• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.372-379
• /
• 2012

In this study, we treated silica nanoparticles with bis[3-(trimethoxysilyl)propyl]amine (BTMA) silane coupling agent to modify their surfaces. We investigated the effects of BTMA hydrolysis time, BTMA concentration and BTMA treatment time on the degree of silanization reaction of silica nanoparticles. We used Fourier transform infrared spectroscopy (FTIR), elemental analysis (EA) and solid state cross-polarization magic angle spinning (CP/MAS) nuclear magnetic resonance spectroscopy (NMR) to obtain quantitative data. We found the decrease of isolated Si-OH peak intensity at 3747 $cm^{-1}$ and the increase of $-CH_2 $stretching and bending peaks with increasing hydrolysis time, concentration and treatment time of BTMA. EA analysis results also supported this trend. We found a strong effect of BTMA concentration on the degree of silanization of the silica particles, but weak effects of the hydrolysis time and the treatment time.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.429-434
• /
• 2009

In this study, electro spinning conditions for PMMA were studied. Namely, the ratio of DMF and THF and its maximum concentration were examined. Conductivity of the polymer solution containing silver nanoparticles and its effect on fiber diameter were also studied. As the results, the maximum concentration for the electro spinning of PMMA was found at 18 wt%, and the ratio of DMF/THF was 7:3. The diameter of nanofibers obtained was 100-400 nm when the PMMA solution containing 1000 ppm silver was electrospun. It was found, from TEM results, that silver nanoparticles were distributed on the edge of fibers and the resulting nanofiber mats showed a good antibacterial activity.

• Textile Coloration and Finishing
• /
• v.30 no.3
• /
• pp.199-207
• /
• 2018

In this study, the properties of polypropylene(PP) non-woven fabric spun under various conditions by the Melt-blown method were verified, and the deodorant content and deodorization of PP non-woven fabric after deodorant-treatment were investigated. PP non-woven fabrics are manufactured by varying the temperature of spin beam, hot air temperature and amount, the RPM of collector R/O and the distance between collector and spinneret, which affects the structure of the non-woven fabric. After that, the structural characteristics and air permeability of the non-woven fabric were measured. The experimental results show that the amount of air, the distance between the collector and the spinneret significantly affect the structural characteristics and air permeability of the PP non-woven fabric. And, regardless of the weight of the PP non-woven fabric, the deodorizing effect of UiO-66 MOF deodorant add-on ratio and content was higher.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.23 no.1
• /
• pp.129-135
• /
• 2011

Cathepsins are well-characterized proteases that are ubiquitously expressed in lysosomes. Previous work revealed that $Bombyx$ $mori$ cathepsins B and D are expressed in the fat body and undergo decomposition during larval-pupal metamorphosis. Quantitative RT-PCR was performed to detect cathepsin gene expression at the transcription level when challenged by $B.$ $mori$ nuclear polyhedrosis virus (BmNPV), temperature and hormones (20-hydroxyecdysone (20E) and juvenile hormone analogue (JHA)). mRNAs encoding cathepsins B and D were significantly enhanced after the larvae were infected with BmNPV, and the peak of the induction appeared at 1 day before spinning. This attenuated the inducing effect on cathepsin expression caused by infection. Temperature shock induced cathepsin expression at the later stage of the $5^{th}$ instar, and transcription levels varied with development stage and temperature. Cathepsin B and D mRNA expression in the fat body were significantly induced by JHA at the day before spinning, and with 20E, the expression reached a peak at the last day of the $5^{th}$ instar. Cathepsin B and D mRNA expression exhibited detectable changes post-treatment, without significant differences between or among the hormone concentrations.

• Textile Coloration and Finishing
• /
• v.32 no.3
• /
• pp.167-175
• /
• 2020

In this study, the optimum conditions for manufacturing PVDF nano web according to various electrospinning conditions such as solution concentration and applied voltage conditions were confirmed. The optimum spinning conditions were studied by analyzing the changes in the radioactivity of PVDF/TiO₂ nano web according to the TiO₂ content and the content of β-phase closely related to the piezoelectric properties under established conditions. As a result, it was confirmed that the concentration of the spinning solution was 20 wt%, the applied voltage was 25 kV, and the TiO₂ content was 5 phr. PVDF nano web and PVDF/TiO₂ nano web were observed morphologies through Scanning Electron Microscope(SEM) analysis. Formation of β-phase by electrospinning was confirmed by Fourier transform infrared spectroscopy(FT-IR) and X-ray Diffractometer(XRD), and the effect of the trapped nano web structure on the piezoelectric properties was investigated.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.409-414
• /
• 2008

