• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.344-350
• /
• 2013

A recent study reporting significantly reduced symmetry in arm swing amplitude in early Parkinson's disease (PD), as measured during gait by auditory cues velocity, led to this investigation of arm swing symmetry and amplitude in PD. The subjects were 14 elderly patients diagnosed with PD. Patients were measured of three conditions performed in random order: slow, general, fast. The auditory cue velocity consisted of a metronome beat ${\pm}20%$ than the subject's general gait speed. Using a motion analysis measurement system, changes in kinematic variables were compared to arm swing analysis. PD groups showed a highly significant reduction of the arm swing amplitude on the more affected body side(MAS)(p<.05). Comparison between the auditory cues velocity, there was a significant increase arm swing amplitude in fast velocity gait than slow and general velocity gait(p<.05). We conclude that motion analysis during gait by auditory cues velocity allows reliable investigation of asymmetric arm movements in early PD patients which attenuate with ongoing disease. The measurement of limb kinematics during gait by auditory cues velocity can broaden our methodological line-up for the analysis of complex motor programs in movement disorders.

• Restorative Dentistry and Endodontics
• /
• v.29 no.2
• /
• pp.141-146
• /
• 2004

The purpose of this study was to evaluate the efficiency of the preparation of oval canals using hand and engine-driven instruments with SEM observation. Thirty single-rooted teeth with oval canal were used in this study. The teeth were divided into 3 groups. In group A the teeth were instrumented up to a size 35 K-file using RC-prep and irrigated with 5% NaOCl between each file size. In group B. the teeth were instrumented with Profile according to the manufacture's instructions using RC-Prep and irrigated with 5% NaOCl between each file size. In group C. the teeth were instrumented with GT file according to the manufacture's instructions using RC-prep and irrigated with 5% NaOCl between each file size. Then. in all teeth. a final flush of 5ml of distilled water delivered for 30s. Canals were dried with sterile standardized paper points. After preparing the canals, the teeth were sectioned along their mesial and diatal surfaces by using low-speed diamond disc. chisel and mallet. Each root section was then dehydrated in graded concentration of alcohol (70, 80, 90, 100%). mounted on an aluminum stub. sputter-coated with gold-palladium and observed with scanning electron microscope (HITACHI S-4200) in middle and apical area. The results of this study were as follows: 1. In the middle area. group B and group C showed less smear layer than group A and it was statistically significant (p < 0.05). 2. In the middle area. group B showed greater smear layer than group C. but it was not statistically significant (p > 0.05). 3. In the apical area, group C showed less smear layer than group A. and it was statistically significant (p < 0.05). 4. In the apical area. group A showed greater smear layer than group B. but it was not statistically significant (p > 0.05). 5. In the apical area. group B showed greater smear layer than group C. but it was not statistically significant (p > 0.05). 6. In all groups. the middle area was less smear layer than the apical area. and it was statistically significant (p < 0.05).

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.313-326
• /
• 2007

The purpose of this study was to prove that an intermediate resin layer (IRL) oan increase the bond strength to dentin by reducing the permeability of single-step adhesives. Flat dentin surfaces were created on buccal and lingual side of freshly extracted third molar using a low-speed diamond saw under copious water flow. Approximately 2.0 mm thick axially sectioned dentin slice was abraded with wet #600 SiC paper. Three single-step self-etch adhesives; Adper Prompt L-Pop (3M ESPE, St Paul, MN, USA), One-Up Bond F (Tokuyama Corp, Tokyo, Japan) and Xeno III (Dentsply, Konstanz, Germany) were used in this study. Each adhesive groups were again subdivided into ten groups by; whether IRL was used or not; whether adhesives were cured with light before application or IRL or not; the mode of composite application. The results of this study were as follows; 1. Bond strength of single-step adhesives increased by an additional coating of intermediate resin layer, and this increasement was statistically signigicant when self-cured composite was used (p < 0.001). 2. When using IRL, there were no difference on bond strengths regardless the curing procedure of single-step adhesives. 3. There were no significant difference on bond strengths between usage of AB2 or SM as an IRL. 4. The thickness of Hybrid layer was correlated with the acidity of adhesive used, and the nanoleakage represented by silver deposits and grains was examined within hybrid and adhesive layer in most of single-step adhesives. 5. Neither thickness of hybrid layer nor nanoleakage were related to bond strength.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.365-376
• /
• 2007

