• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.8
• /
• pp.1552-1565
• /
• 1992

Three dimensional numerical calculations were carried out for two different combustion chambers with the offset valve in order to investigate the swirl and the squish effects on the flow fields. The modified K-.epsilon. turbulence model considering the change of the density under the condition of the rapid compression and expansion of the pistion was used. During the compression process, it was found that the squish flow which controls the subsequent combustion process was produced due to the piston bowl in the bowl piston type combustion chambers but not for the flat piston type. The swirl velocity close to the solid body rotation was maintained in the flat piston type combustion chambers, but for the bowl piston type a resulting from the change of the solid body rotation was generated in the radial-circumferential plane. For the swirl ratio effect, as the swirl ratio increases, it was found that a large and strong vortex was generated in the radial-circumferential plane of bowl piston type combustion chambers because of the strong inward flows from the combustion chamber wall. These computational results were compared with the results of LDA measurement.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.734-746
• /
• 2020

Purpose: Increase in the size and number of underpasses rises occurrence of disasters such as fire and flooding inundation in underpasses. In the occurrence of disasters, the underpasses are more vulnerable to expose of crucial disasters than the general roads due to they are built underground. Therefore, The purpose of this paper is to derive system improvement items to prevent and control disasters in underpasses. Method: A hierarchical model of disaster impact factors and alternatives was developed based on prior researches and expert advices on disaster analyses and impact factors in the underpasses. The developed model was employed for surveys of pairwise comparison, and rankings of improvement were determined by applying the AHP method. Result: With a consistency of the surveys, results of relative weights of evaluation criteria(traffic accidents, fire, flooding inundation) and alternatives(law, system/planning, maintenance/human factor/environment) shows that improvement of laws and system related to the fire disaster is a top priority to prevent and control disaster of the underpasses. Conclusion: From experts' point of view, strengthening laws and systems related to disater prevention facilities such as water spray facilities, external(ground) exit in relation to fire in underpasses showed that it is an alternative to prevent disasters and minimize damage to underpasses.

• Research in Plant Disease
• /
• v.26 no.4
• /
• pp.229-238
• /
• 2020

Field validation of PBcast, an infection risk model for Phytophthora blight of pepper, was conducted through a designed field experiment in 2012 and 2013. Conduciveness of weather conditions at 26 locations in Korea in 2014-2017 was also evaluated using PBcast. The PBcast estimated daily infection risk (IR) of Phytophthora capsici based on weather and soil texture data. In the designed filed experiment, four treatments including routine sprays at 7-day intervals (RTN7), forecast-based sprays when IR reached 200 (IR200) and 224 (IR224), and no spray (CTRL) were compared in terms of disease incidence and number of sprays recommended for disease control. In 2012, IR had reached over 200 twice, but never reached 224. In 2013, IR had reached over 200 three times and once higher than 224. The RTN7 plots were sprayed 17 and 18 times in 2012 and 2013, respectively. Weather conditions throughout the country were generally conducive for Phytophthora blight and 3-4 times of fungicide sprays would have been reduced if the PBcast forecast information was adopted in the decision-making for fungicide sprays. In conclusion, the PBcast forecast would be useful to reduce fungicide applications without losing the disease control efficacy to protect pepper crop from Phytophthora blight.

• Korean journal of applied entomology
• /
• v.42 no.1
• /
• pp.43-51
• /
• 2003

This study was carried out to develop the forecasting model of Pseudococcus comtocki Kuwana for timing spray. Field phonology and temperature-dependent development of p. comstocki were studied, and its stage transition models were developed. p comstocki occurred three generations a year in Suwon. The 1 st adults occurred during mid to late June, and the 2nd adults were abundant during mid to late August. The 3rd adults were observed after late October. The development times of each instar of p. comstocki decreased with increasing temperature up to 25$^{\circ}C$, and thereafter the development times increased. The estimated low-threshold temperatures were 14.5, 8.4, 10.2, 11.8, and 10.1$^{\circ}C$ for eggs, 1st+2nd nymphs, 3rd nymphs, preoviposition, and 1st nymphs to preoviposition, respectively. The degree-days (thermal constants) for completion of each instar development were 105 DD for egg,315 DD for 1st+2nd nymph, 143 DD for 3rd nymph, 143 DD for preoviposition, and 599 DD for 1 st nymph to preoviposition. The stage transition models of p. comstocki, which simulate the proportion of individuals shifted from a stage to the next stage, were constructed using the modified Sharpe and DeMichele model and the Weibull function. In field validation, degree-day models using mean-minus-base, sine wave, and rectangle method showed 2-3d, 1-7d, and 0-6 d deviation with actual data in predicting the peak oviposition time of the 1st and 2nd generation adults, respectively. The rate summation model, in which daily development rates estimated by biophysical model of Sharpe and DeMichele were accumulated, showed 1-2 d deviation with actual data at the same phonology predictions.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.449-455
• /
• 2010

