• 한국환경복원기술학회지
• /
• 제10권6호
• /
• pp.130-138
• /
• 2007

To protect the surface of ground-cutting slopes occurring at the national road substitute detour [roundabout road]construction jobsite between Munduk and Wubokgu within the jurisdiction of Pohang-si and environment-friendly road construction, a test execution of re-vegetation measures on the major slopes was done and the results are as follows : As a result of finding out the number of sprouting individuals on the test construction site, the average number of sprouting individuals on the three test spots by the method of revegetation measures D, revegetation measures A, and revegetation measures B was 1,292 number of per square meter, 1,190 number of per square meter, and 1,095 number of per square meter respectively, which statistics were higher than those of test spot by the revegetation measures C. As a result of finding out living plant's breeding index [weight in dried state], the average dried weight of living plant at the test spot by the method of revegetation measures B, in case of foreign herbal species, was the highest marking 8.96 grams per square meter, and the next was 6.86grams per square meter by the method of revegetation measures D, and the next after was 6.80 grams per square meter by the method of revegetation measures A, and the last 5.93 grams per square meter by the method of revegetation measures C. As a result of finding out the covering degree on the slopes, the same average covering degree of 80% and 77.5% in revegetation measures A and revegetation measures D individually, which showed a somewhat higher covering degree than those of revegetation measures B and revegetation measures C. As a result of finding out appearing plants on the test construction site, seeding plant life was found to be sprouting on all test spot while native and foreign herbal species and herbaceous plant as well as shrubs were growing in good harmony with each other. However, in case of revegetation measures B and revegetation measures C method, foreign plant species are dominantly growing. As a result of inspecting rifts on the slopes and the excavated state by water, there existed cracks in some of base materials only in revegetation measures C method applied spot.

• 조명전기설비학회논문지
• /
• 제22권9호
• /
• pp.103-110
• /
• 2008

전기안전 측면에서 전기설비의 환경영향을 평가하고 국내규정에 맞도록 개선하기 위한 검토가 필요하다. 본 논문은 분진발생지역에서 현장실측과 분석을 통해 위험성을 평가하였다. 분진은 절연재료 표면에 부착되어 사고의 원인이 된다. 분진에 의한 전기사고의 메커니즘에 있어서 분진이 전기설비에 쌓이던, 누설전류가 흐르고, 표면이 탄화된다. 이후 줄열에 의해 전기화재가 발생한다. 실태조사결과, 보호 장치 또는 분전함에서 분진이 발견되었으며, 포집된 분진은 포집량과 도전율이 각각 달랐다. ICP-AES에 있어서 대체로 나트륨성분이 검출되었고 고무재생공장의 경우에는 아연과 칼슘성분이 검출되었다. 하수처리장에서는 나트륨, 마그네슘, 철, 칼슘, 알루미늄 등의 성분이 검출되었다. 따라서, 현장실측과 분진의 분석은 분진발생지역에서의 전기적 위험성 평가의 중요한 자료가 될 것이다.

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.156-162
• /
• 2013

This paper measures the hot spot temperatures in a single-phase, 154 kV, 15/20 MVA power transformer filled with natural ester fluid using optical fiber sensors and compares them with those calculated by conventional heat run tests. A total of 14 optical fiber sensors were installed on the high-voltage and low-voltage windings to measure the hot spot temperatures. In addition, three thermocouples were installed in the transformer to measure the temperature distribution during the heat run tests. In the low-voltage winding, the hot spot temperature was $108.4^{\circ}C$, calculated by the conventional heat run test. However, the hot spot temperature measured using the optical fiber sensor was $129.4^{\circ}C$ between turns 2 and 3 on the upper side of the low-voltage winding. Therefore, the hot spot temperature of the low-voltage winding measured using the optical fiber sensor was $21.0^{\circ}C$ higher than that calculated by the conventional heat run test.

