• 제목/요약/키워드: Speed Calibration

검색결과 232건 처리시간 0.023초

The effect of particle size on the edge notched disk (END) using particle flow code in three dimension

  • Haeri, Hadi;Sarfarazi, Vahab;Zhu, Zheming;Marji, Mohammad Fatehi
    • Smart Structures and Systems
    • /
    • 제22권6호
    • /
    • pp.663-673
    • /
    • 2018
  • In this study, the effect of particle size on the cracks propagation and coalescence or cracking pattern of the edge notched disc specimens are investigated. Firstly, calibration of PFC3D was performed using Brazilian experimental test output. Then micro parameters were used to build edge notched disc specimen. The horizontal wall of the assembly is let to move downward with a standard low speed of 0.016 m/s. The numerical results show that the tensile cracks are dominant failure pattern for the modeled discs. These tensile cracks initiate from the pre-existing notch tip and propagate parallel to the loading direction then interact with the upper boundary of the modeled specimen. As the size of the balls (ball diameter) decrease the number of tensile cracks increase. The tensile fracture toughness of the samples also decreases as the particle size increases. Understanding the crack propagation and crack coalescence phenomena in brittle materials such as concretes and rocks is of paramount importance in the stability analyses for engineering structures such as rock slopes, underground structures and tunneling.

충돌 액막 분석을 위한 전기전도 액막 두께 측정장치 최적설계 (Optimum Design of a Liquid Film Thickness Measurement Device Using Electric Conductance for Impingement Liquid Film)

  • 이형원;이현창;김태성;안규복;윤영빈
    • 센서학회지
    • /
    • 제27권6호
    • /
    • pp.386-391
    • /
    • 2018
  • To analyze the film cooling in a liquid rocket engine, it is necessary to understand the characteristics of the wall-impingement liquid film. We designed an optimal two-dimensional device for measuring the thickness of the liquid film thickness. This device quantitatively measures the liquid-film thickness distribution. In previous liquid-film thickness measuring devices, the liquid film was formed over the entire area of the sensor. However, its formation depended on injection conditions. To compensate for this, optimal resistors are selected. Additionally, saturation variations with partial saturation are analyzed. Furthermore, calibration using the enhanced plate method is conducted with improvements in spatial resolution. The device designed here can be used to analyze the properties of an impingement liquid film with a slit injector. This study can be used for film-cooling analysis in liquid rocket engines.

서남권 해상풍력단지 유지보수 활동을 위한 중기 파고 예보 개선 (Improvement of Wave Height Mid-term Forecast for Maintenance Activities in Southwest Offshore Wind Farm)

  • 김지영;이호엽;서인선;박다정;강금석
    • 풍력에너지저널
    • /
    • 제14권3호
    • /
    • pp.25-33
    • /
    • 2023
  • In order to secure the safety of increasing offshore activities such as offshore wind farm maintenance and fishing, IMPACT, a mid-term marine weather forecasting system, was established by predicting marine weather up to 7 days in advance. Forecast data from the Korea Hydrographic and Oceanographic Agency (KHOA), which provides the most reliable marine meteorological service in Korea, was used, but wind speed and wave height forecast errors increased as the leading forecast period increased, so improvement of the accuracy of the model results was needed. The Model Output Statistics (MOS) method, a post-correction method using statistical machine learning, was applied to improve the prediction accuracy of wave height, which is an important factor in forecasting the risk of marine activities. Compared with the observed data, the wave height prediction results by the model before correction for 6 to 7 days ahead showed an RMSE of 0.692 m and R of 0.591, and there was a tendency to underestimate high waves. After correction with the MOS technique, RMSE was 0.554 m and R was 0.732, confirming that accuracy was significantly improved.

