• 한국구조물진단유지관리공학회 논문집
• /
• 제12권1호
• /
• pp.193-202
• /
• 2008

본 논문은 분사식 FRP의 압축 구속효과와 휨 보강 효과 및 분사식 FRP의 반발률에 대한 실험적 연구이다. 분사식 FRP란 레진과 짧게 잘려진 섬유를 고압의 공기에 의해 적용면에 분사하여 보강하는 기법이다. 분사식 FRP의 구속 및 휨 보강 효과를 알아보기 위하여 원주형 공시체와 휨 공시체를 제작하여 FRP를 분사하여 보강하였고, 보강 재료로 유리섬유와 폴리에스테르 수지를 사용하였다. 최적의 보강 조건을 알기 위해 섬유 길이, 보강 두께, 섬유 혼입비, 콘크리트 강도에 따른 실험을 실시하였고, 분사식 FRP 보강법을 섬유 매트에 의한 보강법과 비교하였다. 또한, 분사식 FRP의 반발률 역시 평가하였다. 실험을 통하여 분사식 FRP의 최적 조건을 결정하였다. 본 연구의 분사식 FRP 보강은 유리 섬유 매트에 의한 보강법 이상의 성능을 발휘하였다.

• Corrosion Science and Technology
• /
• 제19권2호
• /
• pp.51-56
• /
• 2020

The objective of this study was to improve properties of plasma sprayed HAp layer to titanium substrate by introducing an intermediate layer with two different methods. Before applying Zn doped HAp coating on titanium substrate, an intermediate layer was introduced by titanium plasma spray or titanium anodization. Heat treatments were conducted for some samples after titanium intermediate layer was formed. Zn doped HAp top layer was applied by plasma spraying. Three-point bending test and pull-off adhesion test were performed to determine the adhesion of Zn doped HAp coatings to substrates. Long-term credibility of Zn doped HAp plasma sprayed coatings on titanium was assessed by electrochemical impedance measurements in Hanks' solution. It was found that both titanium plasma sprayed and titanium anodized intermediate layer had excellent credibility. Strong adhesion to the titanium substrate was confirmed after 12 weeks of immersion for coating samples with titanium plasma sprayed intermediate layer. Samples with titanium anodized intermediate layer showed good bending strength. However, they showed relatively poor resistance against pulling off. The thickness of titanium anodized intermediate layer can be controlled much more precisely than that of plasma sprayed one, which is important for practical application.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권5호
• /
• pp.695-701
• /
• 1999

Thermal sprayed Ni-Cr alloy coating on the carbon steel was carried out erosion-corrosion test and electrochemical corrosion test in the marine environment. THe erosion-corrosion behavior and electrochemical corrosion characteristics of substrate(SS400) and thermal sprayed Ni-Cr coating was investigated, The erosion-corrosion control efficiency of Ni-Cr coating to substrate was also estimated quantitatively.

• KSBB Journal
• /
• 제28권5호
• /
• pp.275-281
• /
• 2013

Soil microbial community analysis of farmland soil sprayed with lye in order to use fertilizer in Nigeria was performed. As a control, two kinds of soils not sprayed with lye, located in Eungo and Lagos with general practice in agriculture was selected. Soil sprayed with lye was pH 8.25 through alkalization reaction, while the other soil samples were pH 6.22 and 5.94. Substrate utilization and species diversity index of soil sprayed with lye were low than that of the other soils with the analysis of Biolog ecoplate. As a result of principal component analysis, the relationship between three samples was low. Microbial community analysis was performed by DGGE and most of them were soil uncultured bacterium. Especially, Uncultured Acidobacteria and Uncultured Methylocystis sp., which had been isolated from the rhizosphere of soybean grown in that site were discovered in the soil sprayed with lye.

• Journal of Welding and Joining
• /
• 제17권6호
• /
• pp.62-69
• /
• 1999

The advantages of Thermal sprayed coatings as a replacement for cast iron liners are reduced weight, better heat transfer and reduced cost. One of the most important performance attributes of a cylinder bore coating is its wear resistance, since it must survive the abrasive sliding of both the piston rings and the piston skirt. In this study, composite powders were prepared by ball milling of Al-13Si-3Mg(wt%) alloy with SiC particles. The concentrations of SiC were 40 and 60wt%. The composite powders were sprayed using Metco-9MB plasma torch. Plasma sprayed coatings were heat-treated at 500℃ for 3 hours. The wear resistances of the plasma sprayed coatings were found to improve with heat treatment and superior to the commercially available G.C.I.(gray cast iron). AlSiMg-40SiC heat-treated coatings showed the best wear resistance in this study.