'Moulinrouge' was selected as the best regenerating cultivar among 18 different spray-type chrysanthemum cultivars bred in the Gyeongnam Flowers Breeding Research Institute. When the leaf explants from standard- and spray-type chrysanthemum 'Jinba' and 'Moulinrouge' were incubated on MS basal medium supplemented with $0.5mg{\cdot}L^{-1}$ BA and $1.0mg{\cdot}L^{-1}$ NAA, both 'Jinba' and 'Moulinrouge' induced adventitious shoots that can be regenerated into plantlets. Based on these regeneration conditions, we developed an efficient $Agrobacterium$-mediated chrysanthemum 'Moulinrouge' transformation method by using sequential selection of shoots from low ($10mg{\cdot}L^{-1}$) to high ($30mg{\cdot}L^{-1}$) concentrations of kanamycin after co-cultivation of leaf explants with $Agrobacterium$ for 10 days and induction of shoots. All kanamycin resistant plants investigated with genomic PCR analysis carried the report gene, $AtSICKLE$, in their genome. Although expression levels of the report gene in the transgenic plants investigated with RT-PCR were relatively low because of inefficiency of CaMV 35S promoter in chrysanthemum, transgenic lines expressing $AtSICKLE$ efficiently showed leaf epinasty phenotype. We expect that our results will provide a useful method that can perform a high-throughput investigation of genes isolated and studied well in model plants for molecular breeding of chrysanthemum.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.376-383
• /
• 2022

The current study, which consisted of two independent studies (laboratory and greenhouse), was carried out to project the hypothesis fungi-spray scheduling for leaf mold and gray leaf spot in tomato, as well as to evaluate the effect of temperature and leaf wet duration on the effectiveness of different fungicides against these diseases. In the first experiment, tomato leaves were infected with 1 × 10⁴ conidia·mL^-1 and put in a dew chamber for 0 to 18 hours at 10 to 25℃ (Fulvia fulva) and 10 to 30℃ (Stemphylium lycopersici). In farm study, tomato plants were treated for 240 hours with diluted (1,000 times) 30% trimidazole, 50% polyoxin B, and 40% iminoctadine tris (Belkut) for protection of leaf mold, and 10% etridiazole + 55% thiophanate-methyl (Gajiran), and 15% tribasic copper sulfate (Sebinna) for protection of gray leaf spot. In laboratory test, leaf condensation on the leaves of tomato plants were emerged after 9 hrs. of incubation. In conclusion, the incidence degree of leaf mold and gray leaf spot disease on tomato plants shows that it is very closely related to formation of leaf condensation, therefore the incidence of leaf mold was greater at 20 and 15℃, while 25 and 20℃ enhanced the incidence of gray leaf spot. The incidence of leaf mold and gray leaf spot developed 20 days after inoculation, and the latency period was estimated to be 14-15 days. Trihumin fungicide had the maximum effectiveness up to 168 hours of fungicides at 12 hours of wet duration in leaf mold, whereas Gajiran fungicide had the highest control (93%) against gray leaf spot up to 144 hours. All the chemicals showed an around 30-50% decrease in effectiveness after 240 hours of treatment. The model predictions in present study could be help in timely, effective and ecofriendly management of leaf mold disease in tomato.

• Korean journal of applied entomology
• /
• v.51 no.4
• /
• pp.421-429
• /
• 2012

The developmental time period of Aphis gossypii was studied in laboratory (six constant temperatures from 15 to $30^{\circ}C$ with 50~60% RH, and a photoperiod of 14L:10D) and in a cucumber plastic house. The mortality of A. gossypii in the laboratory was high in the 2nd (20.0%) and 3rd stage(13.3%) at low temperature but high in the 3rd (26.7%) and 4th stage (33.3%) at high temperatures. Mortality in the plastic house was high in the 1st and 2nd stage but there was no mortality in the 4th stage at low temperature. The total developmental period was longest at $15^{\circ}C$ (12.2 days) in the laboratory and shortest at $28.5^{\circ}C$ (4.09 days) in the plastic house. The lower threshold temperature at the total nymphal stage was $6.8^{\circ}C$ in laboratory. The thermal constant required to reach the total nymphal stage was 111.1DD. The relationship between the developmental rate and temperature fit the nonlinear model of Logan-6 which has the lowest value for the Akaike information criterion(AIC) and Bayesian information criterion(BIC). The distribution of completion of each development stage was well described by the 3-parameter Weibull function ($r^2=0.89{\sim}0.96$). This model accurately described the predicted and observed outcomes. Thus it is considered that the model can be used for predicting the optimal spray time for Aphis gossypii.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.18 no.1
• /
• pp.116-134
• /
• 2005

