• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.174-180
• /
• 2020

This paper presents the development of a tacho generator that is applicable to a DC motor for anti-aircraft weapon systems. In general, devices such as tacho generators and resolvers are used as feedback devices for controlling DC motors. A tacho generator with a wide operating temperature range was developed, which has robust characteristics against shock loads and vibrations according to the operational characteristics of anti-aircraft weapon systems. The target specifications were set based on the requirements of the tacho generator currently in operation. A rotor coupled to the shaft of the motor and a stator coupled to the housing of the motor were then designed and manufactured. The inductance was 31.0 mH, the terminal resistance was 147.7 ohms, and the rotational measurement factor was satisfactory under both normal operation and operating conditions after the maximum speed for the standard of 9.500 ± 0.475 V/krpm. In addition, the environmental suitability of the applied equipment was confirmed through the rate of change in unit temperature, and it was found that the temperature characteristics were all within 0.03 %/℃.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.11
• /
• pp.861-871
• /
• 2020

Raising the speed of the momentum wheel in the CMG increases the unintended force and torque caused by mass imbalance. This unintended force and torque should be minimized to get the better quality of satellite SAR image because they lead to the vibration of the output image. This paper shows the works on compensating the static imbalance and couple mass imbalance in the CMG wheel. First, the force and torque at the center of mass generated by the mass imbalance were predicted through M&S analysis. Second, the force and torque were estimated similarly through the M&S analysis when the measurement point was moved from the rotation center. Third, the measurement configuration for the force and torque by the mass imbalance was described. Fourth, the change of the force and torque by adding the specified mass to the momentum wheel was observed after comparing the measurements with the results of the M&S. And finally, the effect of the compensation was analyzed by comparing the force and torque before and after the correction while 24Nm class CMG was running in the standby mode.

• Journal of Wetlands Research
• /
• v.22 no.2
• /
• pp.145-152
• /
• 2020

Highways are characterized by high non-point pollutant emissions due to high traffic volumes and sections that cause abrupt change in driving speed (i.e. rest stations, ticketing office, etc.). Most highways in Korea were constructed with layers that do not allow adequate infiltration. Moreover, non-point pollution reduction facilities were not commonly installed on domestic highways. This study was conducted to evaluate a facility treating highway runoff and develop a cost-effective design for infiltration facilities by using soil amendment techniques. Performing soil amendment increased the hydraulic retention time (HRT) and infiltration rate in the facility by approximately 30% and 20%, respectively. The facility's efficiency of removing non-point pollutants (Total Suspend Soiled (TSS), Chemical Oxygen Demand(COD), Biological Oxygen Demand(BOD), Total Nitrogen (TN) and Total Phosphorus, (TP) were also increased by 20%. Performing soil amendment on areas with low permeability can increase the infiltration rates by improving the storage volume capacity, HRT, and infiltration area. The application of infiltration facilities on areas with low permeability should comply with the guidelines presented in the Ministry of Environment's Standards for installation of non-point pollution reduction facilities. However, soil amendment may be necessary if the soil infiltration rate is less than 13 mm/hr.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.624-629
• /
• 2016

A brake lever in a basic railway brake system is an important safety device that delivers braking force from the brake cylinder to the brake pad. The safety guidelines for designing rolling stock only qualitatively describe that the brake lever should have sufficient strength. Each train has a different type of brake lever. One brake lever that was designed with a factor of safety of 1.27 has failed, so the material was changed to increase the strength. Therefore, the stress distribution and weak points of the lever were identified by theoretical analysis. and structural analysis. Different brake lever designs were examined for KTX high-speed trains, which have a split-type structure, as well as for electric locomotives, which use an electric multiple unit (EMU) with a unity-type structure. A fracture test was also done to look at the relationship between the vertical stress and the bending stress during braking. The results were used to find a safety factor to apply to each train and suggest quantitative minimum guidelines. We also looked at changing the unity-type EMU brake lever to the split type under the same conditions and analyzed how much the design change affected the factor of safety.

• The KIPS Transactions:PartD
• /
• v.14D no.4 s.114
• /
• pp.447-458
• /
• 2007

The objective of this study is to provide faster mobile web service by improving performance of Contents Cache used for mobile web service in the existing Mobile Gate System. It was found that two elements existed in Mark-Up page transcoded by Contents Generator. One of the elements was dependent only on the requested DIDL page and Mark-Up type. The other was dependent on each of the requested DIDL page, Mark-Up type, size of mobile display 모바일 장치 to request service, type of images available and color depth count of the images available. The conventional Contents Cache saved the entire Mark-Up page to hold both of the two elements. This caused the problem where storage space was not effectively used because reusable elements were repetitively saved in cache memory domain due to change in one of the elements even though all the other elements were the same. As a result, a larger number of transcoded Mark-Up pages could not be saved in the same cache memory size. Therefore, in this study, Mark-Up pages transcoded by Contents Generator were divided into two elements and were separately saved. Also, in order to respond to the demand for replacing data in cache with new data, this study applied two algorithms of LFU and LRU. This study proposed the method to implement cache performance of faster speed by enabling to save more number of the transcoded Mark-Up pages in the same cache storage space.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.778-784
• /
• 2017

