• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권6호
• /
• pp.490-496
• /
• 2011

Purpose: Dr. Marquardt made the facial 'phi' mask using golden ratio. Most class III patients have bulky faces and want a smaller face. Using a facial golden mask, this study estimated and compared frontal photographs before and after operation for soft tissue measurement. The golden mask can be considered as a reference tool for facial esthetic analyses especially in lower face. Methods: Forty patients who had undergone orthognathic surgery at Samsung Medical Center from January 2006 to December 2009 were included in this study. These patients had Class III malocclusion. Lateral cephalometric radiographs, frontal clinical photos of pre-op and 8~12 month later post-op, and the facial 'phi' mask using golden ratio, were used for analysis. Reduction of the lower face area, occlusal plane changes, amounts of mandible setback and amounts of maxilla posterior impaction were estimated. Results: Lower facial reduction ratio and mandibular setback amounts were significantly different between 1-jaw and 2-jaw groups. Average postoperative changes in the area of lower face between bilateral sagittal split ramus osteotomy (BSSRO) and BSSRO combined maxilla posterior impaction were compared by using an independent simple t-test and $P$ value was 0.016. Therefore, the lower facial reduction ratio and mandibular setback amount were significantly different in maxilla posterior impaction. Conclusion: The two-jaw surgery group showed more reduction of the lower facial area than the 1-jaw surgery group. The amount of lower facial reduction was more related with the amount of mandibular setback. There was no significant relation in lower facial reduction with amount of maxilla posterior impaction, pre-op occlusal plane, post-op occlusal plane and the mandibular angle. A relationship between the change in the lower facial area and the amount of maxilla posterior impaction or the change of mandibular angle occlusal plane at pre-op could not be found because of the difference in the amount of setback between two groups.

• 한국통신학회논문지
• /
• 제32권9C호
• /
• pp.840-848
• /
• 2007

본 논문은 3차원 데이터의 다중 부호화(multiple description coding, MDC) 기법을 제안한다. 우선 다수의 평면으로 구성된 3차원 데이터를 그래프 컬러링(graph coloring)을 통해 3차원 데이터 복원 시 동일한 기여도를 제공하는 2개 평면 부분집합(subset)들로 분할한다. 다음으로 복원된 3차원 데이터의 화질을 최대화하기 위해 각 평면 부분집합의 평면 정보를 채널 오류 환경(channel error condition)에 따라 적응적으로 변형시킨다. 변형된 평면 부분집합들은 각각 압축되고 개별 채널을 통해 복호기로 전송된다. 복호기에서 전송된 2개 평면 부분집합 정보가 모두 복호되었을 경우, 복원된 3차원 부분 정보들을 결합하여 고화질 3차원 데이터를 복원한다. 만약 단일 채널만 유효하여 3차원 영상의 부분 정보만 복원될 경우, 3차원 손상부 복구 알고리듬을 적용하여 영상 표면의 손상을 복원함으로써 부드러운 3차원 표면을 재생한다. 따라서 제안하는 기법은 전송 오류 환경이 열악하여 하나의 채널이 완전히 손실된 경우에도 최소한의 3차원 영상 복원 화질을 보장한다.

• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.939-951
• /
• 2002

We propose a new multiscale Galerkin method based on interpolation wavelets for two-dimensional Poisson's and plane elasticity problems. The major contributions of the present work are: 1) full multiresolution numerical analysis is carried out, 2) general boundaries are handled by a fictitious domain method without using a penalty term or the Lagrange multiplier, 3) no special integration rule is necessary unlike in the (bi-)orthogonal wavelet-based methods, and 4) an efficient adaptive scheme is easy to incorporate. Several benchmark-type problems are considered to show the effectiveness and the potentials of the present approach. is 1-2m/s and impact deformation of the electrode depends on the strain rate at that velocity, the dynamic behavior of the sinter-forged Cu-Cr is a key to investigate the impact characteristics of the electrodes. The dynamic response of the material at the high strain rate is obtained from the split Hopkinson pressure bar test using disc-type specimens. Experimental results from both quasi-static and dynamic compressive tests are Interpolated to construct the Johnson-Cook model as the constitutive relation that should be applied to simulation of the dynamic behavior of the electrodes. The impact characteristics of a vacuum interrupter are investigated with computer simulations by changing the value of five parameters such as the initial velocity of a movable electrode, the added mass of a movable electrode, the wipe spring constant, initial offset of a wipe spring and the virtual fixed spring constant.

