• 제목/요약/키워드: Spray-dried

검색결과 236건 처리시간 0.03초

인삼제품(人蔘製品)의 품질안정성(品質安定性)에 관한 연구(硏究) -5. 홍삼정분(紅蔘精粉)의 흡습물성(吸濕物性) 개선(改善)- (Studies on Stability for the Quality of Ginseng Products -5. Improvement of Physical Properties on Moisture Sorption of Spray Dried Red Ginseng Extract Powder-)

  • 최진호;변대석;노재일;박길동;성현순
    • 한국식품영양과학회지
    • /
    • 제13권3호
    • /
    • pp.251-258
    • /
    • 1984
  • 홍삼정분(紅蔘精粉)의 흡습물성(吸濕物性) 개선(改善)에 의한 품질안정성(品質安定性)을 유지(維持)하기 위하여 천연(天然)고무질, 다당류(多糖類), 단백질(蛋白質) 및 지질(脂質) 등을 첨가(添加) 및 피막처리(被膜處理)하여 흡습율(吸濕率), 용해도(溶解度), 침강속도(沈降速度) 등을 비교(比較)하였으며 학대조건(虐待條件)하에서 장기저장(長期貯藏)하면서 피막처리제품(被朧處理製品)의 품질안정성(品質安定性)을 비교(比較)하였다. 1. 첨가제(添加劑) 자체의 방습효과(防濕效果)는 casein>dextrin>starch>aviceil의 순(順)이었으며 첨가(添加)했을 때는 corn oil + tween 40>starch>case의 순(順)으로 효과(效果)가 인정되었으나 대조구(對照區)에 비해 1%의 첨가(添加)로는 만족할만한 효과(效果)를 기대할 수 없었다. 2. 홍삼정분(紅蔘精粉)의 피막처리(被膜處理)에 사용된 피막제(被膜劑) 중에서 AEA, CAP 등은 방습효과(防濕動果)를 인정할 수 없었지만 HPC, corn oil, lecithin, HPC+corn oil등은 상당한 방습효과(防濕效業)가 인정되었으며 피막처리(被膜處理) 전에 홍삼정분(紅蓼精粉)의 초기수분함량(初期水分含量)을 조정(調整)할 필요가 있다고 판단되었다. 3. 1%이하의 피막제(被膜劑)처리(處理)에 의한 홍삼정분(紅蓼精粉)의 용해도(溶解度)에는 문제(問題)가 없었으며 침전속도(沈澱速度)를 비교(比較)하더라도 대조구(對照區) (65.1 sec)에 비해 1% HPC, 1% corn oil, 1% lecithin, 1% HPC +0.5% corn oil 처리구(處理區)(95.2${\sim}$114.3 sec)는 4.5${\sim}$l.8배(培) 높아 용해도(溶解度) 등 상품가치유지(商品價値維持)에 바람직하였다. 4. 피막제(被膜劑) 처리제품(處理製品)의 흡습율(吸濕率)을 대조구(對照區)를 100%로 하여 비교(比較)했을 때 $0.5{{\sim}}1.0%$의 lecithin 처리구(處理區)는 $54{{\sim}}56%$, 0.8%의 corn oil 처리구(處理區)는 $51{{\sim}}55%$, 0.8%의 cellulose acetate 처리구(處理區)는 $52{{\sim}}54%$로서 대조구(對照區)에 비(比)해 약 2배(倍)정도의 방습효과(防濕效果)가 인정되었다. 5. 피막제(被膜劑) 처리제품(處理製品)을 최학대조건(最虐待條件)($48{\pm}2^{\circ}C$, 75%RH)에서 3개월간(個月間)의 저장실험결과(貯藏實驗結果), $0.8{{\sim}}1.0%$의 corn oil 처리구(處理區) $0.5{{\sim}}0.8%$의 cellulose acetate(DES) 처리구(處理區) 및 1%의 lecithin(DES) 처리구(處理區)는 전연 흡습(吸濕)이 나타나지 않았으며 응고(凝固) 및 용해도(溶解度) 등에 아무런 이상(異狀)이 없으므로 3년(年)이상의 유효기간(有效期間)을 설정(設定)할 수 있다고 판단되었다. 6. 따라서 첨가제(添加劑)의 효과(效果)는 크게 기대(期待)할 수 없으나 corn oil, cellulose acetate 및 lecithin등의 피막처리(被膜處理)에 의하여 홍삼정분(紅蔘精粉)의 품질안정성(品質安定性)이 유지(維持)될 것이며, 이때 초기수분함량(初期水分含量)을 조정(調整)하는 것이 더욱 바람직 할 것으로 판단된다.

