• Journal of Korea Spatial Information System Society
• /
• v.7 no.1 s.13
• /
• pp.13-24
• /
• 2005

Objects, which change their positions over time such as cars, are called moving objects. Trajectories of a moving object have large volumes because trajectories are accumulated. Efficient indexing techniques for searching these large volumes of trajectories are needed in the moving object databases. Especially the TB-tree which supports bundling trajectories is suitable for processing combined queries which have 2 steps: first step is selecting trajectories (range search), next is selecting the parts of each trajectory (trajectory search). But the TB-tree has unnecessary disk accesses cause of lack of spatial discrimination in range queries. In this paper, we propose and implement the splitting polity which can reduce dead spaces of non-leaf node in order to process range queries efficiently. The policy has better performance about range queries than the TB-tree as well as the advantages of the TB-tree, such as highly space utilization and efficient trajectory extraction. This paper shows that the newly proposed split policy has better performance in processing the range queries than that of the TB-tree by experimental evaluation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.1
• /
• pp.1-9
• /
• 1996

Many signal-processing techniques have been found to be useful in ultrasonic and nondestructive evaluation. Among the most popular techniques are signal averaging, spatial compounding, matched filters and homomorphic processing. One of the significant new process is split-spectrum processing(SSP), which can be equally useful in signal-to-noise ratio(SNR) improvement and grain characterization in several specimens. The purpose of this paper is to explore the utility of SSP in ultrasonic NDE. A wide variety of engineering problems are reviewed, and suggestions for implementation of the technique are provided. SSP uses the frequency-dependent response of the interfering coherent noise produced by unresolvable scatters in the resolution range cell of a transducer. It is implemented by splitting the frequency spectrum of the received signal by using gaussian bandpass filter. The theoretical basis for the potential of SSP for grain characterization in SUS 304 material is discussed, and some experimental evidence for the feasibility of the approach is presented. Results of SNR enhancement in signals obtained from real four samples of SUS 304. The influence of various processing parameters on the performance of the processing technique is also discussed. The minimization algorithm, which provides an excellent SNR enhancement when used either in conjunction with other SSP algorithms like polarity-check or by itself, is also presented.

• Journal of Korea Multimedia Society
• /
• v.6 no.3
• /
• pp.397-408
• /
• 2003

Existing indexing mechanisms of XML data using numbering scheme have a drawback of rebuilding the entire index structure when insertion, deletion, and update occurs on the data. We propose a new indexing mechanism based on split blocks to cope with this problem. The XML data are split into blocks, where there exists at most a relationship between two blocks, and numbering scheme is applied to each block. This mechanism reduces the overhead of rebuilding index structures when insertion, deletion, and update occurs on the data. We also propose two algorithms, Parent-Child Block Merge Algorithm and Ancestor-Descendent Algorithm which retrieve the relationship between two entities in the XML hierarchy using this indexing mechanism. We also propose a mechanism in which the identifier of a block has the information of its Parents' block to expedite retrieval process of the ancestor-descendent relationship and also propose two algorithms. Parent-Child Block Merge Algorithm and Ancestor-Descendent Algorithm using this indexing mechanism.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.5
• /
• pp.287-293
• /
• 2008

This study was conducted to determine the characteristics of fertilization process and embryo development of Astragalus membranaceus Bunge (Astragali Radix) to provide basic data needed in its breeding. A. membranaceus showed poor seed setting when self-pollination was induced. When artificial pollination was induced, it showed less than 5% bearing in late August, but more than 13% bearing from the beginning of September 4th. The flower size was about $17.0\;mm{\times}4.0\;mm$ and pistils and stamens had the same length of 15.0mm at flowering stage. When self-pollination or cross-pollination was induced, pollen tubes extended to an ovule. While pollen tube was extending to the ovule, reproductive cell split and formed two male generative nuclei and a vegetative nucleus. In the case of self-pollination, fertilized embryo was not observed, but was formed in the case of cross-pollination. A. membranaceus is noted to have zygote self-incompatibility. In the case of cross-pollination, fertilization was observed in 6 to 8 h after pollination, where apical cell derivatives split after fertilization. A spherical pro-embryo was then formed three days after fertilization. The seed attained full shape with a seed coat showing its distinctive contour 15 days after fertilization. Thus, A. membranaceus in Leguminosae family is found to have zygote selfincompatibility although its flower shape is shown to match the self-compatibility plant.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.3
• /
• pp.110-114
• /
• 2007

Dependence of the thermal stability of nickel silicide on the film stress of inter layer dielectric (ILD) layer has been investigated in this study and silicon nitride $(Si_3N_4)$ layer is used as an ILD layer. Nickel silicide was formed with a one-step rapid thermal process at $500^{\circ}C$ for 30 sec. $2000{\AA}$ thick $Si_3N_4$ layer was deposited using plasma enhanced chemical vapor deposition after the formation of Ni silicide and its stress was split from compressive stress to tensile stress by controlling the power of power sources. Stress level of each stress type was also split for thorough analysis. It is found that the thermal stability of nickel silicide strongly depends on the stress type as well as the stress level induced by the $Si_3N_4$ layer. In the case of high compressive stress, silicide agglomeration and its phase transformation from the low-resistivity nickel mono-silicide to the high-resistivity nickel di-silicide are retarded, and hence the thermal stability is obviously improved a lot. However, in the case of high tensile stress, the thermal stability shows the worst case among the stressed cases.

