• Korean Journal of Optics and Photonics
• /
• v.22 no.2
• /
• pp.96-101
• /
• 2011

Operational and thermal characteristics of a thin disk Yb:YAG crystal with a thickness of 0.8 mm were studied using as a pumping source a fiber-coupled 930 nm laser diode. The heat generated in the crystal was dissipated by placing both surfaces in contact with copper plates with central hole, and the dependence of the temperature change in the illuminated spot on hole size was investigated by measuring the spectral change of the lasing peaks. The slope efficiency and optical-to-optical efficiency with respect to the LD pump power were as high as 42.2% and 34.8%, respectively. The temperature at the illuminated spot increased with diode current and with increasing hole size of the copper plate. When the hole size considerably exceeded the crystal thickness, the temperature rise deviated from the linear increase at high pump power.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.1
• /
• pp.43-50
• /
• 2012

The effects of parameters related to the finite element simulation of the laser shock peening(LSP) process on the residual stresses of Inconel alloy 600 steel are discussed. In particular, we focus on the maximum pressure, pressure pulse duration, laser spot size, and number of shots. It is found that certain ranges of the maximum pressure and pulse duration can produce the maximum compressive residual stresses near the surface, and thus proper choices of these parameters are important. The residual stresses are not affected by the laser spot size, provided it is larger than a certain size. The magnitudes of the compressive residual stresses and the plastically affected depths are found to increase with an increasing number of shots, but this effect is less pronounced for more shots.

• The Journal of Fisheries Business Administration
• /
• v.42 no.2
• /
• pp.31-45
• /
• 2011

Costal fisheries use small boat. The boats are frequently substituted with newly made boat or proper boat. When the boat which is substituted with another one after the fixed date for compensation is estimated for fisheries loss by public project, it is matter that which boat is the object for estimating average catch of fish. There are three ways in practical business. They are based on the date of spot probe, the date of conference for compensation and fixed date for compensation. In case of applying the first and the second ways, as the object of compensation is not fixed, there is problem that estimated result can be changed depending on changing boat tons even after the date of spot probe and the fixed date for compensation. Most of all, these ways are against Attached Form No.4 of the Enforcement Ordinance of Fisheries Law which regulate to calculate average catch of fish applying result of fishery for retroactively counted 3 years from the year before the year in which administrative measure day is. The other side, in applying boat tons based on the fixed date for compensation, estimated result of compensation will not change even boat substituted after the fixed date for compensation. Even though applying tons based on the fixed date for compensation, a problem still remains. If the boat get bigger after the fixed date for compensation, the then boat size must be applied for calculating average catch. But the boat get smaller, the changed boat size must be applied. Because changed small boat would be damaged less than the previous boat. And decrease in catch by changing boat into small one is not due to the project but due to the personal responsibility. This will help to increase objectivity and reliance on the compensation result. As the other objects are fixed based on the fixed date for compensation in the Act on Acquisition and Compensation of Land and Others for Public Project, it can be balanced with other object.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.711-714
• /
• 2010

A new cultivar 'Daemang' ($Hibiscus$ hybrid 'Daemang') originated from the interspecific cross between $Hibiscus$ $sinosyriacus$ 'Seobong' and $Hibiscus$ $syriacus$ 'Namwon' to improve the flower quality in 2001. 'Daemang' was preliminarily selected as 'R-143' in 2003 for its stable flower quality with long red eye spot and named in 2006. The tree habit shows vigorous growth and is upright, so it can be used as a specimen tree or street tree. Characteristic tests such as leaf shape, leaf size, flower characteristics, flowering, and capsule size were conducted from 2004 to 2006. The characteristics succeed after grafting. 'Daemang' had pink color flower with red eye spot. The width of flower is 15.2 cm. Petal length and width are 8.0 cm and 6.4 cm, respectively. Leaves are 9.49 cm long and 8.72 cm wide. After the plant characteristics evaluation for 3 years (2004~2006), it was registered as a variety 'Daemang' in 2008.

• Journal of the Korean Magnetics Society
• /
• v.25 no.2
• /
• pp.52-57
• /
• 2015

The focal spot of electron beam depending on the anode angle in the structure and major parts of the X-ray tube was investigated by the OPERA-3D/SCALAR simulation program. The simulation worked on four spaces with with two spaces, including anode and cathode of X-ray tube, by applying the finite element method analysis. The analytical model and dimension for the emission orbit of thermal electrons made from one filament of the focused X-ray cathode is affected to the penumbra of detector for the X-ray depending on any real focal spot size. The model shape of focusing cap and focusing tube with an anode target angle and a cathode filament is analyzed by the current density distribution of thermal electrons. The focusing width of thermal electrons for the X-ray tube depended on the anode angle (${\theta}$). The focusing value of electron beams at a region of anode angle having $10^{\circ}{\sim}17^{\circ}$ maintained to below value of $70{\mu}m$. The minimum focal size of the electron beam was $40{\mu}m$ at an anode angle of $15^{\circ}$. The focused X-ray tube of many variables depended on the thermionic emission of hot electrons from the target trajectory. The focusing tube will contribute to the real design of X-ray for the development of future diagnosis medical device.