  • PDF

The Effect of Spray-dried Porcine Plasma and Tryptophan on Feed Intake and Performance of Weaning Piglets

  • Hsia, Liang Chou
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제18권1호
    • /
    • pp.75-79
    • /
    • 2005
  • There were three trials involved in this experiment. All piglets in Trial 1 were randomly distributed into the following 4 treatments. Treatment 1. Corn-soybean diet with 5% SDPP. The tryptophan level was 0.237%. Treatment 2. Corn-soybean diet with 10% meat and bone meal. The tryptophan level was 0.177%. Treatment 3. Treatment 1+0.0662% synthetic tryptophan. The total tryptophan level was 0.303. Treatment 4. Treatment 2+0.0662% synthetic tryptophan. The total tryptophan level was 0.236. Piglets in Trial 2 were distributed randomly into the following 4 treatments. Treatment 1: corn-soybean diet+10% meat and bone meal. The total tryptophan level was 0.176%. Treatment 2: corn-soybean diet+10% meat and bone meal+5% SDPP. The total tryptophan level was 0.180%. Treatment 3: Treatment 1 diet+0.004% synthetic tryptophan. The total tryptophan level was 0.180%. Treatment 4: Treatment 1 diet+0.631% synthetic tryptophan. The total tryptophan level was 0.237%. There were 4 treatments in Trial 3. Treatment 1: cornsoybean diet+10% meat and bone meal. The total tryptophan level was 0.176%. Treatment 2: Treatment 1 diet+0.061% synthetic tryptophan. The total tryptophan level was 0.237%. Treatment 3: Treatment 2 diet+0.061% synthetic tryptophan. The total tryptophan level was 0.298%. Treatment 4: corn-soybean diet+10% meat and bone meal+5% SDPP. The total tryptophan level was 0.180%. The results of Trial 1 showed that the piglets ate significantly more (p<0.05) when feed included SDPP in the diet during the first 2 weeks. The feed intake also increased when synthetic tryptophan was added in the 5% meat and bone meal diet; however, the difference did not reach a significant level (p>0.05) during the first 2 weeks. Three weeks onwards the feed intake of 5% meat and bone meal treatment was significantly lower (p<0.05) than for the other three treatments. The results of Trial 2 showed that the feed intake could be significantly improved only when the total tryptophan level reached 0.237%. Piglets in the 5% SDPP treatment had higher feed intake than piglets in 10% meat and bone meal treatment with 0.180% of tryptophan, but did not reach a significant level (p<0.05). Body weight gain also had the same trend as feed intake. The pigs in Treatment 1, the lowest total level of tryptophan treatment (0.176%), had lowest feed intake and weight gain, but the difference did not reach a significant level (p>0.05). The pigs in Treatment 1 of Trial 3 had the lowest feed intake and weight gain (p>0.05). Treatment 2 (0.237%) had the highest average feed intake from Week 1 to Week 5; the second best result was recorded in Treatment 4. As for the weight gain of the piglets in Treatment 4 (5% SDPP), they had a higher average weight during the first 3 weeks. The feed efficiency was better for Treatment 4 (5% SDPP) during the first 2 weeks. The results of these trials showed that both SDPP and tryptophan had a trend to improve the feed intake and weight gain.

NIR as a tool for optimizing sampling time and studying batch dynamics.

