampling period from October 27, 1995 through August 25, 1996. The samples were analyzed using a proton induced x-ray emission (PIXE) for Na, Mg, Al, Si, S, Cl, K, Ca, Ti, V, Cr, M, Fe, Ni, Cu, Zn, Br and Pb. Values of Fe, Ca, Si, Cu, K and Cl exhibit marked seasonal variations. Mean concentrations for this study had the following order S > Cl > Si > K > Al > Fe on fine particle. Concentrations of Ca, Si and Fe were higher during the spring season compared with any other season. These phenomena may be attributable to soil dust. Cl and K were higher in the winter, which may be explained by combustion of fossil fuel. Higher values for Cu and Zn in the Winter may be due to the combustion and incineration.

• Journal of Korean Society on Water Environment
• /
• v.32 no.1
• /
• pp.1-14
• /
• 2016

This study was conducted to develop a Benthic macroinvertebrates streambed index (BMSI) based on the response of the community to the substrate type of streambed. Analyzing the seasonal (Spring and Fall) data (11,367 sampling units) surveyed and collected during 2008~2014 at 960 sites in South Korea, we estimated the lithophility of 191 taxa. BMSI was composed of the lithophilic value, indicator weight value and individual abundance frequency. It showed an extremely significant correlation (r = -0.8, p<0.001) with the mean grain size (in phi-value) of the streambed.

• Journal of Environmental Science International
• /
• v.14 no.5
• /
• pp.463-471
• /
• 2005

This study is designed to investigate the characteristics of $PM_{10}$ concentration and the chemical composition of heavy metallic components in the $PM_{10}$ sampled in western Busan from March to May, 2003. $PM_{10}$measurement was done during springtime of 2003, totaling 29 days: 9 days in March, 10 days in April and 10 days in May. With a sampling time of 24 hours, it started 9:00 AM on that day and ended 9:00 AM the next day. The mean contribution ratio of soil during springtime was $10.3\%$. Al had a significant correlation with Ca, Fe, Mg and Si and little correlation with Na, Ni and Zn.

• The Research Journal of the Costume Culture
• /
• v.14 no.2
• /
• pp.299-309
• /
• 2006

This study was intended to analyze the wearing practices and the subjective fabrics preferences for men's dress shirts. It was performed by means of convenience sampling survey of male office workers wearing dress shirts who were living in Seoul, Geonggi, and Chungcheong area. Collected data were analyzed by frequency analysis, cross-tabulation analysis, t-test, and ANOVA using SPSS. The results were as follows: Most of the male office workers owned 5 dress shirts, and blue color dress shirts were preferred to white one. It was shown that most of the respondents wore dress shirts at the office almost every day with necktie. The preferred sensations of the dress shirt fabrics were the soft, wrinkle-free, smooth and dry ones. There were partially significant differences according to gender and age of male office workers in the wearing practices and subjective fabrics preferences of dress shirts.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.1
• /
• pp.165-171
• /
• 2002

The conventional sliding mode control(SMC) technique requires a priori knowledge of the upperbounds of disturbances or/and modeling uncertainties to assure robustness. This, however, may not to be easy to obtain in practical situation. This paper presents a new methodology, sliding mode control with disturbance estimator(SMCDE), which offers a robust control performance without a priori knowledge about the disturbance. The proposed technique is featured by an average value of the imposed disturbance over a certain period. A nonlinear spring-mass-damper system is adopted as an illustrative example, and a comparative work between the conventional technique and the present one is undertaken.

• Journal of Food Hygiene and Safety
• /
• v.12 no.1
• /
• pp.78-82
• /
• 1997

Surface swab samples from beef (188), pork (240) and chicken (95) carcasses were collected from slaughterhouse in Kangwon and Kyunggi areas from March through July 1996. The samples were examined on the level of E. coli biotype I relevant to fecal contamination due to unsanitary processing control and the existence of verocytotoxin-producing E. coli (VTEC). E. coli biotype I were confirmed from 38.8% of beef, 40.0% of pork, and 69.5% of chicken carcasses. Little variation was noted among three sampling points; rump, flank and neck of beef, ham, belly and jowls of pork. coli O157:H7 was only confirmed from 2 of 188 beef carcasses. E. coli biotype I. All the isolated E. coli O157 showed positive for vero cell cytotoxicity test. Isolation rate of E. coli O157 in summer was higher than in spring. In case of pork and chicken carcasses, E. coli O157 was isolated in summer only.