• Journal of Welding and Joining
• /
• 제19권1호
• /
• pp.95-103
• /
• 2001

The properties of the detonation sprayed cermet coating are investigated through the mechanical, corrosion and erosion test. The test results are also compared with the properties of the substrate materials, STS 329J1, dual phase stainless steel and the plasma sprayed cermet coatings. The two kinds of carbide cermet power, WC+NiCr, Cr$_3$C$_2$+NiCr were used in this experiment. The experimental results showed that the anti-corrosive and anti-erosive properties of the detonation sprayed cermet coatings are superior to the plasma sprayed cermet coatings. The WC+NiCr cermet coating appears to be more effective than Cr$_3$C$_2$+NiCr cermet coating in abrasive erosion environment, whereas the Cr$_3$C$_2$+NiCr cermet coatings are more effective in cavitation erosion environment.

• 한국표면공학회지
• /
• 제22권1호
• /
• pp.26-42
• /
• 1989

It has between investigated that the optimum spaying conditions, such as, spraying distance, fusing temperature and fusing time, ect, in a Ni-cr base self fluxing alloy sprayed on the mild steel substrate by oxygen-acetylenc flame spraying. Sprayed specimens on various conditions were fuused in a vacuum furnace and the results were as follows. The optimum spraying condition for excellent coating layer are obtained under spraying distances, fusing temperature and fusing and time ; 180~240mm,1050~110$0^{\circ}C$and 15~30min, respectively. The adhesive strength and surface hurface hardness of the as sprayed specimens were very low by mechanical bonding becaus of the diffusion layer during process. The carbides and borides and formed in the sprayed coating layer and densification of the layer was resulted from the elimination of pores and oxides. The hardness of sprayed coating layer, particularly in the high temperature, was superior to ordinary tool steels.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.133-136
• /
• 2006

The main purpose of this study is to develop a Sprayed FRP repair and strengthening method, which is a new technique for strengthening the existing concrete structures by mixing carbon or glass shot fibers and the epoxy or vinyl ester resins with high-speed compressed air in open air and randomly spraying the mixture onto the concrete surface. At present, the Sprayed FRP repair and strengthening method using the epoxy resin has not been fully discussed. In this study, a series of experiments are carried out to evaluate the strengthening effects of the flexural and shear concret beams strengthened with the Sprayed FRP method. The results revealed that the strengthening effects of the flexural and shear specimens are similar, compared to those of the FRP sheet.

• 자원리싸이클링
• /
• 제22권3호
• /
• pp.18-27
• /
• 2013

본 연구에서는 광산 스프레이 콘크리트에 대한 연구개발의 일환으로 산업부산물을 구조재료인 시멘트에 혼입하여 산업부산물의 재활용 극대화 방안을 제시하였다. 또한 이를 통해 안정성과 경제성을 모두 만족할 수 있는 친환경적인 광산 스프레이 콘크리트의 배합비를 도출하고 평가하였다. 연구 결과 광물성 혼화재를 사용한 콘크리트 강도는 증가하였으며, 현장시험에서도 양호한 결과가 도출되었다. 그러므로 산업부산물을 이용한 광산 스프레이 콘크리트는 향후 현장적용이 가능할 것으로 판단되었다.

• Journal of Welding and Joining
• /
• 제20권1호
• /
• pp.76-82
• /
• 2002

In these days, many advanced nations have enforced import restrictions against things emitting electromagnetic wave which has report that it is so harmful. In general, electromagnetic wave is composed of electric wave and magnetic wave. The reflection of electromagnetic wave is mainly reflected by conductive materials and the magnetism loss is generated by magnetic ferrite. The magnetism loss of ferrite is separated by eddy current loss, residual magnetism loss and hysteresis loss. Thermal sprayed coating is intended to manufacture because of simple processes and high efficient electromagnetic wave shielding. The high efficient thermal sprayed coatings were made from the magnetic ferrite materials that characterizes absorption of electromagnetic wave, and the electric conductive materials that characterize emitting of electromagnetic wave. This study was manufactured thermal sprayed coatings to improve absorption-efficiency, and measured the electromagnetic wave shielding efficiency. As the experimental results, high electromagnetic wave shield efficiency was obtained at wave frequency 2GHz to thermal sprayed ferrite coatings manufactured by size distribution range of spray powders, $38~88\mu\textrm{m}$.