The fabrication of gelatin nanofibers by electro spinning has been examined using the TFE/DW co-solvent system. It has been found that no beads-on-string structure was formed for the solution containing ionic salts. The resulting fibers exhibited a uniform diameter ranging from 110 to 125 nm. As the concentration of ionic salts increases, the beads become smaller and more spindle like, due to the increase of viscosity and conductivity. The addition of ionic salts induces a higher charge density on the surface of ejected jet during spinning, leading that higher elongation forces are applied to the jet. The higher enhancement of viscosity and conductivity was observed in gelatin solutions by the use of divalent salt. However, the concentration of ionic salts scarcely affected the variation of fiber diameter. While very low crystallinity was observed from XRD pattern for the sample containing no ionic salt, which increased with increasing the concentration of ionic salts.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.31-35
• /
• 2004

The speed competition of optical disk drive has been accelerated with the fast advancement of its storage density and data transmission technology. The continuous increase of the spinning speed of CD meets the unexpected and catastrophic failure of disk during the operation. The effect of its thickness and outer radius of disk were investigated to reduce stresses and J-integral around the crack tip. The effect of its thickness was considered ahead of the crack tip. In the effect of outer radius of disk, linear elastic fracture mechanics was used to obtain the critical crack length, which indicates the onset length for unstable crack growth. This approach is so significant as to detect the growing crack by disk drive before the catastrophic failure, which will provide the standard size of its safety for high-speed disk drive.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.6
• /
• pp.561-565
• /
• 2007

Because of a good wear resistance and a stable contact resistance, Ag-CdO is widely used as electrical contact material. But, the Cd-oxide mainly exists as a coarse particle and adversely affected to environment. As a reason, $Ag-SnO_2$ alloy has been developed. The Sn-oxide maintains stable and fine particle even at high temperature. In order to investigate the effect of Misch metal (Mm) additional that affects the formation of the oxide and the formation of fine matrix Ag, we studied the microstructures and properties of Ag-Sn-In(-Mm) material fabricated by rapid solidification process. The experimental procedure were melting using high frequency induction, melt spinning, and internal oxidation. The Mm addition makes Ag matrix more fine than no Mm addition. The reason is that the addition of Misch metal decreased a latent heat of fusion of alloy, as a result the rapid solidification effect of alloy is increased. The maximum hardness shows at 0.3 wt%Mm. after that the hardness is decreased until 0.4 wt% Mm, but still larger than no Mm addition alloy. At 0.5 wt% Mm alloy, the precipitation of Misch metal causes a decrease of hardness than no Mm addition alloy.

• Archives of Pharmacal Research
• /
• v.9 no.4
• /
• pp.237-242
• /
• 1986

The Synthesis of E, E, E-12-fluorofarnesol and E, Z-6-fluorofarnesol which are key intermediates for the study of biosynthesis of some sesquiterpenes, is described. E, E-Farnesyl acetate is treated with selenium dioxide to give E, E, E-12-hydroxy farnesyl acetate, whih is transformed by DAST into E, E, E-12-hydroxy farnesyl acetate, which is transformed by DAST into E, E, E,-12-fluorofarnesylacetate. The latter compound is hydrolyzed to E, E, E,-12-fluorofarnesol. The reformatsky reaction of 6-methyl-5-hepten-2-one with ethyl bromofluoroacetate affords ethyl 2-fluoro-3-hydroxy-3, 7 dimethyl-6-octanoate. This ester is acetylated and eliminated to give ethyl (Z)-2-fluoro-3, 7-dimethylocta-2, 6-dienoate, which is transformed to allyl bromide via allylic alcohol. The allyl bromide is treated with dianion of methyl acetate to give-keto ester. The $\beta$-keto ester is converted to diethyl phosphoryloxy compound. The conjugate addition of lithium dimethylcuprate to the latter compound gives fluoro ester, which is treated with DIBAL to afford E, Z-6-fluorofarnesol.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.59-60
• /
• 2003

The undrawn monofilament of poly (trimethylene terephthalate) (PTT) was obtained by melt-spinning. After being annealed at 40 C it was analyzed by the measurements of DSC, DMA, WAXD and ATR FT-IR. Tg of PTT fiber after annealing for more than 96 hours was 20 C higher than that before annealing as determined by the DSC and DMA measurements. The WAXD analysis showed very weak diffraction peaks at 2$\theta$=17$^{\circ}$ and 2$\theta$=24$^{\circ}$ for the annealing time of more than 96 hours. The ATR FT-IR measurements made clear the conformational change of methylene chains of PTT glycol residue from random to gauche-gauche conformation.