• Journal of Electrical Engineering and Technology
• /
• 제7권3호
• /
• pp.312-319
• /
• 2012

The life of a power transformer is dependent on the life of the cellulose paper, which influenced by the hot spot temperature. Thus, the determination of the cellulose paper's life requires identifying the hot spot temperature of the transformer. Currently, however, the power transformer uses a heat run test is used in the factory test to measure top liquid temperature rise and average winding temperature rise, which is specified in its specification. The hot spot temperature is calculated by the winding resistance detected during the heat run test. This paper measures the hot spot temperature in the single-phase, 154kV, 15/20MVA power transformer by the optical fiber sensors and compares the value with the hot spot temperature calculated by the conventional heat run test in the factory test. To measure the hot spot temperature, ten optical fiber sensors were installed on both the high and low voltage winding; and the temperature distribution during the heat run test, three thermocouples were installed. The hot spot temperature shown in the heat run test was $92.6^{\circ}C$ on the low voltage winding. However, the hot spot temperature as measured by the optical fiber sensor appeared between turn 2 and turn 3 on the upper side of the low voltage winding, recording $105.9^{\circ}C$. The hot spot temperature of the low voltage winding as measured by the optical fiber sensor was $13.3^{\circ}C$ higher than the hot spot temperature calculated by the heat run test. Therefore, the hot spot factor (H) in IEC 60076-2 appeared to be 2.0.

• 한방안이비인후피부과학회지
• /
• 제13권2호
• /
• pp.200-210
• /
• 2000

objective to ascertain whether the concept of the therapeutic side is associated with changes in the blind sport mapping that represents the brain function. design Physiological blind spot maps were used as an integer of brain activity before and after acupuncture needling on the meridian point Hapkok(合谷) and Techung(太衝) in the unilateral side decided by double-blind controlled study(20 subjects). setting outpatient clinic participants: adult volunteers intervention twenty subjects were divided into two comparative groups and underwent specific acupuncture therapy on the unilateral side. Blinded examiners obtained reproducible pre and post-acupuncture cortical maps, which were subjected to statistical analysis. main outcome measures Brain activity was demonstrated by reproducible circumferential measurements of cortical hemispheric blind spot maps before and after acupuncture on the unilateral side. in case of acupuncture needling on the ipsilateral side of an enlarged side of bilnd spot, there were reduction of blind spot in 7 cases of 10 subjects, and enlargement in 3 cases. in case of acupuncture needling on the contralateral side of the enlarged side of blind spot, there were enlargement of blind spot in 6 cases of 10 subjects, and reduction in 4 cases. results the significant changes in the blind spots before and after acupuncture were observed Acupuncture needlings on the ipsilateral or contralateral side of an enlarged cortical map were associated with the concept of the therapeutic side traditionally accepted in the oriental medical society. Acupuncture needling on the ipsilateral side of an enlarged blind spot map is associated with the reduction of map, and increaed contralateral cortical activity. Acupuncture needling on the side opposite an enlarged blind spot map is associated with the enlargement of map, and decreased cortical activity. conclusion Reproducible maps of cortical responses can be used to measure the neurological consequences of acupuncture needling. Acupuncture can affect the somatic sensory informations that reach to the contralateral thalamus, and so affect thalamic integration. we found that acupuncture therapy may be associated with an increase or a decrease in brain function depending on the side of acupuncture needling. thus, the traditional concept of the contralateral therapeutic theory in acupuncture approach has the clinical significance in the view of brain function.

• 한국조리학회지
• /
• 제23권2호
• /
• pp.126-134
• /
• 2017

본 연구의 목적은 우리나라 돈육 선물시장이 현물시장에 대해 가격발견기능을 제대로 수행하고 있는지를 알아보는 것이다. 이러한 분석을 위해 2011년 1월 5일부터 2012년 12월 28일까지 자료가 사용되었다. 연구의 주요 결과는 다음과 같다. 첫째, 돈육 선물과 현물가격은 장기적으로 균형관계가 존재하는 것으로 나타났다. 둘째, 오차수정모형의 오차수정계수를 이용한 분석에서는 돈육 선물시장이 현물시장에 대해 가격발견기능의 역할을 주도적으로 수행하는 것으로 나타났다. 셋째, Gonzalo와 Granger(1995)와 Hasbrouck(1995)가 제시한 방법론에 따라 GG 정보비율과 Hasbrouck 정보비율 분석에 의하면 우리나라의 돈육 선물시장은 현물시장에 대해 가격발견에 있어서 강하지는 않지만, 어느 정도 우월한 역할을 하고 있는 것으로 나타났다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.509-512
• /
• 2008

The objectives of the on-the-spot inspection in Honam district are to find out the situation of the damages on facilities and the reason of the damages caused by heavy snow, and to suggest the preventive plan for reducing the damages from the future heavy snow. From the results of the on-the-spot inspection, plastic houses, barns and ginseng cultivation facilities are mainly damaged by heavy snow in the Honam district, and the importance of the future heavy snow preparedness measures is highly recognized in an agricultural district. In this research, 4 kinds of alternative proposals for the heavy snow are suggested.

