• International Journal of Industrial Entomology and Biomaterials
• /
• v.30 no.2
• /
• pp.75-80
• /
• 2015

The wet spinning of silk solution has attracted researchers' attention because of 1) unique properties of silk as a biomedical material and 2) easy control of the structure and properties of the regenerated silk fiber. Recently, studies have reported that different silkworm varieties produce silk with differences in the molecular weight (MW) and other mechanical properties of the regenerated silk fibroin (SF) film. In this study, we look at the effect of different Bombyx mori varieties on the wet spinning of SF. Although five regenerated SFs from different silkworm varieties have different MWs and solution viscosity, the wet spinnability and post drawing performance of regenerated SFs were not different. This result is due to low variability in the MW of the regenerated SF samples from the different silkworm varieties. In addition, unlike regenerated SF films, the mechanical properties of wet spun regenerated SF filament were not affected by silkworm variety. This result suggests that the mechanical properties of wet spun SF filament are less affected by MW than those of SF film are.

• Tribology and Lubricants
• /
• v.23 no.2
• /
• pp.49-55
• /
• 2007

A numerical analysis of elastohydrodynamic lubrication of elliptical contacts with both rolling and spinning has been carried out. A finite difference method with non-uniform grid systems and the Newton-Raphson method are applied to solve the problems. The velocity vectors resulting from combined spinning and rolling/sliding motion lead to asymmetric pressure distributions and film shapes. Pressure distributions, film contours and variations of the minimum and central film thicknesses are compared with various spin-roll ratios. Reduction of the minimum film thickness under spinning is remarkable whereas the central film thickness is relatively less. The spin motion have large effect on variations of the minimum film thickness with load parameter which are small in pure rolling/sliding cases. Therefore present numerical scheme can be used in the analysis of general elliptical contact EHL problems and further studies are required.

• Proceedings of the Korean Society of Rheology Conference
• /
• 2001.06a
• /
• pp.93-96
• /
• 2001

• International Journal of Industrial Entomology and Biomaterials
• /
• v.7 no.1
• /
• pp.29-36
• /
• 2003

Phytoecdysteroids with moulting hormone (MH) activity induce different responses in silkworms when used on different day of final instar, which can be manipulated for maximum benefit like early and uniform spinning behaviour, reducing crop loss and to increase cocoon yield. The results showed that application of this hormone on seed crop viz., CSR2, CSR4 and BL44 and BL67 in early stage of 5$^{th}$ instar i.e., at 72 hrs and 96 hrs though induced early and uniform spinning behaviour, there was an adverse effect by 9-36% on the economic characters like cocoon yield, cocoon weight, cocoon shell weight and also on fecundity etc. Application of this hormone in late stage of $5^th$ instar i.e., at the onset of spinning showed non-significant variations in some of the characters like cocoon weight, cocoon shell weight, cocoon shell ratio and fecundity. The physiological implications of phytoecdysteroid in hastening the maturation events and synchronization of spinning activities in different breeds are discussed.

• Transactions of Materials Processing
• /
• v.8 no.5
• /
• pp.507-519
• /
• 1999

An approach using the energy method has veen proposed for the analysis of cone spinning having the complicated deformation modes mixed by shear and normal deformation. In the proposed method, the corresponding solution is found through optimization of the total energy dissipation with respect to the parameters assumed by the velocity field defined as the variation of the length in longitudinal direction. The sheet blank is divided into three layers to consider the bending effect and the energy dissipated by shear deformation is superposed to the energy consumption due to normal deformation related with the shrinking deformation is superposed to the energy consumption due to normal deformation related with the shrinking deformation of axi-symmetric sheet element for the evaluation of total deformation energy. In order to check the validity of the proposed method, the complex spinning for making the conical cup is analyzed and the computed results are compared with the experimental results. In comparison of the computed results with existing experimental results,, the good agreement is obtained for the variation of outer radius and the distribution of thickness, and it has thus been shown that the present approach is applicable to the analysis of complex spinning.