Microcomputer를 이용(利用)한 Data Acquisition System에 관(關)한 연구(硏究) (A Microcomputer-Based Data Acquisition System)

  • 김기대;김상래
    • Journal of Biosystems Engineering
    • /
    • 제7권2호
    • /
    • pp.18-29
    • /
    • 1983
  • 효율적(效率的)인 농업기계(農業機械)의 실내(室內) 및 실외실험(室外實驗)을 위(爲)하여 Microcomputer에 의(依)한 Data 측정(測定)을 위(爲)해 A/D 변환기(變煥器)를 Interface 시키고, 이를 기록보관(記錄保管)하기 위해 Computer memory인 2716용(用) EPROM programmer와 Microprinter를 interface시켰고, 실험(實驗) 후(後)Data를 다시 HP computer로 전송(傳送)하기 위(爲)한 RS232C 장치(裝置) 등(等)의 Hardware를 구성(構成)하고, 이들의 작동(作動)을 위(爲)한 Microprogram을 개발(開發)하여 Data acquisition system으로 활용(活用)할 수 있는 방안(方案)을 연구(硏究)한 본(本) 연구(硏究)의 주요(主要) 결과(結果)를 요약(要約)하면 다음과 같다. 1. 사용(使用) channel수(數), 측정시간(測定時間) 간격(間隔) 및 측정(測定) data수(數)를 자유(自由)로 조정할 수 있는 측정용(測定用) microprogram을 개발(開發)하였으며 최소(最小) 측정시간(測定時間) 간격(間隔)은 $58.8{\mu}s$이었다. 2. A/D 변환기(變煥器)의 Calibration을 위(爲)해 Function generator에서 삼각파(三角波), 구형파(矩形波), sin파등(波等)을 발생(發生)시켜 Oscillograph에서 확인(確認)하고 이를 계측(計測)하여 보관(保管)한 후(後) HP Computer에 전송(傳送)하여 plotting한 결과(結果) 정확(正確)한 파형(波形)을 얻을 수 있었다. 3. Data 기록(紀錄)을 위(爲)한 EPROM programmer는 잘 동작(動作)하였으며 기록(紀錄) 및 원래(原來)의 Data와 비교(比較)하는 데 총 소요시간(所要時間)은 75초 정도였고, 취급이 용이(容易)할 뿐 아니라 지워서 재사용(再使用)할 수 있어 경제적(經濟的)이었다. 4. Data의 기록(記錄)을 위(爲)한 Microprinter는 그 2kB Decimal로 변환(變換)시켜 Print하는 시간(時間)이 15분(分) 정도이었으며 계측(計測)과 동시(同時)에 기록(記錄)시키는 완속측정용(緩速測定用)으로 적당하였다. 5. 본(本) system과 HP3000 컴퓨터 간(間)의 Data 전송(傳送) 장치(裝置)를 사용(使用)하면 2k byte의 Data를 HP3000 computer로 전송(傳送)하는데 1~2분(分)정도 소요(所要)되었고, 작동(作動)은 만족스러웠다. 6. 사용(使用) 전원(電源)은 DC/DC 변환기(變煥器)를 사용(使用)하여 입력전원(入力電源)이 7~25V로 단일화(單一化)하였으며, 그 상용전류(常用電流)는 1.8A정도로 tractor의 battery를 사용(使用)할 경우도 시동시(始動時)에 전압강하(電壓降下)에 의(依)한 컴퓨터의 오동작(誤動作)이 일어나지 않았으며 야외실험(野外實驗)에서의 적응성(適應性)이 우수하였다. 이상(以上)의 결과(結果)를 종합할 때 본(本) system은 실내(室內) 및 실외(室外) 실험(實驗)을 위(爲)한 Data auquistition system으로 활용(活用)할 수 있으며 경제적면(經濟的面)이나 정말 고속 측정(側定) 면(面)에서 우수한 성능(性能)을 갖춘 것으로 인정(認定)된다.