• Korean Journal of Optics and Photonics
• /
• v.23 no.3
• /
• pp.97-102
• /
• 2012

In general, one of the methods used to measure distortion is to use the full image of the regular pattern. However, because of low accuracy, this method is mainly used for an optical system such as a camera.. In order to measure distortion with high accuracy less than 1um, one can use the method of measuring the exact position of a mask image. In this case, a high accuracy stage with a laser encoder is required. In this paper, we investigate measurement of the distortion of high accuracy with a simple manual stage. The main idea is that we split and measure the mask image with the overlapping area by using CCD or CMOS, and then we get an exact position of the mask image by integrating the adjacent split images. We use the Canny Edge Detection method to get the position information of the mask image and we researched the process to exactly calculate distortion by using coordinate transformations and a least square method.

• The KIPS Transactions:PartA
• /
• v.13A no.2 s.99
• /
• pp.147-156
• /
• 2006

Recently, streaming service accounts for large part of internet traffic and it is becoming the most popular service. Because of P2P's scalability, P2P-based streaming system is proposed. There are frequent leave and join of a node. To overcome the group dynamics, Multiple Multicast Trees Methods were suggested. However, since they did not consider discrepancy in peers' capacity, it may cause the trees to be long and unstable. So we suggest Resilient Capacity-Aware Multicast Tree construction scheme (R-CAT) that promotes superior peer to upper position in the tree and construct more stable and short multicast trees. By simulation we can show that R-CAT cost more overhead packets for tree joining process, but it reduce the end-to-end delay of the resulting tree and the number of packets lost during the node joining and leaving processes much more than SplitStream.

• Journal of Animal Science and Technology
• /
• v.63 no.5
• /
• pp.1098-1113
• /
• 2021

Maturation process of alfalfa (Medicago sativa L.) could be prevented by the reduction of lignin content in terms of conventional breeding or transgenic technology. Alfalfa could exhibit higher leaf/stem ratio, with a concern of yield loss. The objective of this study was to compare forage yield and nutritive value of low lignin alfalfa and two reference varieties subjecting to two harvest intervals and three seeding rates. The experimental design was a randomized complete block in a split-split plot arrangement with four replicates, where harvest intervals (28-day and 35-day) were assigned to whole plots, seeding rates were subplots, and varieties were sub-subplots. The weighted mean nutritive value was applied to two production years of 2016 and 2017. Hi-Gest 360 (low lignin alfalfa) provided similar yield potential and increased nutritive value compared to two reference varieties. Over a two-year production period, alfalfa harvested at every 28-day interval provided more economic returns than those at 35-day interval. For the seeding year and first production year, five cuts made by the 28-day interval produced more yield than four cuts by the 35-day interval. Due to limited rainfall in May 2017, a sharp drop of the first cutting overturned the advantage of the five-cut system. Shorter intervals between harvests generally increased crude protein (CP) concentrations. The differences of relative feed value (RFV) between two harvest intervals tended to be great during the first and second cuttings. Overall, harvest interval had a large effect on nutritive value and a more significant effect on alfalfa dry matter yield than variety selection. Seeding rate did not affect alfalfa yield and nutritive value.

• Cross-Cultural Studies
• /
• v.21
• /
• pp.53-86
• /
• 2010

This paper is focused on splitting of the first Soviet theatre, MKhAT and collapse of Soviet theatre. A close attention has been paid to Art Theatres's circumstances leading to splitting, critical conscience about division between ideal and real theatres and other concrete situation before the verge of collapse. Administrative reform of the Soviet theatre at the period of Perestroika and Glasnost', its results and conflicts, occurred in the process of transition into market system. These are considered under the premise of that the problems of MKhAT were not so different to the other soviet theatres at that time. As it is known that Moscow Art Theatre is a symbol of Russian theatre. And the status of MKhAT as a symbol of Russian theatre had formulated not only the well-known Stanislavsky' system and his legendary performance The Seagull, Three Sisters etc. It was made by party's effort to make MKhAT as the first Soviet theatre and by directors, artists and critics, they had believed and tried to protect idea of MKhAT as the 'battlements' of Soviet theatrical art. One of them is O. Yefremov, a former leader and artistic director from 1970 to 2000. Actually from the periods of Sovremennik Yefremov knew that does not exist the ideal MKhAT, excepting myths, legends and administrative attitudes. Nonetheless he chose the duty of MKhAT's artistic director to construct ideal MKhAT, theatre as the best moral institution, theatre as union based on common belief. It is same motive that he had led split of MKhAT. But split of theatre did not bring the expected results. After spliting MKhAT has become almost collapsed under collapse of USSR and subsequent turmoil at 1990's. And as soviet theatre disappeared into history, Russian theatre became lost its special significance, the super-theatre's idea.

• Journal of the Korean Burn Society
• /
• v.23 no.1
• /
• pp.20-24
• /
• 2020

Diabetic patients have an increased risk of burn injuries on foot. Because of their diabetic neuropathy, they could contact with hot water or warming device without being aware of it. Split-thickness skin graft (STSG) is successful in treatment of various wound types; however, donor site wounds are sometimes problematic, and complications such as pain and impaired healing often occur. Although, donor site wounds in healthy young individuals can rapidly heal without complications, the wound-healing capacity of elderly patients or those with a comorbidity has been reported to be low. The dermatome is the most commonly used tool because it can harvest a large skin graft in one attempt. However, it is difficult to harvest tissues if the area is not flat. Furthermore, because the harvested skin is usually rectangular, additional skin usually remains after skin grafting. Therefore, use of razor blade and fragmented STSG on a large defect area is advantageous for harvesting a graft with a desired size, shape, and thickness. From January 2018 to July 2018, fragmented STSG was used in 9 patients who suffered from burn induced open wound on foot with diabetic neuropathy. With this approach, healing process was relatively rapid. The mean age of patients was 70 (57~86 years) and all of 9 patients had diabetes mellitus type 2. In all patients, the skin graft on the defect site healed well and did not result in complications such as hematoma or seroma.