• Korea-Australia Rheology Journal
• /
• v.17 no.2
• /
• pp.63-69
• /
• 2005

The stability of low-speed spinning process exhibiting spinline flow-induced crystallization (FIC) with no neck-like spinline deformation has been investigated using the method of linear stability analysis. Effects of various process conditions such as fluid viscoelasticity and the spinline cooling on the spinning stability have been found closely related to the development of the spinline crystallinity. It also has been found that the FIC makes the system less stable or more unstable than no FIC cases when the spinline crystallinity reaches its maximum possible value, whereas the FIC generally stabilizes the system if the crystallinity doesn't reach its maximum value on the spinline. It is believed that the destabilizing effect of the FIC on low-speed spinning when the crystallinity is fully developed on the spinline is due to the reduction of the real spinning length available for deformation on the spinline. On the other hand, the increased spinline tension caused by the FIC when the maximum crystallinity is not reached on the spinline and thus no reduction in the spinning length occurs, makes the sensitivity of spinline variables to external disturbances smaller and hence stabilizes the system. These linear stability results are consistent with the findings by nonlinear transient simulation, as first reported by Lee et al. (2005b).

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.223-226
• /
• 2006

Computational Study of a sphere subjected to free stream flow and simultaneously subjected to spinning motion is carried out. Three dimensional compressible Navier-Stokes equations are solved using fully implicit finite volume scheme. SST(Shear Stress Transport) $k-{\omega}$ turbulence model is used. Aerodynamic characteristics being affected are studied. Validation of the numerical process is done for the no spin condition. Variation of drag coefficient and shock wave strength with increase in spinning rate is reported. Changes in the wake region of the sphere with respect to spinning speed are also observed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.695-700
• /
• 2000

The dynamic stability of spinning beam with free boundary conditions for both edges subjected to a tip follower force $P_0+P_1cos{\Omega}t$ is analyzed. It is studied that the beam has a concentrated mass. and then the effects of the axial locations of the mass are studied. The beam is modelled with the Timoshenko type shear deformations. The Hamilton's principle is used to derive the equations of motion, and the critical spinning speed of a beam subjected to a follower force with various non-dimensional parameters is investigated. The finite elements are used with $C^0$ continuity to analyze the spinning beam model, and the method of multiple scales is tried to investigate the dynamic instability regions. The governing equations of motion involve periodic coefficients, which are not in the form of standard Mathieu-Hill equations. The result shows that the concentrated mass increases the dynamic stability of the spinning free-free beam subjected to a thrust.

• Clean Technology
• /
• v.15 no.4
• /
• pp.245-252
• /
• 2009

Profiles development of melt spinning process of poly(lactic acid) (PLA) was simulated via a numerical method and the radial temperature distribution was calculated using finite difference method. The spinning speed ranged from 1 km/min to 5 km/min was analyzed and the effect of spinning conditions on the radial temperature distribution was investigated. At low spinning speed, the difference between PLA and poly(ethylene terephthalate) (PET) was relatively small. As the spinning speed increased, the difference in velocity profile became prominent. PLA showed a slower spinning speed than PET and solidified more slowly. The temperature difference between the core and surface of the PLA filament reached 4.6 K, which was less than that of PET filament with a difference of 10.4 K. The radial temperature difference increased with increasing the cooling-air velocity and the spinning temperature.

• Korea-Australia Rheology Journal
• /
• v.14 no.2
• /
• pp.57-62
• /
• 2002

The sensitivity of the final filament to the ongoing sinusoidal disturbances has been Investigated in the viscoelastic spinning using frequency response method. Amplification ratios or gains of the spinline cross-sectional area at the take-up to any disturbances show resonant peaks along the frequency regime, where the frequencies at theme points directly correspond to the imaginary parts of the successive leading eigenvalues from the linear stability analysis. As shown in Jung et al. (1999) and Lee et al (2001), the sensitivity results on the effect of various process conditions such as spinline cooling and fluid viscoelasticity, obtained by dynamic transient simulation have been corroborated in this study. That is, increasing spinline cooling makes the system less sensitive to disturbances, thus stabilizes the spinning. Also, an increasing viscoelasticity for extension-thickening fluids decreases the sensitivity of the spinning. i.e., stabilizing the system, where, as it increases the sensitivity of the spinning of extension-thinning fluids. Furthermore, it has been found in the present study that the inertia force as one of secondary forces causes the system to be more stabile or less sensitive to process disturbances.