• 대한전자공학회논문지TC
• /
• 제48권1호
• /
• pp.92-96
• /
• 2011

본 논문에서는 CRLH 구조의 대역통과여파기를 이용하여 선형성이 개선된 전력증폭기를 구현하였다. CRLH 구조를 이용한 대역통과여파기외 구조는 윗변에는 인터디지트 형태의 신호선으로, 아랫면에는 CSRR 형태의 구조로 이루어져 있으며 via를 통해 윗면과 아랫면이 연결되어 있다. 전력증폭기의 동작대역에서 손실을 최소화하고 CRLH 전송 선로를 이용하여 2차 고조파 성분을 제한시켜서 전력증폭기의 선형성을 개선하였다. 2.l4GHz에서 동작하는 전력증폭기의 측정된 출력 전력은 33dBm 기준으로 2차 고조파는 -53.527 dBc, 3차 혼변조 신호는 -36.16 dBc, 부가전력효율은 33.14% 가 측정되었으며, 이는 기존의 전력증폭기에 비해 2차 고조파는 약 16 dB, 3차 혼변조 신호는 약 12 dB 개선되었다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제14권3호
• /
• pp.311-315
• /
• 2008

최근 인터넷 망에서 고속 스위칭을 위하여 입출력 인터페이스 간 패킷 전송에 있어서 스위칭 패브릭이 적용되고 있다. 기존의 구조들은 가변 길이 IP 패킷의 처리에 ATM 스위칭 패브릭을 그대로 적용하기 위해 패킷을 일정 크기로 분할 및 재조립하거나 크로스포인트에 버퍼를 두는 방식을 고려하고 있어 시스템에 부하를 가져온다. 본 논문에서는 데이타 메모리 평면과 스위칭 평면을 분리하여 패킷 데이타는 독립된 메모리 구조에 저장하고 동시에 메모리 주소 포인터 부분만 스위칭 패브릭을 통과하도록 하는 새로운 스위치 구조를 제안한다. 스위칭 패브릭은 주소 포인터와 기본적인 정보를 포함하는 아주 작은 미니 패킷이 통과하게 되는데 이것은 가변길이 패킷들이 경쟁하는 스위칭 패브릭과 비교할 때 탁월한 스위칭 속도를 가진다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권2호
• /
• pp.82-87
• /
• 2013

Purpose: This study evaluated postoperative maxillary stabilities in patients with skeletal Class III malocclusion who were taken both maxillary advancement surgery and mandibular retrusive surgery, using Le Fort I osteotomy, through three-dimensional computed tomography. Methods: We selected 14 patients who were taken postoperative three-dimensional computerized tomography at the time before surgery, immediately after surgery, six months after surgery among the patients undergone both maxillary advancement surgery using Le Fort I osteotomy and mandibular retrusive surgery using bilateral sagittal split ramus osteotomy. We measured and compared the vertical distance of A-point and posterior nasal spine (PNS), the horizontal distance of A-point and PNS in transverse plane and coronal plane of the three-dimensional reconstructed images, respectively. Results: In transverse plane, the distance difference between immediately after surgery ($S_1$) and immediately before surgery ($S_0$) of A-point was $-0.04{\pm}1.80$ mm, $S_2$ and $S_0$ was $-0.15{\pm}1.69$ mm, and between $S_1$ and $S_2$ was $0.11{\pm}0.58$ mm. There were no significant differences between these data (P>0.05). In transverse plane, the distance between $S_1-S_0$ of PNS was $-3.87{\pm}2.37$ mm, $S_2-S_0$ of PNS was $-3.79{\pm}2.39$ mm, and $S_1-S_2$ of PNS was $-0.08{\pm}0.18$ mm. There were significant differences between these data (P<0.05). In coronal plane, the distance between $S_1-S_0$ of A-point was $3.99{\pm}0.86$ mm, $S_2-S_0$ was $3.57{\pm}1.09$ mm, and $S_1-S_2$ was $0.42{\pm}0.42$ mm. There were significant differences between these data (P<0.05). In coronal plane, the distance between $S_1-S_0$ of PNS was $3.82{\pm}0.96$ mm, $S_2-S_0$ was $3.43{\pm}0.91$ mm, and $S_1S_2$ was $0.39{\pm}0.49$ mm. There were significant differences between these data (P<0.05). In transverse plane, it was estimated that PNS has no statistical postoperative stability in the same direction. In coronal plane, it was estimated that both A-point and PNS had no statistical postoperative stability (P<0.05). Conclusion: Clinically, the operation plan needs to take into account of the maxillary relapse.

