• Journal of Magnetics
• /
• v.22 no.1
• /
• pp.133-140
• /
• 2017

Split magnetic fluid sealing is a combination of magnetic fluid rotary and plane sealing. Using the theory of equivalent magnetic circuit design as basis, the author theorized the pressure resistance performance of magnetic fluid plane sealing. To determine the pressure resistance of magnetic fluid plane sealing, the author adopted the method of finite element analysis to calculate the magnetic field intensity in the gap between plane sealing structures. The author also analyzed the effect of different sealing gaps, as well as different ratios between the sealing gap and tooth and solt width, on the sealing performance of split magnetic fluid. Results showed that the wider the sealing gap, the lower the sealing performance. Tooth width strongly affects sealing performance; the sealing performance is best when the ratio between tooth width and sealing gap is 2, whereas the sealing performance is poor when the ratio is over 8. The sealing performance is best when the ratio between the solt width and sealing gap is 4, indicating a slight effect on sealing performance when the ratio between the solt width and sealing gap is higher. Theoretical analysis and simulation results provide reference for the performance evaluation of different sealing equipment and estimation of critical pressure at interface failure.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.4
• /
• pp.96-103
• /
• 2005

We designed the compound CVT(Continuously Variable Transmissions) by combining power circulation mode and power split mode, which have been proposed for connecting 2K-H I differential gear to the V- belt type CVU(Continuously Variable Unit), as an input coupled type. With the designed compound CVT, we carried out theoretical analysis and performance experiments for efficiency, speed ratio, power flow, and power transmission ratio. We proved that the compound CVT had a better performance than either of the power circulation mode or power split mode.

• Korean Journal of Poultry Science
• /
• v.25 no.2
• /
• pp.71-77
• /
• 1998

This study was investigated to study split diets on laying performance and eggshell quality with Hy-Line brown layers 43 weeks old for 12 weeks Layers fed a conventional diet and split diets were divided into morning and afternoon diet. The conventional diet contained 3.4 % Ca was given constant nutrients all day. Hens of the split diets fed morning diets contained 0.5 % Ca constantly and afternoon diets contained 5.9, 8.0, and 10.0 % Ca in T1to T3. Split diets were given morning diets from 04:00 to 15:00 and afternoon diets 15:00 to 21 :00 alternately. Egg production, egg weight, and egg mass were not significantly different among diets. Abnormal eggs decreased in T1 and T2, but no significantly differed(P>0.05). Feed intake decreased in all of split diets compared to control diets (P <0.05). So, feed conversion ratio also improved in split diets(P<0.05). ME and CP intake decreased in T2 and T3, and Ca intake increased in proportion to Ca content of diets(P<0.05). ME and CP requirements per kg eggs decreased in the split diets, and that of Ca increased. Although there were not different significantly, egg shell strength and thickness improved slightly in T2 at 12 week. Yolk color, haugh unit and yolk index were not different among diets. Therefore, we concluded that split diet feeding to layer could improve feed and economic efficiency with normal egg production.

• Applied Biological Chemistry
• /
• v.20 no.1
• /
• pp.147-155
• /
• 1977

In this experiment, we expected yield increase depending on the control of ineffective tiller, heightening of effective tillering ratio and continuous supply of nitrogen until later growth stage of rice plant by deep layer split application. Treats were applied at Tongil and Jinheung variety, clayey loam and sandy loam soil, and drained and non-drained condition. Nitrogenous fertilizer application wab adopted as liquefied(50%) and lumped (50% and 80%) fertilizer at 12cm depth of soil before 35 days of rice heading time against the standard soil surface application. The results are summarized as follaw. 1. a. Jinheung showed great variant width of tiller numbers per rice plant growth stage, and low effective tillering ratio at soil surface dressing. But in the case of deep layer split application, the number of tiller increased normally, and effective tillering ratio was high. b. At Tonsil, the width of increase and decrease range of effective tiller number between soil surface dressing and deep layer split application was not so high as Jinheung. Deep layer split application of 80% lumped fertilizer showed maximum effective tillering ratio ($83%{\sim}93%$). C. In the case of Jinheung, it was supposed that deep layer split application of 80% lumped fertilizer was excessive nitrogen quantity. d. Effective tillering ratio was higher than Tonsil at Jinheung. 2. The number of grains per hill was increased by the deep layer split application, but the ripening ratio was decreased inversely with the increase of total grain number. 3. Length of top leaves was elongated at Jinheung by deep layer split application. It showed significant correlation between top leaves length and grain yield. 4. Deep layer split application inclosed N content of harvested straw. Yield and N content of straw showed possitive correlation. 5. The ratio of unhulled grain yield per straw weight was increased by deep layer splication. This ratio was higher at Jinheung than Tonsil. 6. Grain yield was appeared in order of 80% lumped fertilizer>50% lumped fertilizer>50% liquefied fertilizer>surface dressing by the deep layer split application. The yield increasing factors were the increasing of effective tillering ratio, number of panicles per hill and number of ripening grains per hill. 7. Grain yield was increased at Tongil in sandy loam soil and at Jinheung in clayey loam soil by deep layer split application. 8. The grain yield was increased at drained conditions of clayey loam soil and non-drained conditions of sandy loam soil. But in the case of 80% lumped fertilizer of deep layer split application at the sandy loam soil, the yield was not increased at non-drained conditions. 9. The effect of yield increase by deep layer split application comparing with the surface dressing was higher at Tonsil than ginheung, in spite of low ripening ratio of Tonsil caused by low temperature at heading and harvesting time.

