• Safety and Health at Work
• /
• v.2 no.1
• /
• pp.52-56
• /
• 2011

Objectives: The occupational accident rate was officially reported to be 0.77 per 100 workers in 2001 and 0.70 in 2009. The stagnant decrease in accident rate raises a question about the effectiveness of prevention activity because there have been active prevention efforts in the past 10 years. It is also necessary to know the exact status of occupational injuries to direct a prevention strategy. Methods: The author re-analyzed occupational injury statistics to find the reason for stagnant decreases in occupational injuries. Compensated occupational injuries cases were used to calculate fatal and non-fatal injury rates. Injuries from commuting accidents and sports activities were excluded as well as occupational diseases. The number of workers was adjusted to that of full time equivalent employees. Results: The fatal injury rate excluding injuries associated with commuting accidents, sports activities, and occupational diseases decreased from 12.59 in 2001 to 8.20 in 2009. In 2007, 67.5% of accidents that involved being caught in objects, which are mostly caused by machines and equipment, occurred in the manufacturing industry; this type of incident has decreased since 2001. The fatal and non-fatal injury rates in the manufacturing industry have continuously decreased while the rates in the service industry have not changed from 2001 to 2009. Non-fatal injuries might not be reported in many cases. The number of insured workers was underestimated as long working hours were not adjusted for in the reporting system. Conclusion: The occupational fatal injury rate has decreased and the non-fatal injury rate might have decreased during the last 10 years, although the statistics show stagnancy. The decrease of the injury rate was countervailed by various factors. Hence, the current accident rate does not reflect the actual situation of accidents in Korea. Korea needs to develop an improved system to more accurately calculate occupational fatal and non-fatal injury rates.

• Archives of design research
• /
• v.16 no.2
• /
• pp.385-394
• /
• 2003

Modem market's tendency is displaying brand strategy of Corporation sells product and consumer buys rand'.Brand acts by intermediate that reflect consumer's request and experience and attach product and consumer hat produce. Successful brand intended strategy empirical esthetics enemy, and consumer recognizes brand to novel experience and think by one fixed idea (awareness). any corporations wish to get maximum effect into minimum investment expense that reduce huge public elations and advertisement charge. Do to incuse impression for product brand through direct interview with consumer at purchase visual point, and do function hat drive purchase and the importance great rawly. Therefore, sight expression of brand image must be able to from immobile one impression in consumer's spirit being inked nearly with brand .Brand that situate by affirmative impression once can arrive in purchase by brand without alternative information being withdrawn by consumer's emory. Solution of visual expression for this being city cornification laying stress on logo and mark of brand as central element of brand image, speak as communication actor who back this. This to be Dija as direction that product and connection are deep before meaning that is sight language enemy who allow fetters special quality and the seniority in age sex language enemy of brand as ell as have direction of by methods method for problem solution present can .Therefore, relation with brand image analysis of sports equipment and consumer product purchase that this research forms market economy theoretical investigating to be effective and present direction that is image-making to be consistency this the purpose be.

• 한국체육학회지인문사회과학편
• /
• v.57 no.6
• /
• pp.293-308
• /
• 2018

This study was carried out to investigate the current trends in skiing-related research from existing literature in the field of kinematics, measurement sensor and computer simulation. In the field of kinematics, research is being conducted on the mechanism of ski turn, posture analysis according to the grade and skill level of skiers, friction force of ski and snow, and air resistance. In the field of measurement sensor and computer simulation, researches are being conducted for researching and developing equipment using IMU sensor and GPS. The results of this study are as follows. First, beyond the limits of the existing kinematic analysis, it is necessary to develop measurement equipment that can analyze the entire skiing area and can be deployed with ease at the sports scene. Second, research on the accuracy of information obtained using measurement sensors and various analysis techniques based on these measures should be carried out continuously to provide data that can help the sports scene. Third, it is necessary to use computer simulation methods to clarify the injury mechanism and discover ways to prevent injuries related to skiing. Fourth, it is necessary to provide optimized ski trajectory algorithm by developing 3D ski model using computer simulation and comparing with actual skiing data.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.1
• /
• pp.117-131
• /
• 2004