Although the parallel prescription of Sopoongsangagambang (SG) administration along with external treatment such as spraying or ointment application on the skin is clinically used for the treatment of atopic dermatitis (AD), molecular mechanism underlying its effectiveness is unknown. Thus in the present study, diverse immune responses in terms of chemical mediators related to AD were investigated using an atopic mouse model NC/Nga after SG administration and external treatment (ET), and major findings are summarized as follows. 1. The clinical severities in 16 and 20 week old NC/Nga mice with SG and ET treatment were decreased to 72.2% and 62.3% respectively compared to the control NC/Nga mice with no drug treatment. 2. IgE, IL-4, IL-5, IL-6, IL-13, IgM, IgG1 and IgG2a levels in the serum of SG and ET treated NC/Nga mouse group were significantly decreased compared to the untreated control mice. In contrast, $IFN-{\gamma}$ showed a significant increase in the experimental group compared to the untreated control group. 3. The spleen weight of SG and ET treated NC/Nga mice was significantly decreased compared to the untreated control group. 4. The B/T ratio in the lymph node of SG and ET treated NC/Nga mice was increased compared to the untreated control group. $CD4^+\;and\;CD8^+$ cell numbers in the lymph node of SG and ET treated NC/Nga mice were significantly increased compared to the untreated control group, but $CD69^+\;and\;CD11a^+$ cells were significantly decreased. 5. mRNA expression levels of IL-4, IL-5, and CCR3 in the skin tissues of SG and ET treated NC/Nga mice were significantly decreased, and expression levels of IL-6, IL-13, $CD69^+/CD3{\varepsilon}^+\;and\;CD19^+/CD44^+$ in the skin tissues of SG and ET treated NC/Mga mice were significantly decreased compared to the untreated control group. $IFN-{\gamma}$ mRNA expression levels were increased compared to the untreated control group. 6. Histological observation of the ear and neck skin tissues showed that the extents of inflammation and infiltrated immune cells in the epidermis and dermis of SG and ET treated NC/Nga mice were highly reduced compared to the untreated control group. 7. Lymphokine assay showed a significant decrease in IL-4 levels in SG and ET treated NC/Nga mice compared to the untreated control group, but the levels of $IFN-{\gamma}$ secretion were significantly increased drug treated NC/Nga mice.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.11
• /
• pp.1632-1638
• /
• 2016

A study was conducted to compare the endogenous basal losses of phosphorus (EBLP) in pigs fed diets containing gelatin (GEL) or spray-dried porcine plasma (SDPP) as protein sources and to determine the standardized total tract digestibility (STTD) of phosphorus (P) in SDPP. The trial was carried out at the Federal University of Santa Maria, Brazil. Twelve castrated pigs with an initial body weight of 55 kg were individually allotted in metabolic crates during two 12-day periods, each with 7 days of adaptation and 5 days of total fecal collection. The beginning and the end of the collecting periods were determined according to the marker-to-marker approach, using ferric oxide as an indigestible marker. Pigs were submitted to four semi-purified diets, one being a P-free diet with 30% of GEL as the protein source and three were diets with 10%, 20%, and 30% inclusion of SDPP respectively. Data were subjected to analysis of variance and the model included the effects of period, animal and treatments; the results of the three diets with increased levels of SDPP were subjected to linear regression analysis. The intercept of the relation of between ingested P and absorbed P represented the EBLP, while the slope indicated the STTD of P in SDPP. The EBLP means obtained by P-free diet and regression method were compared with the Student t test. The EBLP were 128.95 mg/kg dry matter intake (DMI) and 153.63 mg/kg DMI (standard error = 77.0; p<0.06) using the P-free diet with GEL as the protein source and the regression method, obtained with diets containing increased levels of SDPP, respectively. The apparent digestibility of P was 87.9%, 94.2%, and 92.9% for the treatments containing 10%, 20%, and 30% inclusion of SDPP, respectively. The estimated STTD of P obtained with the linear regression was 97.4%. When the EBLP estimated by the P-free diet was used to corrected the apparent digestibility of P in diets containing SDPP, the STTD of P in SDPP was 96.9%, 98.8%, and 95.9% for 10%, 20%, and 30% SDPP, respectively. Therefore, it can be concluded that SDPP can replace GEL to estimate the endogenous losses of P. In addition, the STTD of P in SDPP estimated with the P-free diet was 97.2% and it was 97.4% by the regression method, utilizing SDPP.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.91-99
• /
• 2014

The common-rail injectors are the most critical component of the CRDI diesel engines that dominantly affect engine performances through high pressure injection with exact control. Thus, from now on the advanced combustion technologies for common-rail diesel injection engine require high performance fuel injectors. Accordingly, the previous studies on the numerical and experimental analysis of the diesel injector have focused on a optimum geometry to induce proper injection rate. In this study, computational predictions of performance of the diesel injector have been performed to evaluate internal flow characteristics for various needle lift and the spray pattern at the nozzle exit. To our knowledge, three-dimensional computational fluid dynamics (CFD) model of the internal flow passage of an entire injector duct including injection and return routes has never been studied. In this study, major design parameters concerning internal routes in the injector are optimized by using a CFD analysis and Response Surface Method (RSM). The computational prediction of the internal flow characteristics of the common-rail diesel injector was carried out by using STAR-CCM+7.06 code. In this work, computations were carried out under the assumption that the internal flow passage is a steady-state condition at the maximum needle lift. The design parameters are optimized by using the L16 orthogonal array and polynomial regression, local-approximation characteristics of RSM. Meanwhile, the optimum values are confirmed to be valid in 95% confidence and 5% significance level through analysis of variance (ANOVA). In addition, optimal design and prototype design were confirmed by calculating the injection quantities, resulting in the improvement of the injection performance by more than 54%.