• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.207-210
• /
• 1995

In this paper, two representative schemes for vector control of induction motor without speed sensor are studied. First, the two sensorless systems which are implemented by voltage and current source are presented with new ideas and interpretations. Then a linear model around an operating point is proposed. Finally, the stability improvement of these systems are studied and evaluated by computing the trajectories of poles and zeros.

• Journal of Power Electronics
• /
• 제3권2호
• /
• pp.99-114
• /
• 2003

This paper presents a feasible development on a highly accurate quick response adjustable speed drive implementation fur general purpose induction motor which operates on the basis of sensorless slip frequency type vector controlled sine-wave PWM inverter with an automatic tuning machine parameter estimation schemes. In the first place, the sensorless vector control theory on the three-phase voltage source-fed inverter induction motor drive system is developed in slip frequency based vector control principle. In particular, the essential procedure and considerations to measure and estimate the exact stator and rotor circuit parameters of general purpose induction motor are discussed under its operating conditions. The speed regulation characteristics of induction motor operated by the three-phase voltage-fed type current controlled PWM inverter using IGBT's is illustrated and evaluated fur machine parameter variations under the actual conditions of low frequency and high frequency operations for the load torque. In the second place, the variable speed induction motor drive system, employing sensorless vector control scheme which is based on three -phase high frequency carrier PWM inverter with automatic toning estimation schemes of the temperature -dependent and -independent machine circuit parameters, is practically implemented using DSP-based controller. Finally, the dynamic speed response performances for largely changed load torque disturbances as well as steady state speed vs. torque characteristics of this induction motor control implementation are illustrated and discussed from an experimental point of view.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.287-292
• /
• 1998

This paper presents some results of performance evaluation test via actual machines of a new hybrid vector control utilizing a new indirect orientation scheme and stable filter embedded direct orientation scheme for induction motors without speed or position sensor. It is shown through the test by 0.3(kW) and 3.7(kW) motors that the proposed sensorless vector control has the following high potentialities: 1) speed range is 0 to 600(rad/s) or more, 2) zero-speed command is accepted and settles the machines at a stable standstill with no vibration 3) it can make machines to track variable command of acceleration and deceleration $\pm$6,000(rad/s2), 4) it can make machines to drive directly load of at least 26 times larger inertia than that of the machine, 5) it can make machines to produce much larger torque than the rating in torque control mode even at standstill. The performance confirmed by the test is far away for previous schemes or sensorless drive apparatuses.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권1호
• /
• pp.37-46
• /
• 2004

A novel rotor speed estimation method using model reference adaptive control(MRAC) is proposed to improve the performance of a sensorless vector controller. In the proposed method, the stator current is used as the model variable for estimating the speed. In conventional MRAC methods, the relation between the two model errors and the speed estimation error is unclear. In the proposed method, the stator current error is represented as a function of the first degree for the error value in the speed estimation. Therefore, the proposed method can produce a fast speed estimation. The robustness of the rotor flux-based MRAC, back EMF-based MRAC, and proposed MRAC is compared based on a sensitivity function about each error of stator resistance, rotor time constant, mutual inductance. Consequently, the proposed method is much more robust than the conventional methods as regards errors in the mutual inductance, stator resistance. Therefore, the proposed method offers a considerable improvement in the performance of a sensorless vector controller at a low speed. In addition, the superiority of the proposed method and the validity of sensitivity functions were verified by simulation and experiment.

• 한국산학기술학회논문지
• /
• 제8권2호
• /
• pp.212-218
• /
• 2007

본 논문에서는 MATLAB/SIMULINK와 dSPACE DS1104를 이용하여 유도 전동기의 속도 센서리스 벡터제어를 구현하였다. 유도 전동기의 속도 센서리스 벡터제어의 운전특성을 개선하기 위하여 전압 모델 자속 추정방식과 전류 모델 자속 추정방식을 혼합한 자속 추정기 알고리즘을 도입하여 정밀도가 높은 개선된 자속 추정방식을 사용하였다. 또한 추정된 자속을 이용하여 회전자 속도를 추정하고 이를 유도전동기의 속도 제어에 사용하였다. 전체 시스템은 직접벡터제어 방식을 기반으로 일반적인 PI 제어기를 사용한 속도 제어기, 전류 제어기, 자속 제어기로 구성하였다. MATLAB/SIMULINK를 이용하여 블록다이어그램 방식으로 속도 센서리스 벡터제어 알고리즘을 구현하였고, dSPACE DS1104의 제어보드와 Real-Time-Interface(RTI)를 이용하여 실시간 제어를 수행하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.488-492
• /
• 2004

In this paper, the design of a speed sensorless vector control system for induction motor is performed by using a new sliding mode technique based on current model flux observer. A current and flux observer based on the current estimation error is constructed. The proposed current observer includes a sliding mode function, which is derivative of the flux. That is, sliding mode observer which allows the estimation of both the rotor speed and flux based on the measurement of motor terminal quantities, would be proposed. And, a synergetic speed controller using the estimated speed signal is designed to stabilize the speed loop. Simulation results are presented to confirm the theoretical analysis, and to show the system performance with different observer gains and the influence of the motor parameter.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권3호
• /
• pp.139-143
• /
• 1999

This paper is on realization of the speed-sensorless vector control of an induction motor using the RLS(Recursive Least Square) algorithm. The speed estimator is including the RLS algorithm and a rotor flux observer. The RLS algorithm has speed and rotor time constant as parameter vectors and rotor flux observer is designed to have robustness to stator resistance variation and through the IP(Integral and Proportional) speed controller stable performance is obtained for estimating rotor speed. Finally the total algorithm are realized in induction motor drive system and its effectiveness is verified.

• 전력전자학회논문지
• /
• 제3권4호
• /
• pp.346-352
• /
• 1998

본 논문에서는 새로운 신경 회로망 유도 전동기 속도 추정 방법을 제안하고, 추정된 속도를 이용하여 속도 센서리스 벡터 제어를 구현한다. 제안된 신경 회로망 속도 추정 방법은 정상 상태뿐 아니라 과도 상태에서도 정확한 속도를 추정한다. 또한 off-line에 의해 사전 학습을 필요로 하지 않고, 유도 전동기의 구동과 동시에 on-line 학습을 통하여 속도를 실시간으로 추정함으로써 구현이 용이하다. 디지털 시뮬레이션과 2.2kW 유도 전동기 시스템을 이용한 실험을 통하여 제안된 알고리즘의 효용성과 성능을 입증한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.371-375
• /
• 1998

This paper proposes a programmable low pass filter(LPF) to estimate stator flux for speed sensorless stator flux orientation control of induction motors. The programmable LPF is developed to solve the dc drift problem associated with a pure integrator and an analog LPF with fixed pole. of the programmable LPF is located far from the origin in order to decrease the time constant as speed increases. The programmable LPF has the phase and the magnitude compensator to exactly estimate stator flux in a wide speed range. So, the drift problem is much improved and the stator flux is exactly estimated in the wide speed range. The validity of the proposed programmable LPF is verified by speed sensorless vector control of a 2.2[kW] three-phase induction motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.614-616
• /
• 2004

It is waste of time in industrial plant that the PI controller gain tuning. The PI controller has many trial-and-error steps for gain design. This paper proposes the optimum gain design of PI controller using a speed estimation in sensorless vector-control. In this method, a degree of stability and Hurwitz theory are applied and the controller gain is expressed by system parameters.