The foreign superior players and national team players' turning phase was measured, compared and analyzed to help the representative players improve the skill of turn. The underwater video camera used to analyze and evaluate the representative players' skill of turn in detail and the result is as follows. 1. The record for the phase of turn was similar to the rank of the last record. The improvement of the skill of turn was required because Korean players' record was lower than the foreign players' one. In case of 200m events the 1st turn was the fastest and it took more time as the turn is repeated. 2. It shows that the preparation phase and turing motion cause the difference between the players and within one player. 3. The horizontal movement of center of gravity moves to turning point slowly in the preparation phase, does not move nearly in the turning phase and increase again in the propulsion phase. Good record has short time for turn phase. The result means that the shorten the turning phase is the most important factor. Therefore the preparation for this is required. The vertical movement is maintained or increase a little and then move to from the turning phase. 4. The characteristic of horizontal velocity in center of gravity is that there is any big changes at the preparation phase, the faster velocity is found from the better record and the accelerating time is fast at the propulsion phasen. The wrong motion is made by not using the swimming velocity for fuming and waiting and more time is required by this. 5. The angle of knee when the player touch the turning point is 106.22-135.56 and the maximum angle of knee during the driving after the touch of tuning point is full extension. The size of maximum angle of knee did not match with the required time of propulsion phase. It seems that the individual difference is big when the players touch the turning point the angle of knee and the research for the individual angle which can reveal the maximum power should be carried out. The national team player's skill for the him is behind the foreign players' one and a lot of problems were found. It shows that the players could not practice the skill for turn during the training. The 1st reason for it is the various facilities like underwater window or analyzing equipment like underwater camera with which the coaches can teach and correct the players' detailed skill. It is need to evaluate the players' detailed skill exactly and correct it by objective data to complete the good skill in the future. In this regard, the investment for the facility is necessary.

• The KIPS Transactions:PartD
• /
• v.16D no.1
• /
• pp.133-138
• /
• 2009

This paper introduces a pilot CDMA network-based wireless lap time measurement system set up on a ski slope of Yongpyong Ski Resort. The wireless lap time measurement system is one output of U-Sports Project of Gangwon Province, which is intendended for promoting local strategic business and preparation for hosting 2018 Winter Olympic Games at Pyeongchang. A pair of laser sensors is installed at the entry and exit points of a section requiring lap time measurement on a ski slope. Each laser sensor is connected to a sensor node via wire so that the sensor node can detect the time when a skier enters or exits the section. Also each sensor node is connected to a CDMA network via a modem and receives a standard time from a NTP server. Each node executes the NTP algorithm to synchronize its local time to the received server time. As a result of the time synchronization, the sensor nodes maintain its local time within a resolution of at least 10 miliseconds and transmit the time of detection to a central control center. While the wireless lap time measurement system introduced in the paper does not need expensive measurement equipment, the system allows the central control center to provide lap time records in a more convenient manner compared to conventional manual lap time measuremnt methods.

• 한국노년학
• /
• v.30 no.3
• /
• pp.793-802
• /
• 2010

The purpose of this study was to examine the influence of extreme heat on muscle function and muscle injury marker in elderly women. The subjects of this study were eight post-menopausal elderly women without any metabolic disease. All eight subjects were asked to perform the knee joint isokinetic exercise using isokinetic equipment (cybex) in the laboratory and experimental temperature within laboratory was adjusted to two conditions: extreme heat temperature(33±0.5℃) and normal temperature(20±0.5℃) maintained in 50±3% humidity conditions. Each experimental exercise was monitored and analyzed the change of HSP70, LDH and CK. Muscular functions (peak torque, total work, percentage of peak torque body weight, fatigue index, average power and total work) were significant differences at exercise between temperatural conditions (p<.05). In extreme heat temperature, muscular injury markers (HSP70, LDH and CK) were increased, threfore resulted in significantly higher than normal temperature(p<.05). These results show that extreme heat temperature can decrease muscle function in elderly women.