In this paper, we propose wired and wireless distributed control systems designed to improve the freight logistics efficiency and verify wired distributed control systems. The verification condition required that 50 cargo vehicles be connected and operated to travel 21 km from Busan Sinhang station to Jinlye Station at an average speed of about 100km/h. The verification results show that the traction output and braking output of the control and controlled cars are dispersed by the wired distributed control system. The application is expected to more than double the efficiency of the logistics compared to the existing freight transportation system. However, in the case of the wired distributed control system, cable installation and maintenance are difficult, and it is impossible to change the combination of freight vehicles. Through the verification of the wired distributed control system, the applicability of distributed control systems to freight vehicles in Korea was confirmed and the system was further developed to produce a wireless distributed control system. In order to apply the wireless distributed control system, a propagation environment analysis for the ISM band was performed in the testbed and, as a result, it was confirmed that Wifi technology using the ISM band could be utilized. In order to use the WDP (Wireless Distributed Power) devices newly installed in the target vehicles, the transmission / reception control signals associated with the propulsion / braking / total control devices are defined. In the case of wireless distributed control systems, the convenience of their application and operation is guaranteed, but reliability and emergency safety measures should because of the dependence of the control of the vehicle on radio signals.

• Journal of Korean Society of Forest Science
• /
• v.95 no.3
• /
• pp.316-322
• /
• 2006

This study was conducted to examine the changes of seed characteristics and germination properties and to determine the most suitable collection time in Ulmus davidiana var. japonica. Seeds were collected six times with the interval of seven days after April 21, 2005 at Jeong-seon. There were differences in seed characteristics and germination properties among seed collection times. The sizes of seed and fruit increased with the collection time, but seed moisture contents decreased with the collection time after increasing until May 5. The 1,000 seeds weight decreased with the collection time after increasing until May 12. Collection time showed high positive correlations (r=0.790, p<0.01) with seed size and negative correlations (r=-0.919, p<0.01) with moisture contents. Percent germination (PG) presented the highest value in seeds collected at May 5, and decreased with the collection time. Mean germination time(MGT), germination speed(GS), and germination performance index(GPI) also showed the highest values in seeds collected at May 5. PG, MGT, and GS had correlations with other seed characteristics except the 1,000 seed weight. The relative growth rate of height and root collar diameter of seedlings presented the highest values in seedling germinated from seed collected at May 5, and seedlings germinated from seeds collected at May 5 and 12 showed the highest values in chlorophyll contents. Consequently it will be possible to product a number of seedlings when the seeds of U. davidiana var. japonica are collected just before drying morphologically.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.5
• /
• pp.295-305
• /
• 2010

Although the rubble mound breakwaters in Korea have been damaged by typhoons almost every year, quantification of erosion of armor block have seldomly been made. In this paper, the damage of armor units is standardized by the relative damage. In the case where the number of damaged units is reported, it is divided by the total number of units to calculate the relative damage. In the case where the rehabilitation cost is reported, the relative damage is calculated by using its relationship with the present value of the past rehabilitation cost. The relative damage is shown to have strong correlations with the typhoon parameters such as nearest central air pressure and maximum wind speed at each site. On the other hand, the existing numerical methods for calculating the cumulative damage are compared with hydraulic model tests. The method of Melby and Kobayashi (1998) is shown to give a reasonable result, and it is used to calculate the relative damage, which is compared with the measured damage. A good agreement is shown for the East Breakwater of Yeosu Harbor, while poor agreement is shown for other breakwaters. The poor agreement may be because waves of larger height than the design height occurred due to strong typhoons associated with climate change so that the relative damage increased during the last several decades.

• Journal of Korean Society of Transportation
• /
• v.33 no.4
• /
• pp.357-367
• /
• 2015

This study aims to propose integrated management strategies based on the relationship between co-benefits and total benefits of greenhouse gases and air pollutant emissions for establishing a transport and environmental policy. The results show that the integrated management of the following policies: 'Car Free Day' and 'Early Scrapping of Decrepit Diesel Vehicle', which are used for reducing reduce gasoline and diesel, can together reduce both PM and $CO_2$ emissions and increase total benefits. In addition, the integrated management of 'Car Free Day' with environment policies and 'Congestion Charge' with environment policies simultaneously controls the three factors which influence emissions, including travel volume, travel speed and emissions factor, and was found to be effective in terms of co-benefits. This study reduces both air pollutants, which are harmful to health, and greenhouse gas emissions, which influence climate change, and improves the efficiency of policy through the integrated management of policies.

• Journal of Korean Society of Transportation
• /
• v.28 no.1
• /
• pp.39-49
• /
• 2010

Although many studies have been carried out on the pattern of behavior of drivers which result from the provision of traffic information, there have been few detailed studies on the composition of message, method for message expression, timing of provision, point of provision, media for provision, changes by traffic condition, etc. This study was intended to provide an insight into the changes in the characteristics related to the provision of information by analyzing how the patterns of information utilization change depending on the traffic condition and reclassifying such patterns according to the characteristics of media. Unlike the existing studies, this study adopted the traffic condition, using rate of information media, and the correlation coefficient label as the basis for information media classification, and categorized them into passive utilization media, active utilization media, and past experience in order to ensure the statistical reasonability. The categorized using rate of information media and traffic condition was found to have a positive(+) correlation with the travel speed in the case of passive utilization media during both consecutive holidays(Korea's traditional Thanksgiving day) and weekends, but had a negative(-) correlation with the positive utilization media and past experience. The rate of decision to take a detour based on the past experience was high at the condition of congestion or slow during both consecutive holidays and weekends, but the rate of decision to take a detour through passive utilization media was high in a smooth traffic. In other words, if the traffic condition worsens, using rate of passive utilization media would be low while the diversion rate would be high which uses the active utilization media and past experience. Therefore, it should be established to suit the traffic condition and media characteristics for strategies of traffic distribution through drivers' diversion behavior on weekends and consecutive holidays.