• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1805-1812
• /
• 1993

Two-dimensional spin-up in a rectangular domain is analysed by the numerical computation of the Navier-Stokes equations. The cells are in most cases generated by the vorticity developed near the uper and lower surfaces. Moreover, the movement and interaction of those vortices play a key role in establishing the quasi-steady state. The critical phenomena observed in the previous experiment turns out to be caused by the critical movement of the vortices.

• Journal of the Korean Society of Visualization
• /
• v.2 no.2
• /
• pp.32-37
• /
• 2004

In this paper the numerical method with a zonal embedded grid system for an incompressible flow within a semi-circular container is presented. The algorithm is validated by its application to some typical flow models including the spin-up flow inside a semi-circular geometry. Flow visualization for the spin-up flows was used by PIV. The results show that at high Reynolds numbers the cyclonic cell at the left-hand side region moves along the circular wall and merges with the cell at the right-hand side region.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.7
• /
• pp.1005-1013
• /
• 2002

Spin-up is a transient flow phenomenon occurring in a container when it starts to rotate from rest or its rotational speed increases from a low to high value. However, most studies on this subject have been for two-dimensional approximation. In this study, spin-up flows in a shallow rectangular container are analysed by using three-dimensional computation. We compared our results with those obtained by others using basically two-dimensional computation. Effect of two parameters, Reynolds number and liquid depth on the flow evolution is studied. We found that 2-D result is not accurate enough, and the vertical velocity distribution should be assumed of a fourth-order polynomial function for a better comparison.

• Journal of Magnetics
• /
• v.10 no.2
• /
• pp.52-57
• /
• 2005

In this research, magnetoresistance (MR) ratio (MR), resistivity, and exchange coupling field $(H_{ex})$ behaviors for sputter deposited spin valves with FeMn antiferromagnetic layer have been extensively investigated by rapid thermal annealing (RTA) as well as conventional annealing (CA) method. 10 s of RTA revealed that interdiffusion was not significant up to $325^{\circ}C$ at the interfaces between the layers when the RTA time was short. The MR of FeMn spin valves were reduced when the spin valves were exposed to temperature of $250^{\circ}C$, even for a short time period of 10 s prior to CA. $H_{ex}$ was maintained up to $325^{\circ}C$ of CA when the specimen was subjected to 10 s of RTA at $200^{\circ}C$ prior to CA, which is $25^{\circ}C$ higher than the result obtained from the CA without prior RTA. Therefore, the stability of $H_{ex}$ could be enhanced by a prior RTA before performing CA up to annealing temperature of $325^{\circ}C$. MR and sensitivity of the specimens annealed without magnetic field up to $275^{\circ}C$ were recovered to the values prior to CA, but $H_{ex}$ was not recovered. This means that reduced MR sensitivity and MR during the device fabrication can be recovered by a field RTA.

• Journal of Korea Technology Innovation Society
• /
• v.6 no.1
• /
• pp.60-73
• /
• 2003

There are many studies on spin-offs from college, but there is little concern on start-ups, which are set up by college and operated by professors. We call this type of start-up as college start-up. We check the problems and solutions of this type of start-ups. We propose three factors for success; prior checking of profitability of the business, preparation of relevant school policies and profit sharing with school and professors participated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.150-152
• /
• 2005

We investigated the fabrication and characteristics of spin-polarized LEDs based on GaN using (Ga,Mn)N as spin injection source. (Ga,Mn)N thin films were found to exhibit the ferromagnetic ordering above room temperature and the negative MR up to room temperature. The electrical characteristics in spin LEDs did not degraded in spite of the insertion of (Ga,Mn)N films. In EL spectra of spin LEDs, it is confirmed that spin LEDs emit the strong light at 7 K as well as room temperature. These results suggest that it is possible to emit spin-polarized light in our spin LEDs.

• Journal of the Korean Society of Systems Engineering
• /
• v.19 no.1
• /
• pp.14-28
• /
• 2023

The spin-off where the principal technology developers take the lead in the active and initiative pursuit of the commercialization of technologies is increasingly drawing attention, breaking away from the traditional means through the technology transfer or licensing of the public technologies created by the developers. This study aimed to determine the reasons for such differences from the perspective of the institutional theory. The results show that only the start-up support system, profit distribution system for researchers, degree of participation in the technology marketing, entrepreneurship of researchers, the use of start-up systems affected the number of start-ups of spin-off companies. Furthermore, an analysis of success factors and a study on the exploration of success paths for the RSOs will also be required

• Journal of Korea Water Resources Association
• /
• v.53 no.3
• /
• pp.181-191
• /
• 2020

In order to produce accurate initial condition of soil moisture for global Numerical Weather Prediction (NWP), spin-up experiment is carried out using Noah Land Surface Model (LSM). The model is run repeatedly through 10 years, under the atmospheric forcing condition of 2008-2017 until climatological land surface state is achieved. Spin-up time for the equilibrium condition of soil moisture exhibited large variability across Koppen-Geiger climate classification zone and soil layer. Top soil layer took the longgest time to equilibrate in polar region. From the second layer to the fourth layer, arid region equilibrated slower (7 years) than other regions. This result means that LSM reached to equilibrium condition within 10 year loop. Also, spin-up time indicated inverse correlation with near surface temperature and precipitation amount. Initialized from the equilibrium state, LSM was spun up to obtain land surface state in 2018. After 6 months from restarted run, LSM simulates soil moisture, skin temperature and evaportranspiration being similar land surface state in 2018. Based on the results, proposed LSM spin-up system could be used to produce proper initial soil moisture condition despite updates of physics or ancillaries for LSM coupled with NWP.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.43.1-43.1
• /
• 2005

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.3
• /
• pp.339-346
• /
• 2001

The impulsive spin-up flow in a shallow rectangular container is analyzed numerically by quasi 3-D unsteady laminar flow. In the non-inertia coordinates, the flow is generated by the virtual forces as Coriolis force, etc.. After the boundary layers grow up near sidewalls, primary vortexes separate from the sidewalls. As the Reynolds number increases, the subsidiary vortexes take place in the boundary layer. The rigid body rotation is started from the inner region and propagated to the outer region, finally all the fluid reaches the rigid body rotation. According to the Reynolds number and the aspect ratio, the development of vortex pattern is symmetric or asymmetric.