  • Zeppelin, Joanna
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1126-1126
    • /
    • 2001
  • The paper presented here is the initial part of a larger study, in which it was determined which quality parameters in cheese powder could already be predicted by NIR at an early stage in the process and which could only be predicted at the final stages of the process. This initial study was performed in order to establish the levels and nature of variation within and between batches such that the subsequent data collection could be tackled optimally. The perspectives evolved into more than was originally planned and revealed some interesting uses of NIR-technology. Cheese powder production starts as a batch process, where waste cheese from other dairies is melted down in a vat. The process then turns into a continual process as the vat is emptied and the melted cheese is then filtered, homogenized, pasteurized and finally spray dried. Between each batch the powder is to a greater or lesser degree a mixture of 2 batches. This paper is divided into 2 aspects, one regarding the optimization of sampling time and the other is a study of process dynamics. Optimizing sampling time This initial study included 9 powder samples from 9 different batches produced during one day. The raw materials for the batches were chosen with the aim of creating a relatively high level of variation in the data. The total of 81 samples were taken out at regular intervals and spectra were collected on a NIR-systems 6500 instrument. The subsequent reduction of the data by PCA to score values shows the power of NIR as a tool to determine not only when samples are representative of a certain batch, but also which batches are stable enough to include in a further study. Studying process dynamics To take this experiment a step further 1 of the 81 samples were sent to the laboratory for further analyses. The samples were chosen on the criteria that they covered the spectral variation in the dataset. These samples were analysed for 4 chemical components and 5 physical attributes, which are essential for describing the quality of the product. The latent structure of the 7 samples, using the chemical and physical variables, is totally comparable to the latent structure of the NIR spectra. This outcome makes it possible to describe the dynamics of one day's production both chemically and physically with relatively little resources. Additionally it raises the question as to whether reference values are needed, as the latent structure of the NIR-spectra appears to be sufficient in providing information on the quality of the product. To be able to use NIR in this way would require defining quality limits in the principal component space as opposed to each of the reference values. The potential of NIR applied in an explorative fashion with batch processes opens a whole new gateway for the use of this technology. This study explains yet again after so many years in the field “why I'm crazy about NIR!”.

  • PDF

고추씨 중 농약 잔류와 고추씨 기름으로 농약의 이행 (Pesticide residues in chili pepper seeds and their transfer into the seed oil)

  • 이미경;김종성
    • 한국식품과학회지
    • /
    • 제48권4호
    • /
    • pp.317-322
    • /
    • 2016
  • 노지재배 고추(chili pepper)에 difenoconazole, lambda-cyhalothrin 및 lufenuron 세 성분 혼합 농약을 안전사용기준 보다 5배 높은 농도로 살포한 후 수확기에 홍고추를 수확했다. 수확한 고추를 수세 및 건조한 후 고추씨로부터 기름을 추출하고 이들 각 시료에 대해 농약 잔류량을 분석하였다. 그 결과 수확한 생 홍고추에 difenoconazole, lambda-cyhalothrin 및 lufenuron 성분이 각각 4.43, 0.334, 1.56 mg/kg으로 잔류했으며 수세에 의해 각각 91.4, 94.3, 85.3% 수준으로 잔류농도가 낮아졌다. 건조에 따른 difenoconazole, lambda-cyhalothrin 및 lufenuron 성분 각각의 농약 가공계수는 5.01, 4.94, 4.19로서 고추 건조에 따른 무게 증가 비율 4.6배를 잘 반영했고 건조과정 중 농약성분의 소실이 전혀 일어나지 않았음을 나타냈다. 고추씨에서는 difenoconazole과 lambda-cyhalothrin은 정량한계 이하(<0.005 mg/kg) 그리고 lufenuron은 두 시료에서 정량한계 이하(<0.005 mg/kg), 한 시료에서 0.0075 mg/kg으로 검출되어 고추 과피에 잔류하는 농약이 고추씨까지 이행되는 양은 거의 무시되는 수준임을 보여주었다. 그러나 고추씨 기름에서 difenoconazole과 lufenuron이 각각 0.0263, 0.0295 mg/kg으로 검출되어 고추씨 기름에서의 농약 농축계수가 difenoconazole 5.26, lufenuron 4.72로 나타났다. 이러한 결과는 지용성이 강한 농약성분의 유지에 대한 이론적 농축계수 6.8배를 잘 설명해준다. 정제과정 없이 압착 방식에 의해 추출되는 고추씨와 같은 식용유지에서 농약성분이 검출될 가능성이 있으므로 앞으로 이에 대한 더 많은 연구가 있어야 할 것이다.