  • PDF

사분위편차 및 관리도 모형에 의한 GPS 수집기반 구간통행속도 데이터 이상치 제거방안 연구 (The Quartile Deviation and the Control Chart Model of Improvement Confidence for Link Travel Speed from GPS Probe Data)

  • 한원섭;김동효;현철승;이호원;오영태;이철기
    • 한국ITS학회 논문지
    • /
    • 제7권6호
    • /
    • pp.21-30
    • /
    • 2008
  • GPS를 탑재한 프로브차량에 의해 수집되는 교통정보(구간통행속도)는 차량검지기와 같이 특정링크에 대하여 연속적으로 교통정보를 수집하는 방식이 아니다. 따라서 단속교통류 구간에서 신호시간 등의 영향으로 수집되는 정보의 안정성과 대표값 등에 문제점이 있다. 본 연구는 GPS를 장착한 프로브차량에 의해 수집된 구간통행속도 데이터를 필터링하는 방법을 개발하는데 목적이 있다. 시간간격별로 수집되는 데이터에 대하여 사분위편차와 관리도에 의해 이상치를 제거하였다. 사분위편차를 적용한 결과는 제거율이 $0{\sim}3.7%$ 이고, 개별 관리도에 의한 결과는 제거율이 $0.3{\sim}7.2%$ 이었다. 두 방법 모두 교통소통이 원활한 새벽시간 대에 이상치 제거율이 낮고, 낮 시간대에 이상치 제거율이 높은 것으로 나타났다. 문제점으로 지적되는 것은 모형에 충실할 경우 Low Bound에서 이상치의 제거기준이 낮게 설정되는 것이다. 따라서 시스템 운영과정에서 경험적인 사항이 반영되어져야 할 것으로 검토된다.

  • PDF

디지털방사선촬영술을 이용한 합착용 시멘트의 방사선불투과성 평가 (Evaluation of the Radiopacity of Contemporary Luting Cements by Digital Radiography)

  • 안서영;이두형;이규복
    • 구강회복응용과학지
    • /
    • 제29권4호
    • /
    • pp.377-383
    • /
    • 2013
  • 이 연구의 목적은 치과임상에서 사용되는 8종의 합착용 시멘트의 방사선불투과성을 디지털 방사선 촬영술로 평가하는 것이었다. BisCem, Clearfil SA Luting, Duolink, Maxcem Elite, Multilink Speed, Panavia F 2.0, RelyX Unicem Clicker, V-link의 8종의 재료를 5개의 원형 시편 (직경: 4 mm, 두께: 1 mm)으로 제작하였고 사람 치아의 법랑질과 상아질 시편을 1 mm 두께로 준비하여 알루미늄 스텝 웨지와 함께 촬영하였다. 관전압 70kVP, 관전류 4 mA, 노출시간 0.156초, 초첨 필름간 거리는 30 cm으로 영상판을 이용하여 촬영하였으며, ImageJ 소프트웨어를 이용하여 평균 회색조 수치를 측정하고, 이를 흡수계수로 환산한 후 검량선(calibration curve)을 이용하여 각 합착용 시멘트의 등가 알루미늄 두께를 구하였다. 합착용 시멘트의 평균 방사선불투과성은 알루미늄 두께 0.71 ~ 5.66 mm로, RelyX Unicem Clicker (0.71 mm Al)을 제외하고는 등가 알루미늄 두께 보다 높은 방사선불투과성을 보여 ISO 규격을 만족하였으며, 법랑질은 1.79 mm, 상아질은 0.19 mm 두께의 알루미늄에 해당하는 방사선불투과성을 나타내었다.

점진적 충격파모형의 함축적 의미와 검산 (Implications and numerical application of the asymptotical shock wave model)