The purpose of this study was to evaluate the effect of different etching times on microtensile bond strength (${\mu}TBS$) to dentin both initial and after thermocycling with 3 different types of total-etching adhesives. Fifty four teeth were divided into 18 groups by etching times (5, 15, 25 sec), adhesives types (Scotchbond Multipurpose (SM), Single Bond (SB), One-Step (OS)) and number of thermocycling (0, 2,000 cycles). Flat dentin surfaces were prepared on mid-coronal dentin of extracted third molars. After exposed fresh dentin surfaces were polished with 600-grit SiC papers, each specimen was acid-etched with 35% phosphoric acid (5, 15, 25 sec) and bonded with 3 different types of total etching adhesives respectively. Then, hybrid composite Z-250 was built up. Half of them were not thermocycled (control group) and the ethers were subjected to 2,000 thermocycle (experimental group). They were sectioned occluso-gingivally into $1.0\;{\times}\;1.0\;mm^2$ composite-dentin beams and tested with universal testing machine at a crosshead speed of 1.0 mm/min. Within limited data of this study, the results were as follows 1. There was no statistically significant difference in ${\mu}TBS$ between the thermocycled and non-thermocycled groups, except for both SM and SB etched for 25 sec. 2. In thermocycled SM and SB groups, bond strength decreased by extended etching time. In total etching systems, adhesive durability for dentin could be affected by type of solvents in adhesive and etching time. Especially, extended etching time may cause deteriorate effects on bond strength when ethanol-based adhesive was used.

• The KIPS Transactions:PartA
• /
• v.16A no.2
• /
• pp.113-124
• /
• 2009

With increasing multicore system, much effort has been put on the performance improvement of its application. Because multicore system has multiple processing devices in one system, its processing power increases compared to the single core system. However in many cases the advantages of multicore can not be exploited fully because the existing software and hardware were designed to be suitable for single core. When the existing software runs on multicore, its performance improvement is limited by the bottleneck of sharing resources and the inefficient use of cache memory on multicore. Therefore, according as the number of core increases, it doesn't show performance improvement and shows performance drop in the worst case. In this paper we propose a method of performance improvement of multicore system by applying Flow-Level Parallelism to the existing TCP/IP network application and operating system. The proposed method sets up the execution environment so that each core unit operates independently as much as possible in network application, TCP/IP stack on operating system, device driver, and network interface. Moreover it distributes network traffics to each core unit through L2 switch. The proposed method allows to minimize the sharing of application data, data structure, socket, device driver, and network interface between each core. Also it allows to minimize the competition among cores to take resources and increase the hit ratio of cache. We implemented the proposed methods with 8 core system and performed experiment. Experimental results show that network access speed and bandwidth increase linearly according to the number of core.

• Journal of radiological science and technology
• /
• v.21 no.1
• /
• pp.35-39
• /
• 1998

We analyzed image factors to determine the characteristic factors that need for intelligent replenishment system of the auto film processor. We processed the serial 300 sheets of radiographic films of chest phantom without replenishment of developing and fixation replenisher. We took the digital data by using film digitizer which scaned the films and automatically summed up the pixel values of the films. We analyzed characteristic curves, average gradients and relative speeds of individual film using densitometer and step densitometry. We also evaluated the pH of developer, fixer, and washer fluid with digital pH meter. Fixer residual rate and washing effect were measured by densitometer using the reagent methods. There was no significant reduction of the digital density numbers of the serial films without replenishment of developer and fixer. The average gradients were gradually decreased by 0.02 and relative speeds were also gradually decreased by 6.96% relative to initial standard step-densitometric measurement. The pHs of developer and fixer were reflected the inactivation of each fluid. The fixer residual rates and washing effects after processing each 25 sheets of films were in the normal range. We suggest that the digital data are not reliable due to limitation of the hardware and software of the film digitizer. We conclude that average gradient and relative speed which mean the film's contrast and sensitivity respectively are reliable factors for determining the need for the replenishment of the auto film processor. We need more study of simpler equations and programming for more intelligent replenishment system of the auto film processor.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.105-115
• /
• 2009

According to the accident statistics published by the National Police Agency in 2007, the number of commercial vehicle(city, suburb and other buses) accidents consumes 3.5 percent of the total number of traffic accidents in this year. Since the commercial vehicles are responsible for not only the drivers but also the passengers, it leads more serious social and economic problems. There have been various forms of systems such as a digital speedometer or a black box to meet the social requirement for reducing traffic accidents and safe driving. however the system based on the data after accident control the driver by analyze dangerous drive behaviors, so there is a limit to control driver in real-time. Also speedometer currently managed provide the driver warning information in real-time, but using only the speed of vehicle and RPM information regardless of actual dangerous drive behaviors, disappear the effectiveness. In this study performed a simulation for drivers in general using a simulator programed with dangerous driving types we had developed in the previous study and judging the types. It'd be more effective system to provide the drivers warning information using weight valued in this study. However in this study is limited to apply weight as a result of simulation of drivers in general in actual situation should be made up the deficit based on information of driving type of actual commercial vehicles.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.186-186
• /
• 2000