Effects of Fermented Soy Protein on Nitrogen Balance and Apparent Fecal and Ileal Digestibility in Weaned Pigs

  • Yoo, J.S.;Jang, H.D.;Cho, J.H.;Lee, J.H.;Kim, I.H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제22권8호
    • /
    • pp.1167-1173
    • /
    • 2009
  • This study was conducted to evaluate the effects of providing fermented soy protein to weaned pigs on nitrogen balance and apparent fecal and apparent ileal digestibility (AID) of AA. Four weaned ((Yorkshire${\times}$Landrace)${\times}$Duroc) barrows (BW = 6.58${\pm}$0.98 kg), surgically fitted with a simple T-cannula approximately 15 cm prior to the ileo-cecal junction, were fed four diets according to 4${\times}$4 Latin square design. Diets were a basal diet supplemented with one of the following: 3% SDPP (spray dried plasma protein), 5% RBP (soy protein fermented by Lactobacillus spp.), 5% PSP (soy protein fermented by Aspergillus oryzae and Bacillus subtilis), and 2.5% RPP (2.5% RBP+2.5% PSP). No differences were observed in DM and N intakes among treatments. However, the level of urine excretion was greater in the RPP group than in the PSP group. Additionally, fecal DM excretion, fecal N concentration and fecal N excretion were increased in the RBP, PSP and RPP groups when compared with the SDPP group (p<0.05). Furthermore, total excretion was increased in the RPP group when compared with the PSP group (p<0.05). In addition, N absorption and the N absorption ratio were higher in the SDPP group than in the RPP group (p<0.05). Moreover, the DM and N digestibilities were lower in the RBP, PSP and RPP groups than in the SDPP group (p<0.05), and the ash and energy digestibilities were higher in the SDPP and RBP groups than in the PSP and RPP groups (p<0.05). However, no significant differences were observed in the DM, N, Ash, Ca, P or ileal digestibilities among treatments, although the energy digestibility was higher in the SDPP group than the RBP group (p<0.05). In addition, the apparent ileal digestibilities of essential amino acids (Arg, His, Iso, Leu, Lys, Phe, Thr, and Val) were significantly higher in the SDPP group than in the other groups (p<0.05), and the levels of Ala, Cys, Glu and Try were greater in the SDPP treatment group than the RBP, PSP and RPP groups (p<0.05). Additionally, the levels of Asp, Gly and Ser were higher in the SDPP group than the PSP and RPP groups, and the level of Pro was higher in the SDPP group than the RPP group (p<0.05). Finally, total non-essential amino acid and total amino acid digestibility were higher in the SDPP group than in the other treatments (p<0.05). Taken together, the results of this study indicate that animal protein is more bioavailable than plant protein. However, the N absorption ratio and ileal digestibility were found to be similar in the SDPP and RBP groups.

한외여과에 의한 순물 농축액의 기능적 특성 (Functional Properties of Sunmul (Soybean Curd Whey) Concentrate by Ultrafiltration)

  • 김유풍;엄상미;장은정;김우정;오훈일
    • 한국식품과학회지
    • /
    • 제38권4호
    • /
    • pp.488-494
    • /
    • 2006
  • 두부 순물을 UF막으로 농축시켜 제조한 UF 분리농축분말의 일반성분 및 이들 분말을 식품에 첨가할 경우 반드시 고려해야 할 용해도, 유화력, 거품형성능에 대해 살펴보았다. 그 결과 일반 성분에 있어서, UF 분리농축분말의 수분함량과 탄수화물 함량은 순물과 큰 차이가 없었으며 단백질 함량은 순물분말보다 2배가량 높았으나 회분함량은 2배 낮았다. 유지흡착력을 비교 시 ISP>UF 농축분말>순물 순으로 높게 나타났으며 UF 분리농축 분말의 용해도가 ISP와 순물에 비해 높기 때문에 수분흡착력은 매우 미약하였다 UF 분리농축분말의 단백질의 용해도는 등전점 부근인 pH 4.0에서 가장 낮았으며 산성 또는 알칼리성으로 갈수록 증가하는 전형적인 단백질 용해도 곡선을 나타내었다. 유화력은 ISP와는 달리 pH에 따른 현화를 보이지 않으며 150-200 정도의 EAI 값을 나타내었고, 유화안전성은 pH 6.0 이하의 산성에서 더 높은 값을 나타내며 대체로 75-92%의 높은 유화안정성을 보였다. UF 분리농축분말의 거품형성능은 증류수 처리구간에서 ISP와는 달리 pH 4.0-6.0에서 가장 우수하였으며 NaCl 농도가 높을수록 약간 감소하는 경향을 나타내었고, 거품안정성을 측정한 결과 ISP에 비해 대두 단백질의 등전점인 pH 4.0 부근에서 5-7배 높은 거품안정성을 나타내었으나 pH 4.0을 제외한 모든 pH 구간에서 20분 안에 거품이 소멸되었다 UF 분리농축분말은 isoflavone 등 여러가지 기능적 성분을 함유하는 것으로 알려져 있을 뿐만 아니라 용해도, 유화력, 유화안정성, 거품형성능 등이 ISP보다 우수하여 식품가공에서 다양하게 활용될 수 있을 것으로 기대된다.