• Archives of design research
• /
• v.19 no.3 s.65
• /
• pp.183-194
• /
• 2006

It is expected that the typical lifestyle of the future will be transformed into an opulent and comfortable existence as the quality of life improves due to the increase in household income and reduction in working hours. In the meantime, as the standard of living becomes increasingly more comfortable and plentiful, the toll on physical health becomes magnified as a result of obesity and insufficient exercise caused by super nutrition and change in labor conditions. This has instigated a deep awareness in fitness on the part of many people, forcing them to recognize the significance of daily exercise and physical activity. The Elliptical Cross Trainer(ECT), which has drawn wide attention recently, is a non-impact athletic apparatus that not only promotes exercise of the upper body parts in such sports as skiing but also the exercise of lower parts of the body on a treadmill. It is a type of cross training athletic gear that has been developed for aerobic exercise throughout the entire body. It has already formed a market as big as that of the treadmill in Europe, America, etc. Recently, its demand is growing sharply in the Korean markets as well as those in Northeast Asian countries. Despite such demand increase and expansion, since most of the expensive ECTs are exclusively supplied by suppliers in only a few advanced countries, localization of the ECT is urgently required in order to enhance competitiveness of Korean manufacturers and to expand the market. The ECT development project has been in full swing for approximately two year since 2004 in order to secure independent design, as well as engineering and manufacturing processes in efforts to develop a commercially viable ECT.

• Physical Therapy Korea
• /
• v.29 no.4
• /
• pp.282-288
• /
• 2022

Background: Pilates exercises are used for body shape correction because they can achieve correct posture alignment through spinal stabilization. Objects: This study aimed to determine whether the use of reformers increases the effectiveness of Pilates core exercises on body alignment in standing. Methods: The study included 30 women without known diagnoses of musculoskeletal and neurological disorders or cancer. Those who had taken more than 10 Pilates lessons were excluded. The participants were randomly assigned to either the reformer exercise group or the mat exercise group, and interventional Pilates exercises were performed for 60 minutes a day, three times a week, for a total of 8 weeks. Ten movements of the reformer and mat Pilates core exercise programs were included. Exbody^® 9100 MOMI musculoskeletal analysis equipment (Exbody Inc.) was used to assess the alignment of the standing posture in the frontal plane. Results: As a result of comparing the differences within and between the groups before and after the intervention using the two-way mixed analysis of variance test, height differences in the head, pelvis, left and right, shoulders, scapulas, knees, and ankles in the frontal plane after the intervention were found in both groups. For example, the left-right symmetry of the body alignment in the standing posture was significantly improved within each group (p < 0.05). However, no significant difference was found between the groups (p > 0.05). Conclusion: Both the reformer and mat Pilates core exercises were effective for standing posture alignment, which has clinical significance. If an exercise program is developed based on the analysis of movements necessary for posture improvement and the target muscles to be strengthened, the same effect can be achieved only with mat exercise without using the reformer equipment at the beginner stage.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.1
• /
• pp.187-192
• /
• 2020

It is very useful because we can measure precise exercise volume at indoor and outdoor space, and receive push message and retrieve for exercise information by smart-phone at any-time and any-place if a fitness healthcare system base on IoT is utilized. This system is interlocked with IoT module including sensing device in sports equipment, IoT gateway, smart-phone, smart-band and server by internet. In this paper, when this, "a fitness healthcare system base on IoT", software is developed, a proper analysis and design method for practical affairs try to be presented due to showing software development analysis method and design method such as flowchart and UI design.

• Journal of Preventive Medicine and Public Health
• /
• v.51 no.4
• /
• pp.196-204
• /
• 2018

Objectives: To determine urinary mercury levels in e-waste workers in Southern Thailand and the airborne mercury levels in the e-waste shops where they worked, to describe the associations between urinary and airborne mercury levels, and to evaluate the prevalence of mercury exposure-related health effects among e-waste workers. Methods: A cross-sectional study was conducted by interviewing 79 workers in 25 e-waste shops who lived in Nakhon Si Thammarat Province, Thailand. Information on general and occupational characteristics, personal protective equipment use, and personal hygiene was collected by questionnaire. Urine samples were collected to determine mercury levels using a cold-vapor atomic absorption spectrometer mercury analyzer. Results: The e-waste workers' urinary mercury levels were $11.60{\mu}5.23{\mu}g/g$ creatinine (range, 2.00 to $26.00{\mu}g/g$ creatinine) and the mean airborne mercury levels were $17.00{\mu}0.50{\mu}g/m^3$ (range, 3.00 to $29.00{\mu}g/m^3$). The urinary and airborne mercury levels were significantly correlated (r=0.552, p<0.001). The prevalence of self-reported symptoms was 46.8% for insomnia, 36.7% for muscle atrophy, 24.1% for weakness, and 20.3% for headaches. Conclusions: Personal hygiene was found to be an important protective factor, and should therefore be stressed in educational programs. Employers should implement engineering measures to reduce urinary mercury levels and the prevalence of associated health symptoms among e-waste workers.