After LeComber et al. reported the first amorphous hydrogenated silicon (a-Si: H) TFT, many laboratories started the development of an active matrix LCDs using a-Si:H TFTs formed on glass substrate. With increasing the display area and pixel density of TFT-LCD, however, high mobility TFTs are required for pixel driver of TF-LCD in order to shorten the charging time of the pixel electrodes. The most important of these drawbacks is a-Si's electron mobiliy, which is the speed at which electrons can move through each transistor. The problem of low carier mobility for the a-Si:H TFTs can be overcome by introducing polycrystalline silicon (poly-Si) thin film instead of a-Si:H as a semiconductor layer of TFTs. Therefore, poly-Si has gained increasing interest and has been investigated by many researchers. Recnetly, fabrication of such poly-Si TFT-LCD panels with VGA pixel size and monolithic drivers has been reported, . Especially, fabricating poly-Si TFTs at a temperature mach lower than the strain point of glass is needed in order to have high mobility TFTs on large-size glass substrate, and the monolithic drivers will reduce the cost of TFT-LCDs. The conventional methods to fabricate poly-Si films are low pressure chemical vapor deposition (LPCVD0 as well as solid phase crystallization (SPC), pulsed rapid thermal annealing(PRTA), and eximer laser annealing (ELA). However, these methods have some disadvantages such as high deposition temperature over $600^{\circ}C$, small grain size (<50nm), poor crystallinity, and high grain boundary states. Therefore the low temperature and large area processes using a cheap glass substrate are impossible because of high temperature process. In this study, therefore, we have deposited poly-Si thin films on si(100) and glass substrates at growth temperature of below 40$0^{\circ}C$ using newly developed high rate magnetron sputtering method. To improve the sputtering yield and the growth rate, a high power (10~30 W/cm2) sputtering source with unbalanced magnetron and Si ion extraction grid was designed and constructed based on the results of computer simulation. The maximum deposition rate could be reached to be 0.35$\mu$m/min due to a high ion bombardment. This is 5 times higher than that of conventional sputtering method, and the sputtering yield was also increased up to 80%. The best film was obtained on Si(100) using Si ion extraction grid under 9.0$\times$10-3Torr of working pressure and 11 W/cm2 of the target power density. The electron mobility of the poly-si film grown on Si(100) at 40$0^{\circ}C$ with ion extraction grid shows 96 cm2/V sec. During sputtering, moreover, the characteristics of si source were also analyzed with in situ Langmuir probe method and optical emission spectroscopy.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.50-53
• /
• 2017

Purpose The change in uniformity due to the decreasement in dose should be known. $^{57}Co$ sealed sources are easy to manage and use as QC sources replacing $^{99m}Tc$. Overlapping sealed sources are expected to show variations in dose due to attenuation between sealed sources. Materials and Methods A total of three experiments were conducted. The first experiment is to observe the change in the degree of senescence of the $^{57}Co$ sealed source. The second experiment is to compare the single source and overlaped source at similar doses. In the third experiment, the sources of different doses were compared on each other to determine the changes due to the attenuation between the overlapping sources. Results The results of the first experiment did not exceed the acceptable range. but each crew showed a difference. There was no statistically significant difference in the measurement of uniformity on second and third experiment Conclusion It is believed that a $^{57}Co$ sealed source can be used as a superimposed source. It is not only economical but also convenient to use. daily uniformity measurements will help reduce scan time and speed up the testing process.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.1
• /
• pp.60-67
• /
• 2014

The comparisons between cellulolytic bacteria adhesion on rice straw and fiber digestion in time course during rumen fermentation were studied in situ. The adhesions of cellulolytic bacteria, F. succinogenes. R. albus and R. flavefaciens, were measured by RT-PCR. When the rice straws were incubated at 0. 2, 4, 8, 12 and 24 hours of the in situ rumen, straw was degraded with increasing speed during the incubation and showed the highest disappearance increasing rate (DM g/h) from 8 to 12 hour. The adhesions of F. succinogenes, R. flavefaciens and R. albus were achieved above 80% in 1 hour of in situ rumen fermentation and then keep adhesive population up after the time of fermentation. When the in situ samples were collected at 0, 5, 10, 30 and 60 min to detect the early stages of adhesion on the rice straws ingested into rumen, the numberous adhesive colony of F. succinogenes, R. flavefaciens and R. albus were detected in 5 min. In case of rice straw treated with 0, 2, 4 and 8% NaOH, all of three cellulolytic bacteria showed the increasing trends of adhesion with increasing DM disappearance of rice straw by higher concentration of NaOH at 12 hour of in situ. However, there were showed respectively difference at 24 hour. The present results gave certain evidence that adhesion of cellulolytic bacteria is definitely achieved in early stage of roughage ingestion into rumen, their colony develop the stable communities on roughage in process of rumen fermentation and then fiber degradation is accelerated.