  • 조성길
    • 한국ITS학회 논문지
    • /
    • 제11권4호
    • /
    • pp.51-62
    • /
    • 2012
  • Lighthill과 Whitham의 충격파모형에 따르면 동일한 속도를 유지하는 교통류 흐름상태에서도 충격파가 존재하며, 이는 라디오 전파처럼 보이지도 않고 관측할 수도 없다고 하였다. 최근의 한 논문은 이 문제에 대해 새로운 접근방법을 통해 위와 같은 모순이 어떻게 발생하였는지를 보여주었고, 이를 개선하기 위해 점근적 충격파모형 (asymptotical shock wave model) 을 제시하였다. 점근적 충격파모형은 동일한 속도로 이동하는 균일한 교통류에서 라디오 전파와 같은 관측 불가능한 충격파가 존재하지 않는 것을 증명하였다. 그러나 상기 논문은 모형의 유도와 증명에 치중하였고 모형으로서의 해석이나 구체적인 수치를 적용한 모형의 검증은 아직 실행된 적이 없다. 본 논문은 점근적 충격파모형의 내포된 의미를 해석하고, 구체적인 수치를 바탕으로 한 시나리오를 통해 모형의 성능을 시험하였다. 그 결과 점근적 충격파모형은 기존 모형에 비해 수식상의 큰 차이는 없었지만, 유일한 차이인 등식의 세 번째 항목이 모형 결과에 결정적인 차이를 나타냄을 확인하였다. 새 모형에 도입된 파라메터는 적용된 수치의 대소에 따라 그 결과가 다르게 나타났다. 이는 기존의 충격파모형에는 없는 특징으로서, 적절한 수치를 선정한다면 다양한 교통흐름에 신축적으로 모형을 적용할 수 있을 것으로 판단된다. 또한 구체적인 수치를 적용한 점근적모형의 시나리오별 시험 결과 동일한 조건에서 새로운 모형은 기존 모형에 비해 충격파가 교통류의 하류 측으로 더 진행됨을 확인하였다. 양 모형간의 이러한 차이는 통계적 유의성 검토에서도 확인되었으며, 향후 현장 자료를 적용한 추가적 비교연구가 필요한 것으로 사료된다.

후방산란 엑스선 영상획득을 위한 다채널 검출기 개발 (Development of Multi-channel Detector of X-ray Backscatter Imaging)

  • 이정희;박종원;최영철;임창휘;이상헌;박재흥
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2022년도 추계학술대회
    • /
    • pp.245-247
    • /
    • 2022
  • 엑스선 후방산란 영상획득기술은 물체에서 산란되는 엑스선을 활용하여 피조사체 내부 영상을 획득할 수 있는 기술로 영상획득을 위해서는 시스템은 엑스선 발생장치와 산란 엑스선을 측정하기 위한 검출시스템을 포함하여야 한다. 엑스선 후방산란 영상획득장치는 고속으로 회전하는 회전 콜리메이터를 통해 생성되는 엑스선을 샘플링 간격으로 실시간 신호를 획득하여야 하며 이를 위해서는 고속 신호획득장치가 요구된다. 우리는 후방산란 영상획득장치를 위해 대면적 플라스틱 섬광체(500×600×50mm3)와 광증배관으로 구성된 후방산란 엑스선 획득용 센서부에서 생성되는 신호의 변환 및 전달하기 위한 고속 다채널 신호획득장치를 개발하였다. 개발한 후방산란 영상획득용 검출시스템은 최소 15u초 간격으로 신호의 획득이 가능하며 최대 6채널의 신호의 변환 및 전달이 가능한 시스템으로 고속 후방산란 엑스선 영상획득이 가능하다. 개발된 검출시스템은 개별 센서의 보정을 위한 전압, 신호이득, 저레벨 제거 등의 원격 조절 기능을 포함한다. 현재 우리는 다양한 조건에서 엑스선 후방산란 영상획득을 적용 시험을 수행하고 있다.

  • PDF

Nondestructive Estimation of Lean Meat Yield of South Korean Pig Carcasses Using Machine Vision Technique

