• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.223-229
• /
• 2011

In this study, two types of LED spot light with the development of the current broadcast studio-light is installed in the space being used in many products, companies in the UK Arri-650W, 1000W Fresnel spot light and illumination, color temperature and color rendering comparison of data measured compared with the target of the shooting and the color rendition on images was measured by comparing the color. In the future, broadcast - shooting LED spot light replacing whether the available studies on the performance evaluation were analyzed. Experimental evaluation of a replacement for halogen lights in LED Spot light is potential was confirmed.

• Journal of Sensor Science and Technology
• /
• v.27 no.4
• /
• pp.216-220
• /
• 2018

In this paper, we present visual sensing techniques that can be used to teach a robot using a laser pointer. The light spot of an off-the-shelf laser pointer is detected and its movement is tracked on consecutive images of a camera. The three-dimensional position of the spot is calculated using stereo cameras. The light spot on the image is detected based on its color, brightness, and shape. The detection results in a binary image, and morphological processing steps are performed on the image to refine the detection. The movement of the laser spot is measured using two methods. The first is a simple method of specifying the region of interest (ROI) centered at the current location of the light spot and finding the spot within the ROI on the next image. It is assumed that the movement of the spot is not large on two consecutive images. The second method is using a Kalman filter, which has been widely employed in trajectory estimation problems. In our simulation study of various cases, Kalman filtering shows better results mostly. However, there is a problem of fitting the system model of the filter to the pattern of the spot movement.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.6
• /
• pp.440-444
• /
• 2011

We have analyzed electrical characteristics of spot light solar cell modules and have completed fabrication of spot light solar cell modules. Before we test modules, we have carried about UV test of hologram. As a result of test, we have obtained 165% efficiency of hologram film. the other hand, we obtained 75% efficiency of general films. After we have fabricated solar modules and carried about field test, spot light solar cell modules with hologram have been investigated 17.3 A of Isc and 155.4 W of power.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.2
• /
• pp.21-25
• /
• 2008

A CCFL which commonly used in the back light units for the LCD, possess very high brightness hence, was widely used as a line light source. However, the use of CCFL, caused for several environmental concerns since it contain highly toxic mercury, gradually replaced into a LED. But the LED is a spot light source, the dark area occurs in the surface of the back light units. In this paper, we proposed the lens that can convert the spot light into the line light and it can remove the dark area in the surface of the back light units. The lens is composed with the light condensation part and the light guiding part. The conditions obtained will be helpful to plan an optimum structure for such preparation.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.143.1-143.1
• /
• 2012

We attempt to investigate the main reason of the asymmetrical light curves of contact and near-contact eclipsing binary base on the hypothesis that cool spot was produced on late type star while hot spot was produced from transferred material from their companion star hitting surface. We select 7 eclipsing binary systems which showed asymmetric light curves and mass transfer. Period variation and mass transfer rate were obtained from O-C diagram. Radial velocity curves and light curves of those 7 eclipsing binary system were adopted from available literature in order to obtain the absolute dimension. For four contact eclipsing binary system (AD Phe, EZ Hya, AG Vir and VW Boo), their component stars belonged to spectral type G to K was fitted by cool spot model. While the other two near-contact systems (RT Scl and V1010 Oph) and one contact system (SV Cen) was fitted by cool spot model. The densities of the materials are adopted from stellar model which calculate by stellar structure code. The calculated spot temperature turns out to agree with the photometric solution but there are no correlate between period variation rate and type of spot.

• Journal of Astronomy and Space Sciences
• /
• v.20 no.2
• /
• pp.123-132
• /
• 2003

We performed CCD photometric observations of the W-type contact binary AB And for 10 nights from November 1995 to December 1999 using the 61-cm reflector and BVR filters at Sobaeksan Optical Astronomy Observatory. From our observations, the seasonal light curves of AB And for 1995, 1996 and 1999 were completed and 8 new times of minimum light were determined. Newly obtained light curves show that strong light variations occurred in AB And during the past five years. We adopted the 1996 light curves as reference ones and obtained the photometric solutions of them with contact mode in the Wilson-Devinney binary code. Assuming such light variations were produced by the existence of a star spot (or star spots) in the analysis, we derived the system parameters and analyzed the 1995 and 1999 light curves by adjusting only the spot parameters. As the results, we interpreted that those light variations are produced by the simultaneous existence of a hot spot and a cool spot on the secondary. We could infer that the hot spot on the secondary is produced due to mass exchange between the components suggested by Lee (1999).