• Journal of electromagnetic engineering and science
• /
• 제10권3호
• /
• pp.186-189
• /
• 2010

Reflection(R($\omega$)), transmission(T($\omega$)) and loss(L($\omega$)) characteristics of multi-layer metamaterials are investigated experimentally in free space with the incident EM waves perpendicular to the substrate plane. The sample is made of split-ring resonators(SRRs) and wires which are the typical model of metamaterials. The R($\omega$) and T($\omega$) of multi-layer metamaterials have been calculated from the measured S-parameters. In this paper, we got the impedance-matched result according to the curves of R($\omega$), meanwhile the T($\omega$) decreased with increasing number of layers. At last, we attained the result that the L($\omega$) gets to nearly 98% around 8 GHz, with R($\omega$)=T($\omega$)=0. The design presented in this paper achieves experimented loss near unity.

• 대한기계학회논문집A
• /
• 제27권5호
• /
• pp.807-814
• /
• 2003

3D printers are widely used to verify the designs in the early stage of product development, and are required to have short build time. However, the build time is still too long for a quick design review for engineers. This research focuses on how to split the prototype in order to reduce the build time and improve surface roughness. In order to verify the feasibility of prototype splitting, the build time and the roughness have been experimentally measured for various parts and build orientations. Based on the experimental results an expert system was developed for splitting the original CAD mod el by using an efficient splitting method. It can recommend a splitting plane based on build time, surface roughness and the number of divided parts. It is shown that the model splitting reduces the build time significantly and improves surface quality wit bout rough surfaces where the support was removed.

• The Journal of Advanced Prosthodontics
• /
• 제3권1호
• /
• pp.51-55
• /
• 2011

BACKGROUND. Mandibular displacement is a common complication of condylar fracture. In the mandibular displacement due to condylar fracture, it is difficult to restore both esthetics and function without using orthognathic surgery. CASE DESCRIPTION. This clinical report described a full mouth rehabilitation in the patient with bilateral condylar fractures and displaced mandible using bilateral sagittal split ramus osteotomy (BSSRO) and simultaneous dental implant surgery. Mandibular position was determined by model surgery through the diagnostic wax up and restoration of fractured teeth. The precise amount of the mandibular shift can be obtained from the ideal intercuspation of remaining teeth. CLINICAL IMPLICATION. Mandibular displacement by both condylar fractures can be successfully treated by orthognathic surgery. Determination of occlusal plane and visualization from diagnostic wax up are mandatory for mandibular repositioning of model surgery. Stable occlusion and regular recall check up are needed for long-term outcome.

• 한국분말재료학회지
• /
• 제6권4호
• /
• pp.307-313
• /
• 1999

The effect of carbon content on the shape of WC grains dispersed in the Co-rich matrix during liquid phase sintering of WC-35%Co hard metals has been determined. The shape of WC grains was observed using SEM stereography after removing cobalt matrix with boiling hydrochloric acid solution. The WC grains changed from hexagonal to trigonal prism as the carbon content increased in the two-phase region of(WC + $\beta$ - Co), while the morphology of WC grains changed from trigonal to hexagonal shape as the carbon content decreased. The morphology of WC grains changes reversibly along with carbon loss or carbon pick-up. Morphology change of WC grains is attributed to crystal structure of WC, which has an asymmetric array of carbon atoms. There are two types of prismatic planes having different numbers of broken W-C bonds in WC grains. It is scrutinized that as the carbon content increases, the high energy prism planes grow fast and the crystals change from hexagonal to trigonal shape. On the other hand, when the carbon content decreases, the high energy prism planes are dissolved accompanying split of (100) plane into (101) and (101) planes.