Methodologies for the Determination of Endogenous Phosphorus Losses in Growing Pigs

  • Alves, Debora Aline;da Rocha, Leonardo Tombesi;dos Santos Camargo, Claudiele Aparecida;Figueiredo, Andriele Medianeira;Ceron, Marcos Speroni;Lucca, Walter;Zanella, Irineo;de Oliveira, Vladimir
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제29권11호
    • /
    • pp.1632-1638
    • /
    • 2016
  • A study was conducted to compare the endogenous basal losses of phosphorus (EBLP) in pigs fed diets containing gelatin (GEL) or spray-dried porcine plasma (SDPP) as protein sources and to determine the standardized total tract digestibility (STTD) of phosphorus (P) in SDPP. The trial was carried out at the Federal University of Santa Maria, Brazil. Twelve castrated pigs with an initial body weight of 55 kg were individually allotted in metabolic crates during two 12-day periods, each with 7 days of adaptation and 5 days of total fecal collection. The beginning and the end of the collecting periods were determined according to the marker-to-marker approach, using ferric oxide as an indigestible marker. Pigs were submitted to four semi-purified diets, one being a P-free diet with 30% of GEL as the protein source and three were diets with 10%, 20%, and 30% inclusion of SDPP respectively. Data were subjected to analysis of variance and the model included the effects of period, animal and treatments; the results of the three diets with increased levels of SDPP were subjected to linear regression analysis. The intercept of the relation of between ingested P and absorbed P represented the EBLP, while the slope indicated the STTD of P in SDPP. The EBLP means obtained by P-free diet and regression method were compared with the Student t test. The EBLP were 128.95 mg/kg dry matter intake (DMI) and 153.63 mg/kg DMI (standard error = 77.0; p<0.06) using the P-free diet with GEL as the protein source and the regression method, obtained with diets containing increased levels of SDPP, respectively. The apparent digestibility of P was 87.9%, 94.2%, and 92.9% for the treatments containing 10%, 20%, and 30% inclusion of SDPP, respectively. The estimated STTD of P obtained with the linear regression was 97.4%. When the EBLP estimated by the P-free diet was used to corrected the apparent digestibility of P in diets containing SDPP, the STTD of P in SDPP was 96.9%, 98.8%, and 95.9% for 10%, 20%, and 30% SDPP, respectively. Therefore, it can be concluded that SDPP can replace GEL to estimate the endogenous losses of P. In addition, the STTD of P in SDPP estimated with the P-free diet was 97.2% and it was 97.4% by the regression method, utilizing SDPP.

재수화능이 향상된 인스턴트 쌀 미음의 제조 (Development of Well-reconstituted Instantized Thin Rice Gruel)

  • 양승철;이인애;선주호;김동은;강위수;정하숙;신말식;고상훈
    • 산업식품공학
    • /
    • 제14권1호
    • /
    • pp.54-59
    • /
    • 2010
  • 본 연구에서는 영양과 건강, 그리고 편의성까지 고려한 즉석식품 형태의 쌀미음을 제조하였다. 제조된 쌀미음 분말의 영양성분 구성비를 일반성분 분석을 통하여 분석 하였고, 과립공정에 따른 재수화능의 향상을 연구하였다. 과립분말은 혼합분말보다 지방함량과 단백질 함량이 각각 0.9, 1.9% 높게 나타난 반면, 탄수화물 함량은 상대적으로 3.2% 낮게 나타났다. 과립분말의 단백질 조성은 71.1-118.5 g으로 1일 권장 단백질 섭취량 45-55 g보다 많았는데, 이는 일반적인 환자식이 지니는 공통적인 특성이다. 분말 입자의 침강 속도를 보여주는 분산성의 경우 과립분말(93.7%)은 혼합분말(77.0%) 보다 높게 나타났고, 재수화에 걸리는 시간도 과립분말(122.3 초)이 혼합분말(305.3 초)보다 빨랐으며 이들 결과는 과립공정이 분말의 재수화능을 향상시켜 주었음을 보여준다. 호화쌀가루를 이용한 쌀미음은 기존의 우유 단백질 위주의 환자식을 곡류로 대체하며 영양강화 쌀 가공제품의 개발에 의미가 있다.

