• 한국가축번식학회지
• /
• 제13권1호
• /
• pp.1-6
• /
• 1989

A field survey was conducted to obtain the data on reproductive performation of Korean native cattle. The data for this study were taken from 6,461 breeding records of cows raising at general farms in 8 Hanwoo(native cattle) pure breeding areas from June, 1984 through November, 1985. The recycling rate within 30 days, 31 to 60 days, and 61 to 90 days postpartum was 7.5%, 40.0%, and 32.8%, and it amounted to 80.3%, while the non-recyling rate up to 120days postcalving was 8.4%. Conception rate according to insemination(AI) frequencies was 65.7% at 1st AI, 21.3% at 2nd AI, and 8.4% at 3rd AI, respectively. It amounted to 95.4% up to 3rd AI. Clving rate during the spring time was the highest, 39.6%, and tended to be reduced according to summer(31.6%), autumn (16.3%), and winter (12.5%). Spring and summer were the highest seasons for pregnancy and their gestation rates are 33.7% in spring and 39.2% in winter, respectively. The days from calving to estrus and conception, and calving interval of the cows, which calved two or three times, tended to be reduced. However, the more parities, the more they are extended. According to parities, gestation length and services per conception showed irregular tendencies.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.165-172
• /
• 2005

In MEMS (Micro-Electro-Mechanical System), packaging induced stress or stress induced structure deformation becomes increasing concerns since it directly affects the performance of the device. In the decoupled vibratory MEMS gyroscope, the main factor that determines the yield rate is the frequency difference between the sensing and driving modes. The gyroscope, packaged using the anodic bonding at the wafer level and EMC (epoxy molding compound) molding, has a deformation of MEMS structure caused by thermal expansion mismatch. This effect results in large distribution in the frequency difference, and thereby a lower yield rate. To improve the yield rate we propose a packaged SiOG (Silicon On Glass) process technology. It uses a silicon wafer and two glass wafers to minimize the wafer warpage. Thus the warpage of the wafer is greatly reduced and the frequency difference is more uniformly distributed. In addition. in order to increase robustness of the structure against deformation caused by EMC molding, a 'crab-leg' type spring is replaced with a semi-folded spring. The results show that the frequency shift is greatly reduced after applying the semi-folded spring. Therefore we can achieve a more robust vibratory MEMS gyroscope with a higher yield rate.

• 대한가정학회지
• /
• 제30권4호
• /
• pp.15-26
• /
• 1992

To investigate the seasonal effects on physiological responses of human body, clothing micro-climate, and subjective sensation, selected the cloths the most frequently dressed by men in spring and fall, and completed wearing trials in the climatic chamber. The results are as follows: 1. Rectal temp. ranged 36.8-37.1$^{\circ}C$ in either spring or fall, and no seasonal effect was found. 2. In skin temp., there was no seasonal effect in forehead, abdomen, and forearm. Skin temp. of chest was higher in spring than in fall. On the contrary, reverse was true in high and leg. Average skin temp. ranged 32.2-33.2$^{\circ}C$ in spring and 32.9-34.$0^{\circ}C$ in fall. 3. Average total sweat rate of spring, 79.4g/hr, was smaller than that of fall, 110.9g/hr. 4. Clothing temp. ranged 28.1-32.8$^{\circ}C$ in spring and 27.6-31.$0^{\circ}C$ in fall. Clothing humidity ranged 36.9-48.9% in spring and 38.2-51.1% in fall. Therefore, clothing microclimate was higher during fall than during spring. As results, skin temp. of the body core except chest did not show seasonal variation, but there was obvious seasonal variation in skin temp. of the extremities. Therefore, seasonal variation should be take into consideration in the experiments related to the cloth. In addition, standard for each season and the degree of work performance should be re-established in clothing micro-climate.

• 한국생산제조학회지
• /
• 제9권5호
• /
• pp.87-95
• /
• 2000

The numerical analysis and the experiments are carried out to develop the design program for the flow control valve attached to the vane pump for power steering. The factors affecting the flow rate characteristics are analyzed by the experiments and the numerical analysis. The results are summarized as follows; (1) the main factors affecting to the first and second control flow rate are the diameter of big and small rod of the spool. (2) the cut off is mainly affected by the main spring constant, the initial displacement of main spring and the small diameter of the spool. (3) the dropping slope characteristics are decided by the chamfer of spool and the dynamic characteristics of the spool.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제2권1호
• /
• pp.65-68
• /
• 2001

A new silkworm variety, Chunsujam, for spring rearing season is F$_1$ hybrid between Japanese race Jam145 bred by 8459/8711 and Chinese race Jam146 by 8544/M8626. Jam145, Japanese parent of the Chunsujam, showed high GCA in pupation rate and Jam146, Chinese parent, showed high GCA in pupation rate and single cocoon weight. In the local adaptability test performed at 8 local areas in spring of 1999, Chunsujam was 5% higher in larval weight, 3% in single cocoon weight, and 4% in cocoon yield from 10,000 of the 3rd molted larvae, respectively, than the check variety Baegokjam.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• 제3권4호
• /
• pp.199-203
• /
• 2022