• Journal of Astronomy and Space Sciences
• /
• v.13 no.1
• /
• pp.19-31
• /
• 1996

We have analyzed collected photoelectric light curves for light variations of SW Lac. The method of Fourier analysis was adopted to quantify the light variation from season to season. We found the linear relation between the Fourier coefficient, B1 and the magnitude difference between two maxima. The total light of the system has been decreased as much as 0m.04 during approxiamately 20 years time interval. Photoelectric parameters including spot parameters for all light curves were obtained by the method of the Wilson and Devinney differential correction in order to secure the variations of parameters from season to season. SW Lac, not like RS CVn type stars, required to adjust all parameters as well as spot parameters for a reasonable fit to the observations of each epoch. A surface temperature of cooler star is one of the most sensitive parameters to affect a shape of light curve of SW Lac. We conclude that the shape of light curve of SW Lac varies even during one season as well as season to season. The light curve is mainly caused by inhomogeneous surface temperature due to strong chromospheric activity of the system.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1115-1120
• /
• 2003

The recent tendency in the automobile industries is toward light weighting vehicle body to improve the problems by environmental pollution as well as improving fuel cost. The effective way to reduce the weight of vehicle body seems to be application of new materials for body structure and such trend is remarkable. Among the various materials for vehicle body, stainless steel sheet (for example, 301L and 304L), TRIP steel and cold rolled steel sheets are under the interests. However, in order to guarantee reliability of new material and to establish the long life design criteria of body structure, it is important and require condition to assess spot weldability of them and fatigue strength of spot welded lap joints which were fabricated under optimized spot welding condition. And, recently, a new issue in the design of the spot welded structure is to predict economically fatigue design criterion without additional fatigue tests. In general, for fatigue design of the spot-welded thin sheet structure, additional fatigue tests according to the welding condition, material, joint type, and fatigue loading condition are generally required. This indicates that much cost and time for it should be consumed. Therefore, in this paper, the maximum stresses at nugget edge of spot weld were calculated through nonlinear finite element analysis first. And next, obtained the ${\Delta}P-N_{f}$ relation through the actual fatigue tests on spot welded lap joints of similar and dissimilar high strength steel sheets. And then, the ${\Delta}P-N_{f}$ relation was rearranged in the ${\Delta}{\sigma}-N_{f}$ relation. From this ${\Delta}{\sigma}-N_{f}$ relation, developed the fatigue design technology for spot welded lap joints of them welded using the optimized welding conditions.

• Journal of Astronomy and Space Sciences
• /
• v.5 no.2
• /
• pp.97-109
• /
• 1988

The photometric behaviour of XY U Ma, an eclipsing binary showing photospheric and chromospheric activity, has been described by spot hypothesis. They are based on the all the available UBV light curves, which were carried out by Geyer since 1955. A "spherical rectangular" spot model shows very pronounced spot activities during the last 30 years. On the average, the spot covered about 16% of the visible hemisphere. Observational evidence for photospheric and chromospheric activities on the XY UMa and related systems are also discussed.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.63.3-64
• /
• 2017

KIC6118779 is an over-contact binary system having a short orbital period of about 0.36 days. The photometric data for this system are acquired by the observations of Kepler mission in the long cadence mode having a time resolution of about 30 minutes. It means that the Kepler light curves of the system may be strongly affected by phase smearing effect and the analysis of them without consideration of the phase smearing effect may result in wrong stellar properties. Additionally, this system also shows dynamical variation of light curve resulting from spot activity. For all those reasons, it is difficult to investigate KIC6118779, and the investigation should be carried out carefully. In this presentation, we introduce the phase smearing effect and carry out the light curve modeling with the 2015 version of the Wilson-Devinney binary code considering the phase smearing effect. Our results show that the system is a deep over contact binary system and has extremely low mass ratio of about 0.12. Moreover our spot modeling implies the cyclic migration of a big cool spot on the massive component.