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.225-230
• /
• 2003

The major purpose of this study is to find the optimized split injection quantities and dwell angles for PM reduction without increasing NOx. The tests were performed on a Common-Rail DI Diesel Engine to obtain optimum injection timing and duration. In this study, total injection quantities were divided into the ratio of 25-75%, 50-50% and 75-25%. NOx and PM were measured on the condition of the same bsfc by increasing dwell angles. It was found that the split injection reduced NOx with dwell angle increase. For 50_50, 75_25% split injection cases, PM was reduced with 10 to 12(CAD) dwell angles. For 25_75% split injection 33% PM reduction was achieved with 8 to 12(CAD) dwell angles.

• Journal of the korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.71-77
• /
• 1984

Stress analysis of split ring with four different radius ratios under the compressive load is made by the photoelastic experiment and the numerical analysis through the FEM. The results of the two methods agreed well. Above results are also compared with those of the theoretical formula in order to confirm the range in which the formula of the curved bar is applied in connection with the radius ratio. The results of the two methods agreed well with those of the formula for the radius ratio, 3/2 and 9/7 within small errors of around 7% and 5% respectively.

• Asia-Pacific Journal of Business
• /
• v.14 no.1
• /
• pp.73-91
• /
• 2023

Purpose - The purpose of this study is to re-examine the disclosure effect of stock splits and long-term performance after stock splits using stock split data over the past 10 years, and infer the motivation (signal or opportunism) of stock splits. In addition, we focus on exploring the determinants of the short- and long-term market response to stock splits. Design/methodology/approach - We measure the short-term market response to a stock split and the long-term stock performance after the stock split announcement using the event study method. We analyze whether there is a difference in the long-term and short-term market response to a stock split according to various company characteristics through univariate analysis and regression analysis. Findings - In the case of the entire sample, a statistically significant positive excess return is observed on the stock split announcement date, and the excess return during the 24-month holding period after the stock split do not show a difference from zero. In particular, the difference between short-term and long-term returns on stock splits is larger in companies with a large stock split ratio, small companies, large growth potential, and companies with a combination of financial events after a stock split. Research implications or Originality - The results of this study suggest that at least the signal hypothesis for a stock split does not hold in the Korean stock market. On the other hand, it suggests that there is a possibility that a stock split can be abused by the manager's opportunistic motive, and that this opportunism can be discriminated depending on the size of the stock split, corporate characteristics, and financing plan.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.1003-1008
• /
• 2002

The purpose of this research was to obtain fatigue property of pavement concrete by split tension fatigue test. The specimens of pavement concrete were fabricated using the concrete at jop site. The fatigue tests of split tension were performed by 4 stress levels(90%, 80%, 70%, 60%) and 3 stress ratio(0.1, 0.3, 0.5). From this research, the S-N relationship, S-N-P relationship was derived and Weibull probability density functions was plotted using the distribution parameters.

• Journal of electromagnetic engineering and science
• /
• v.12 no.4
• /
• pp.247-253
• /
• 2012

This study presents a new, simple method for improving the front-to-back (F/B) ratio of a microstrip patch antenna. The back radiation of the microstrip patch antenna is reduced by removing some metallic parts around the ground plane and placing a new soft-surface configuration, consisting of an array of stand-up split-ring resonators on a bare dielectric substrate near the two ground plane edges. Compared to the F/B ratio of a conventional microstrip patch antenna with a full ground plane of the same size, our proposed microstrip patch antenna experimentally achieves an improved F/B ratio of 9.6 dB.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.1
• /
• pp.5-14
• /
• 2005

Continuously variable transmission (CVT) mechanisms combine the functions of a K-H-V type differential gear unit and a V-belt type continuously variable unit (CVU). For the 24 different mechanisms, 12 of them are power circulation modes while the other 12 are power split modes. Some useful theoretical formulas related to speed ratio, power flow and efficiency were derived and analyzed. These mechanisms have many advantages: they decrease CVT size and weight, increase overall efficiency, extend speed ratio range, and generate geared neutral. Compound CVTs were developed by combining the power circulation mode and power split mode, which can offer backward motion, geared neutral, underdrive and overdrive.