The spring home range and habitat use of the spot-billed duck in Korea were studied using GPS-mobile phone-based telemetry (WT-300). The study areas were Anseong-si, Seosan-si, Nonsan-si, and Sejong-si. Analysis was performed using minimum convex polygon (MCP) and kernel density estimation (KDE) spot-billed ducks had an average home range of 70.28 km² (standard deviation [SD]=84.50, n=6), and a core habitat (50%) 2.66 km² (SD=2.60, n=6), according to MCP and KDE, respectively. Wetlands (41.5%) and rice fields (35.7%) were highly used as habitats. The rice field use rate was high during the day, and the wetland utilization rate was high at night. Rice fields and wetlands were the primary habitats in spring.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1757-1760
• /
• 2005

This paper is concerned with spring back after sheet forming of bulk amorphous alloys in the super cooled liquid state. The temperature-dependence and strain-rate dependence of Newtonian/non-Newtonian viscosities as well as the stress overshoot/undershoot behavior of amorphous alloys are reflected in the thermo-mechanical Finite Element simulations. Hemispherical deep drawing operations are simulated for various forming conditions such as punch velocity, die corner radius, friction, blank holder force, clearance and initial forming temperature. Here, spring back by an instantaneous elastic unloading was followed by thermal deformation during cooling and two modes of spring backs are examined in detail. It could be concluded that the superior sheet formability of an amorphous alloy can be obtained by taking the proper forming conditions for loading/unloading.

• 소성∙가공
• /
• 제14권9호통권81호
• /
• pp.751-755
• /
• 2005

This paper is concerned with spring back after sheet forming of bulk amorphous alloys in the super cooled liquid state. The temperature-dependence and strain-rate dependence of Newtonian/non-Newtonian viscosities as well as the stress overshoot/undershoot behavior of amorphous alloys are reflected in the thermo-mechanical Finite Element simulations. Hemispherical deep drawing operations are simulated for various forming conditions such as punch velocity, die comer radius, friction, blank holder force, clearance and initial funning temperature. Here, spring back by an instantaneous elastic unloading was followed by thermal deformation during cooling, and two modes of spring back are examined in detail. It could be concluded that the superior sheet formability of an amorphous alloy can be obtained by taking the proper forming conditions for loading/unloading.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 추계학술대회
• /
• pp.44-44
• /
• 2019

Spring sowing of ginseng seeds often results in failure of seedling establishment. Storage condition during winter, sowing time, and seed treatment might effect on germination. Here we tested effects of temperature regimes of seed storage on spring sowing. Dehisced wet or dry ginseng seeds were stored at $2^{\circ}C$, $-2^{\circ}C$, $-3.5^{\circ}C$, or alternating temperature: at $2^{\circ}C$ until December, $-3.5^{\circ}C$ in January, and $2^{\circ}C$ in February, and sowed in March. In overall, emergence rate was dependent on storage temperature, and $-3.5^{\circ}C$ resulted poorest emergence than other conditions. Storage of wet seeds in alternating temperature resulted highest emergence rate. Seed dry also affected on emergence rate, while it was dependent on the storage temperature. In terms of growth, storage at $2^{\circ}C$ as wet seed resulted highest growth, and dried seeds resulted poorer growth than wet seeds. As a modification of alternating temperature, seeds were stored at $2^{\circ}C$ at first, then transferred to $-3.5^{\circ}C$ at Nov 30, Dec 20, and Jan 10, each. When transfer date was delayed, emergence rate was increased. We suggest that seed storage temperature for ginseng should not be decreased below $-2^{\circ}C$, and alternative temperature regime for successful spring sowing could be useful.

• 한국버섯학회지
• /
• 제17권3호
• /
• pp.93-98
• /
• 2019

We investigated the correlation between density of air and the infection rate of airborne microorganisms in mushroom cultivation facilities and found that the correlation was low in places where the infection rate during cultivation was less than 1%. The farms with an infection rate of 2~5% showed a high infection rate in the inoculation room in spring and summer seasons, and in the incubation room in autumn, and the farms with an infection rate of more than 6% showed infection in all the rooms regardless of the season. The farms where the Trichoderma sp. was investigated at the time of the mushroom cultivation showed the highest infection rates of 3.17%, 2.74%, and 2.64% in summer, spring, and autumn, respectively. The farms infected with Neurospora tetrasperma showed a lesser rate of infection than the ones infected with Trichoderma sp., and the highest infection rate of 0.56% was observed in summer. Based on these results, the type of infection could be classified into five groups, where type I was farms where the infection rate is less than 1% in all seasons. Three farms belonged to this type, and the infection rate in this type was lower than that in the other types.