• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.220-228
• /
• 1995

An optimized 4-stage 12-bit pipelined CMOS analog-to-digital converter (ADC) architecture is proposed to obtain high linearity and high yield. The ADC based on a multiplying digital-to-analog converter (MDAC) selectively employs a binary-weighted-capacitor (BWC) array in the front-end stage and a unit-capacitor (UC) array in the back-end stages to improve integral nonlinearity (INL) and differential nonlinearity (DNL) simultaneously whil maintaining high yield. A digital-domain nonlinear error calibration technique is applied in the first stage of the ADC to improve its accuracy to 12-bit level. The largest DNL error in the mid-point code of the ADC is reduced by avoiding a code-error symmetry observed in a conventional digitally calibrated ADC is reduced by avoiding a code-error symmetry observed in a conventional digitally calibrated ADC is simulated to prove the effectiveness of the proposed ADC architecture.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.605-612
• /
• 2018

In this paper, a new method for linear sweeping of wavelength swept laser has proposed, and the linear sweeping of 1kHz speed and 80nm range has realized by using this method. The proposed requires only one-shot calibration in the early stage on a wave pattern applied to FFP-TF. This makes the problem with nonlinear swept lasers like a cumbersome and time-consuming signal processing brought on by every recalibration to be resolved.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.9
• /
• pp.4527-4548
• /
• 2017

This paper proposes a method to generate panoramic images by combining conventional feature extraction algorithms (e.g., SIFT, SURF, MPEG-7 CDVS) with sensed data from inertia sensors to enhance the stitching results. The challenge of image stitching increases when the images are taken from two different mobile phones with no posture calibration. Using inertia sensor data obtained by the mobile phone, images with different yaw, pitch, and roll angles are preprocessed and adjusted before performing stitching process. Performance of stitching (e.g., feature extraction time, inlier point numbers, stitching accuracy) between conventional feature extraction algorithms is reported along with the stitching performance with/without using the inertia sensor data. In addition, the stitching accuracy of video data was improved using the same sensed data, with discrete calculation of homograph matrix. The experimental results for stitching accuracies and speed using sensed data are presented in this paper.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.2
• /
• pp.47-53
• /
• 2010

This paper proposed Residual Image detection and Color Info using the face detection technique. The proposed technique was fast processing speed and high rate of face detection on the video. In addition, this technique is to detection error rate reduced through the calibration tasks for tilted face image. The first process is to extract target image from the transmitted video images. Next, extracted image processed by window rotated algorithm for detection of tilted face image. Feature extraction for face detection was used for AdaBoost algorithm.

• Journal of electromagnetic engineering and science
• /
• v.17 no.1
• /
• pp.39-43
• /
• 2017

In this paper, a systematic and statistical calibration technique was implemented to calibrate a high-speed signal converting system containing multiple digital-to-analog converters (DACs). The systematic error (especially the imbalance between DACs) in the current combining network of the multi-DAC system was modeled and corrected by calculating the path coefficients for individual DACs with wideband reference signals. Furthermore, by applying a Kalman filter to suppress noise from quantization and clock jitter, accurate coefficients with minimum noise were identified. For correcting an arbitrary waveform generator with two DACs, a co-simulation platform was implemented to estimate the system degradation and its corrected performance. Simulation results showed that after correction with 4.8 Gbps QAM signal, the signal-to-noise-ratio improved by approximately 4.5 dB and the error-vector-magnitude improved from 4.1% to 1.12% over 0.96 GHz bandwidth.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.25-28
• /
• 2001

This paper introduce a millimeter-wave radar system. As Fig 1 shows, This system consists of millimeter-wave radar front-end and digital signal processing parts through receive waves regarding up-coming obstacles. The system works as follow process; (1) Generate regular tripodal waves using the FMCW pulse generator (2) Transmit/Receive waves regarding up-coming obstacles (3) Analog filtering (4) FIFO memory interface (5) FFT(Fast Fourier Transform) (6) Calculation of distance / speed between cars (7) Object display and calibration. We have progress to solve the problem like as increase of traffic accidents causing damage and injuries due to the increased number of motor vehicles and long distance driving, and Need for a device to help drivers who are in trouble due to bad weather conditions. We are expect to Take the lead as a core technology in the ITS industry and to develop circuit and signal processing technologies related to millimeter-wave bandwidth.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.60-69
• /
• 2003

The simplified two-color method is proposed which can estimate the temperature distribution and the soot density of the whole flame with the image analysis of the high-speed photographs. The factors influenced on its processing were examined, for example, the selection of the wave length, the kind of films, the preparation of the calibration curve between the radiance of flame and the luminance temperature. The simplified two-color method reported in this paper can be used as a tool for the improvement of the combustion process in direct injection diesel engine.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.6
• /
• pp.594-599
• /
• 2008

Image data produced from ADD water-tunnel test are currently analyzed manually. The accuracy and elapsed time of this process can be determined by observers. In this paper, the algorithm based on MATLAB for improved image data processing and analysis is proposed. This algorithm consists of camera calibration, gray-level transformation, noise filtering and binarization in image preprocessing, vortex trajectory measurement in image analysis. Experimental results show that the proposed algorithm has better accuracy and execution speed than those of the existing methods.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.05a
• /
• pp.112-115
• /
• 2003

Sub-90nm급 high speed 소자를 위해서는 extension영역의 shallow junction과 sheet 저항의 감소가 필수적이다. 일반적으로 기생저항은 channel저항의 약 10-20%정도를 차지하도록 제작되므로, 이를 최소화하여 optimize하기 위해서는 기생저항에 대한 성분 분리와 이들이 가지는 저항값에 대한 정량적 계산이 이루어져야 한다. 이에 본 논문은 calibration된 TCAD simulation을 통해 90nm급 Tr. 에서 각 영역의 저항성분을 계산, 평가하는 방법을 제시한다. 이 결과, 특히, extension영역의 표면-accumulation부분이 가장 개선이 있어야 할 부분으로 분석되었으며, 이 저항은 gate하부에 존재하는 extension으로부터 발if되는 측면 doping의 tail영역으로 인해 형성되는 것으로,doping의 abruptness가 가장 중요한 factor인 것으로 판단된다.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.58.2-58.2
• /
• 2019

BITSE is a technology demonstration mission to remotely measure the speed, temperature, and density of the solar wind as it forms as close as 3 Rs. BITSE obtained coronal images during its one day flight above more than 99% of the atmosphere, and calibration data are taken in the laboratory as well as during the flight. As the linearly polarized K-corona is much fainter than other bright sources like diffraction, sky, and F-corona, a careful data reduction is required to obtain reliable scientific results. We will report status of the obtained data, the reduction progress, and future plan.