다공성의 캐리어를 이용한 티카그렐러 함유 고형의 자가 나노유화 약물전달시스템 개발 (Development of Solid Self-nanoemulsifying Drug Delivery Systems of Ticagrelor Using Porous Carriers)

  • 최형주;김경수
    • 생명과학회지
    • /
    • 제31권5호
    • /
    • pp.502-510
    • /
    • 2021
  • 자가 나노유화 약물전달시스템(SNEDDS)은 오일, 계면활성제, 공계면활성제의 균질한 혼합물로서 가벼운 교반에 의해도 에멀전 형성이 가능하고 분산 시 200 nm 이하 범위의 입자 크기를 갖는 나노 에멀전을 형성하는 약물 수송체를 말한다. SNEDDS는 난용성이며 생체이용률이 낮은 소수성약물의 흡수율을 높일 수 있는 뛰어난 가용화 방법으로 알려져 있다. 본 연구에서는 난용성인 티카그렐러에 대한 용해도가 높은 유상으로 MCT oil과, 계면활성제로 Tween 80, 공계면활성제로 Labrafil M1944CS를 사용하여 SNEDDS를 개발하고, 분무건조기술을 이용하여 다양한 다공성의 캐리어에 흡착시켜 고형의 SNEDDS를 제조하였다. 제조된 고형의 SNEDDS에 대하여 물리화학적 특성 및 분말특성을 평가한 후 용출시험을 진행하였다. 본 연구를 통해 얻어진 다공성의 캐리어에 흡착시켜 만들어진 다양한 고형 SNEDDS에서 티카그렐러의 결정형은 무정형으로 변환된 것을 확인할 수 있었다. 또한 제조된 고형의 SNEDDS 조성물들은 모두 원료에 비하여 우수한 용출양상을 나타내는 것을 확인할 수 있었다. 특히 이산화규소를 통해 얻어진 고형의 SNEDDS 조성물의 입자크기와 다분산지수가 제일 작았으며 흐름성과 압축성도 제일 우수하였다. 따라서 이산화규소를 통해 얻어진 고형의 SNEDDS 조성물은 난용성인 티카그렐러의 경구 고형제제화 연구에 적합한 약물 전달 시스템인 것을 확인할 수 있었다.

불화수소에 대한 사고대응 정보시트 개발 (Development of Accident Response Information Sheets for Hydrogen Fluoride)

  • 윤영삼;박연신;김기준;조문식;황동건;윤준헌;최경희
    • 한국위험물학회지
    • /
    • 제2권1호
    • /
    • pp.18-26
    • /
    • 2014
  • We analyzed the demand of competent authorities requiring adequate technical information for initial investigation of chemical accidents. Reflecting technical reports on chemical accident response by environmental agencies in the U.S. and Canada, we presented information on environmental diffusion and toxic effects available for the first chemical accident response. Hydrogen fluoride may have the risk potential to corrode metals and cause serious burns and eye damages. In case of inhalation or intake, it could have severe health effects. The substance itself is inflammable, but once heated, it decomposes producing corrosive and toxic fume. In case of contact with water, it can produce toxic, corrosive, flammable or explosive gases and its solution, a strong acid, may react fiercely with a base. In case of hydrogen fluoride leak, the preventive measures are to decrease steam generation in exposed sites, prevent the transfer of vapor cloud and promptly respond using inflammable substances including calcium carbonate, sodium bicarbonate, ground limestone, dried soil, dry sand, vermiculite, fly ash and powder cement. The method for fire fighting is to suppress fire with manless hose stanchions or monitor nozzles by wearing the whole body protective clothing equipped with over-pressure self-contained breathing apparatus from distance. In case of transport accident accompanied with fire, evacuation distance is 1,600m radius. In cae of fire, fire suppression needs to be performed using dry chemicals, CO2, water spray, water fog, and alcohol-resistance foam, etc. The major symptoms by exposure route are dyspnoea, bronchitis, chemical pneumonia and pulmonary edema for respiration, skin laceration, dermatitis, burn, frostbite and erythema for eyes, and nausea, diarrhea, stomachache, and tissue destruction for digestive organs. In atmosphere, its persistency is low, and its bioaccumulation in aquatic organism is also low.