• 한국지리정보학회지
• /
• 제2권1호
• /
• pp.32-44
• /
• 1999

본 연구의 목적은 질감을 분광정보와 함께 사용했을 때의 분류정확도의 향상을 평가하는데 있다. 먼저 부산지역의 SPOT HRV 영상에 최대우도분류를 적용하여 토지피복도를 작성하였다. 그리고 3번 파장에서 다양한 질감을 추출한 다음, 이 질감을 신파장의 형태로 분광정보에 통합하여 분류하여 질감의 사용이 분류의 정확도에 미치는 영향을 질감별로 평가하였다. 정확도 평가는 전체적인 정확도와 토지피복별 정확도로 구분하였다. 연구결과 전체적인 정확도 향상을 관측할 수 있었는데, 특히 엔트로피의 개선 효과가 우수하였다. 그리고 창의 크기는 $5{\times}5$와 $7{\times}7$이 적절한 것으로 나타났다. 그리고 질감에 따라서는 전체적인 정확도는 향상되지 않더라도 일부 토지피복의 정확도는 개선되는 것으로 나타났다. 토지피복별로는 저층건물지역, 아파트 단지. 고층건물지역, 공업지역 등 도시지역의 개선효과가 높은 것으로 나타났다.

• 한국정밀공학회지
• /
• 제25권3호
• /
• pp.101-108
• /
• 2008

Residual stress is one of the causes which make defects in engineering components and materials. Many methods have been developing to measure the residual stress. Though these methods provide the information of the residual stress, they also have disadvantage like a little damage, time consumption, etc. In this paper, we devised a new experimental technique to measure residual stress in materials with a combination of laser speckle pattern interferometry and spot heating. The speckle pattern interferometer measures in-plane deformation during the heat provides for much localized stress relief. 3-D shape is used for determining heat temperature and other parameters. The residual stresses are determined by the amount of strain that is measured subsequent to the heat and cool-down of the region being interrogated. A simple model is presented to provide a description of the method. In this paper, we could experimentally confirm that residual stress can be measured by using laser interferometry and spot heating method.

• 재무관리연구
• /
• 제23권2호
• /
• pp.85-107
• /
• 2006

이 논문에서는 새로운 뉴스에 대해 선물시장이 현물시장보다 더 민감하게 반응하는지와 더 큰 가격변동폭을 보이는지를 검증한다. 뉴스에 대한 민감도는, 선물가격의 일간변동을 이론가격 변동에 관해 회귀시킨 식의 회귀계수에 의해 측정한다. 그리고 가격변동폭은 선물가격과 이론가격의 평균범위차이($\overline{RD}$), 평균고가차이($\overline{HD}$) 및 평균저가차이($\overline{LD}$)라는 세 가지 척도를 사용하여 측정한다. 이 논문에서 사용한 자료는 코스피200 지수선물시장의 개설 초기인 1996년 7월부터 최근의 2005년 12월말까지 최근월물과 차근원물의 선물가격과 이론가격이다. 민감도의 차이를 나타내는 $\hat{\beta}$는 1과 크게 유의한 차이를 보이지 않으므로 뉴스에 대한 두 시장의 민감도는 대체로 큰 차이가 있는 것으로 보이지 않는다. 그러나 최근기간(2002년 11월${\sim}$2005년 12월)에는 최근월물 및 차근월물 모두 1보다 큰 값을 보이고 있어 선물시장이 더 민감하게 반응하고 있다. 또 최근기간에 최근월물의 가격이 좋은 뉴스에 대해 현물시장보다 더 민감하게 반응하였다. 전체기간 및 하위기간의 ($\overline{RD}$)는 대체로 0과 유의한 차이를 갖지 않는다. 그러나 최근월물의 평균고가차이($\overline{HD}$)는 전체기간과 하위기간 모두에서 뚜렷하게 유의한 양의 값을 보이고 있다. 이것은 최근월물 선물가격의 좋은 뉴스에 대한 가격변동폭이 현물가격보다 더 크다는 것을 의미한다.