  • Lohumi, Santosh;Wakholi, Collins;Baek, Jong Ho;Kim, Byeoung Do;Kang, Se Joo;Kim, Hak Sung;Yun, Yeong Kwon;Lee, Wang Yeol;Yoon, Sung Ho;Cho, Byoung-Kwan
    • 한국축산식품학회지
    • /
    • 제38권5호
    • /
    • pp.1109-1119
    • /
    • 2018
  • In this paper, we report the development of a nondestructive prediction model for lean meat percentage (LMP) in Korean pig carcasses and in the major cuts using a machine vision technique. A popular vision system in the meat industry, the VCS2000 was installed in a modern Korean slaughterhouse, and the images of half carcasses were captured using three cameras from 175 selected pork carcasses (86 castrated males and 89 females). The imaged carcasses were divided into calibration (n=135) and validation (n=39) sets and a multilinear regression (MLR) analysis was utilized to develop the prediction equation from the calibration set. The efficiency of the prediction equation was then evaluated by an independent validation set. We found that the prediction equation - developed to estimate LMP in whole carcasses based on six variables - was characterized by a coefficient of determination ($R^2_v$) value of 0.77 (root-mean square error [RMSEV] of 2.12%). In addition, the predicted LMP values for the major cuts: ham, belly, and shoulder exhibited $R^2_v$ values${\geq}0.8$ (0.73 for loin parts) with low RMSEV values. However, lower accuracy ($R^2_v=0.67$) was achieved for tenderloin cuts. These results indicate that the LMP in Korean pig carcasses and major cuts can be predicted successfully using the VCS2000-based prediction equation developed here. The ultimate advantages of this technique are compatibility and speed, as the VCS2000 imaging system can be installed in any slaughterhouse with minor modifications to facilitate the on-line and real-time prediction of LMP in pig carcasses.

DETERMINATION OF MOISTURE AND NITROGEN ON UNDRIED FORAGES BY NEAR INFRARED REFLECTANCE SPECTROSCOPY(NIRS)

  • Cozzolino, D.;Labandera, M.;Inia La Estanzuela
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1620-1620
    • /
    • 2001
  • Forages, both grazed and conserved, provide the basis of ruminant production systems throughout the world. More than 90 per cent of the feed energy consumed by herbivorous animals world - wide were provided by forages. With such world - wide dependence on forages, the economic and nutritional necessity of been able to characterize them in a meaningful way is vital. The characterization of forages for productive animals is becoming important for several reasons. Relative to conventional laboratory procedures, Near Infrared Reflectance Spectroscopy (NIRS) offers advantages of simplicity, speed, reduced chemical waste, and more cost-effective prediction of product functionality. NIR spectroscopy represents a radical departure from conventional analytical methods, in that entire sample of forage is characterized in terms of its absorption properties in the near infrared region, rather than separate subsamples being treated with various chemicals to isolate specific components. This forces the analyst to abandon his/her traditional narrow focus on the sample (one analyte at a time) and to take a broader view of the relationship between components within the sample and between the sample and the population from which it comes. forage is usually analysed by NIRS in dry and ground presentation. Initial success of NIRS analysis of coarse forages suggest a need to better understand the potential for analysis of minimally processed samples. Preparation costs and possible compositional alterations could be reduced by samples presented to the instrument in undried and unground conditions. NIRS has gained widespread acceptance for the analysis of forage quality constituents on dry material, however little attention has been given to the use of NIRS for chemical determinations on undried and unground forages. Relatively few works reported the use of NIRS to determine quality parameters on undried materials, most of them on both grass and corn silage. Only two works have been found on the determination of quality parameters on fresh forages. The objectives of this paper were (1) to evaluate the use of NIRS for determination of nitrogen and moisture on undried and unground forage samples and (2) to explore two mathematical treatments and two NIR regions to predict chemical parameters on fresh forage. Four hundred forage samples (n: 400) were analysed in a NIRS 6500 instrument (NIR Systems, PA, USA) in reflectance mode. Two mathematical treatments were applied: 1,4,4,1 and 2,5,5,2. Predictive equations were developed using modified partial least squares (MPLS) with internal cross - validation. Coefficient of determination in calibration (${R^2}_{CAL}$) and standard error in cross-validation (SECV) for moisture were 0.92 (12.4) and 0.92 (12.4) for 1,4,4,1 and 2,5,5,2 respectively, on g $kg^{-1}$ dry weight. For crude protein NIRS calibration statistics yield a (${R^2}_{CAL}$) and (SECV) of 0.85 (19.8) and 0.85 (19.6) for 1,4,4,1 and 2,5,5,2 respectively, on a dry weight. It was concluded that NIRS is a suitable method to predict moisture and nitrogen on fresh forage without samples preparation.

  • PDF