• Journal of Welding and Joining
• /
• v.14 no.1
• /
• pp.82-91
• /
• 1996

The maximum butt-joint gap size in $CO_2$ laser beam welding of SAPH steel plates with different thicknesses and its bending formability were studied. In the range of the gap size$\geq$0.1mm, the optimal butt welding speed was faster than that of no gap (air gap) condition. This behaviour was independent on the difference of thickness at any combination. Also, the allowable gap size in steel plates with different thicknesses was larger than with same thicknesses. In the range of $T/T_0$(bead shape) $\geq$ 0.8, good bending formability was obtained at any combination of thickness. The formability was improved by reducing the hardness in weld bead using pre-heating process. Finally, FEM result of the laser beam welded underframe with different thicknesses was compared to that of the conventional spot welded underframe.

• Korean Journal of Optics and Photonics
• /
• v.19 no.2
• /
• pp.87-94
• /
• 2008

We present a new design for an endoscope objective lens composed of a lexible fiber bundle with 30,000 core, and a gradient-index (GRIN) objective lens with an optical adaptor. The characteristic of this objective lens is to be minimally-invasive to be able to insert easily in the internal organs of live animals. The GRIN lens has a small diameter and a very simple construction, which is selected with the diameter of 1.0 mm and numerical aperture of 0.5 to achieve a minimally-invasive outer diameter and a high resolution. The resultant designed lens shows the performance as follows; a lateral resolution of 1.63 um and diameters of 100% encircled energy of $0.3\;{\mu}m$ and $0.83\;{\mu}m$ for the on-axis and the off-axis image point, respectively. Also, we can present a cheap solution with a lateral resolution of 1.74 um and diameters of 100% encircled energy of $1.10\;{\mu}m$ and $2.84\;{\mu}m$ for the on-axis and the off-axis image point, respectively.

• Journal of Korea Port Economic Association
• /
• v.36 no.4
• /
• pp.17-30
• /
• 2020

In the shipping industry, it is essential to engage in the preemptive prediction of freight rate volatility through market monitoring. Considering that freight rates have already started to fall, the loss of shipping companies will soon be uncontrollable. Therefore, in this study, factors affecting the freight rates of bulk carriers, which have relatively large freight rate volatility as compared to container freight rates, were quantified and analyzed. In doing so, we intended to contribute to future shipping market monitoring. We performed an analysis using a vector error correction model and estimated the influence of six independent variables on the charter rates of bulk carriers by Handy Size, Supramax, Panamax, and Cape Size. The six independent variables included the bulk carrier fleet volume, iron ore traffic volume, ribo interest rate, bunker oil price, and Euro-Dollar exchange rate. The dependent variables were handy size (32,000 DWT) spot charter rates, Supramax 6 T/C average charter rates, Pana Max (75,000 DWT) spot charter, and Cape Size (170,000 DWT) spot charter. The study examined charter rates by size of bulk carriers, which was different from studies on existing specific types of ships or fares in oil tankers and chemical carriers other than bulk carriers. Findings revealed that influencing factors differed for each ship size. The Libo interest rate had a significant effect on all four ship types, and the iron ore traffic volume had a significant effect on three ship types. The Ribo rate showed a negative (-) relationship with Handy Size, Supramax, Panamax, and Cape Size. Iron ore traffic influenced three types of linearity, except for Panamax. The size of shipping companies differed depending on their characteristics. These findings are expected to contribute to the establishment of a management strategy for shipping companies by analyzing the factors influencing changes in the freight rates of charterers, which have a profound effect on the management performance of shipping companies.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1160-1163
• /
• 2003

The effects of time delay between a video signal and a current signal applied to velocity modulation coil on free-spot movement and beam size were measured and analyzed quantitatively in this study. The result shows that it is the most important to avoid signal mismatching in order to achieve the optimal velocity modulation performance.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.280-281
• /
• 2000

Internet사용자의 급격한 증가에 따라 저가격이며 대용량의 optical access network의 구축이 시급한 실정이다. 광통신의 infrastructure를 구성하기 위해서는 광모듈의 저가격화가 가장 시급한 문제이다. 광모드 변환기가 집적된 반도체 레이저(SSC-LD)는 단일모드광섬유와의 광결합 손실 및 정렬허용오차, 동작시간, 광출력 등을 향상시킬 수 있어, 광가입자계 광송수신모듈의 가격을 낮출 수 있어 최근 매우 활발히 연구되고 있다. (중략)