• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.274-278
• /
• 2004

This paper presents a strategy to drive built in-type spindle induction motor which is used as CNC (Computer Numerical Control) in the industrial world. The direct vector control which is robust to the changed machine parameters in the high speed range is used in this motor control method. And electrical model of induction motor presents the basic idea based on observer structure, which is composed of voltage model and current model. But the former has the defects in low speed range, the latter has the defects of sensitivity to motor parameter. Thus Gopinath model flux estimator which is the closed loop flux observer based on two models for the rotor flut estimation is used in this paper. Moreover this paper presents to drive the spindle motor in the high speed range by using the flux weakening control.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권9호
• /
• pp.626-634
• /
• 2000

The paper describes a new and rigorous mathematical model using counter-EMF for the rotor field oriented system with induction motor which uses the estimated speed and rotor flux based on a Model Reference Adaptive System as well as the real-time approach. The estimated speed and rotor flux is used for the speed and flux feedback control. The stability and the convergence of the estimator are improved on the basis of hyperstability theory for non-linear systems. The validity of the proposed method is verified by simulation and also the sensorless control was tested on the propulsion system simulator used for the development of Korean High-Speed Railway Train(KHSRT).

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.530-543
• /
• 2013

This paper describes a control scheme of speed sensorless fuzzy direct torque control (FDTC) of permanent magnet synchronous motor for electric vehicle (EV). Electric vehicle requires fast torque response and high efficiency of the drive. Speed sensorless FDTC In-wheel PMSM drives without mechanical speed sensors at the motor shaft have the attractions of low cost, quick response and high reliability in electric vehicle application. This paper presents a new approach to estimate the speed of in-wheel electrical vehicles based on Model Reference Adaptive System (MRAS). The direct torque control suffers in low speeds due to the effect of changes in stator resistance on the flux measurements. To improve the system performance at low speeds, a PI-fuzzy resistance estimator is proposed to eliminate the error due to changes in stator resistance. High performance sensorless drive of the in-wheel motor based on MRAS with on line stator resistance tuning is established for four motorized wheels electric vehicle and the whole system is simulated by matalb/simulink. The simulation results show the effectiveness of the new control strategy. This proposed control strategy is extensively used in electric vehicle application.

• 전력전자학회논문지
• /
• 제10권5호
• /
• pp.468-480
• /
• 2005

서보 시스템의 전체 제어 성능은 기계적 상수의 변화와 부하 토크의 영향을 크게 받는다. 그러므로 서보 시스템의 성능을 향상시키기 위해서는 기계적 상수와 부하 토크를 정확히 알 필요가 있다. 본 논문에서는 Support Vector Regression(SVR)을 이용한 기계적 상수와 부하 토크 추정 알고리즘을 제안한다. 실험 결과는 제안된 SVR 알고리즘이 서보 시스템의 기계적 상수와 부하 토크를 정확하게 추정하고 있음을 보여준다.

• Journal of electromagnetic engineering and science
• /
• 제4권1호
• /
• pp.23-29
• /
• 2004

In this paper we analyze convergence constraints and time constant of IT-LMS algorithm and derive a method of making it's time constant independent of signal power by using input variance estimation. The method for estimating the input variance is to use a single-pole low-pass filter(LPF) with common smoothing parameter value, θ. The estimator is with narrow bandwidth for large θ but with wide bandwidth for small θ. This small θ gives long term average estimation(low frequency) of the fluctuating input variance well as short term variations (high frequency) of the input power. In our simulations of multipath communication channel equalization environments, the method with large θ has shown not as much improved convergence speed as the speed of the original IT-LMS algorithm. The proposed method with small θ=0.01 reach its minimum MSE in 100 samples whereas the IT-LMS converges in 200 samples. This shows the proposed, tap-power normalized IT-LMS algorithm can be applied more effectively to digital wireless communication systems.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권6호
• /
• pp.241-251
• /
• 2002

The effect of sensor faults in direct torque control(DTC) based induction motor drives is analyzed and a new Instrument fault detection isolation scheme(IFDIS) is proposed. The proposed IFDIS, which operated in real-time, detects and isolates the incipient fault(s) of speed sensor and current sensors that provide the feedback information. The scheme consists of an adaptive gain scheduling observer as a residual generator and a special sequential test logic unit. The observer provides not only the estimate of stator flux, a key variable in DTC system, but also the estimates of stator current and rotor speed that are useful for fault detection. With the test logic, the IFDIS has the functionality of fault isolation that only multiple estimator based IFDIS schemes can have. Simulation results for various type of sensor faults show the detection and isolation performance of the IFDIS and the applicability of this scheme to fault tolerant control system design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1126-1129
• /
• 2000

The equivalent transformation of a brushless DC motor into an separately exited DC motor has been possible with the vector control technique. Vector control is an effective technique for controlling variable speed drives of brushless DC motors. Conventional vector controllers, however, suffer from electrical machine parameter variations because these controllers depend on the parameters. This paper presents the vector control of brushless DC motor using a neural network. In the proposed method, a neural network is employed as on-line estimator of the nonlinear dynamic equations of brushless DC motor. The neural network based vector controller has the advantage of robustness against machine parameter variations as compared with conventional vector controller The simulation results using Matlab/Simulink verify the useful of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.174.3-174
• /
• 2001

Electric power collection is one of the most important factors for the high-speed trains' operation. For the stable current collection, the contact wire of a catenary and the panhead of a pantograph should maintain a constant contact each other. In this paper, the catenary was modeled as a spring with time-varying stiffness from the point of a pantograph moving along the catenary, and the pantograph was modeled as a 3-D.O.F. mass-spring-damper system. Using the adaptive control method, the desired control performance could be obtained with the modeling errors and the time varying parameters. Also the state estimator was used considering the difficulty of applying the sensors obtaining feedback signals. Simulations were accomplished in various ...

• 한국통신학회논문지
• /
• 제25권4A호
• /
• pp.546-552
• /
• 2000

터보부호의 복호기는 두 개이상의 연판정 입출력이 가능한 복호기로 구성되며, 이러한 복호기는 일정길이의 비트열에서 최적의 사후확률(a posteriori robability)을 이용한 MAP(maximum-a-posteriori) symbol estimator를 이용한다. 기존의 radix-2 MAP복호기는 아주 큰 인터리버 블록 크기로 인해 고속 통신시스템의 적용에는 문제점이 있다. 따라서 본 논문에서는 인터리버 블록크기를 줄일 수 있는 radix-2 MAP복호기를 기바으로 하는 새로운 radix-4 MAP복호기를 제안하였다. Radix-4 MAP 복호기 구조에 적용하기 위해 순방향, 역방향 state metric과 채널 metric을 제안하였으며, 가우시안 채널에서 기존의 radix-2 기반의 MAP 복호기와 성능을 비교하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.792-795
• /
• 1996

In TIG welding of pipe, back bead size monitoring is important for weld quality assurance. Many researches have been performed on estimation of the back bead size by heat conduction analysis. However numerical conduction model based on many uncertain thermal parameters causes remarkable errors and thermomechanical phenomena in molten pool can not be considered. In this paper, filler wire feeding force in addition to weld current, wire feedrate, torch travel speed and orbital position angle is monitored to estimate back bead size in orbital TIG welding. Monitored welding process variables are fed into an artificial neural network estimator which has been trained with the monitored process variables (input patterns) and actual back bead size (output patterns). Experimental verification of the proposed estimation method was performed. The predicted results are in a good agreement with the actual back bead shape. The results are quite promising in that estimation of invisible back bead shape can be achieved by analyzing the welding parameters without any conventional NDT of welds.