• Journal of Biosystems Engineering
• /
• v.29 no.4
• /
• pp.335-340
• /
• 2004

This study was conducted to evaluate the internal quality of Korean red ginseng using VIS/NIR transmittance spectra. To classify the internal qualities, partial least squares(PLS) regression was conducted. The main results are as follows: To develop the PLS model, several wave bands were divided and incorporated into the model. Among the bands, the wavelength range of 550-1,020nm, excluded noise signal, showed the best evaluation results. Effect of step size on the performance of quality evaluation showed optimal at 15 steps. In order to enhance the accuracy of quality evaluation, the abnormal spectrum shape was considered first and then the PLS model was applied. Among the 150 samples, 12 samples were evaluated by the spectrum shape. In this study, to develop the optimal PLS regression model, among the 150 samples, 138 samples was used with exception of 12 samples which could evaluate the spectrum shape. The result of quality evaluation was promising as SEC and correlation coefficient were 1.09 and 0.967, respectively, and SEP and correlation coefficient were 1.04 and 0.958, respectively.

• Earthquakes and Structures
• /
• v.17 no.5
• /
• pp.477-487
• /
• 2019

Understanding the behavior of skew bridges under the action of earthquakes is quite challenging due to the combined transverse and longitudinal responses even under unidirectional hit. The main goal of this research is to assess the response of skew bridges when subjected to longitudinal and transversal earthquake loading. The effect of skew on the response considering two- and three- span bridges with skew angles varying from 0 to 60 degrees is illustrated. Various pier fixities (and hence stiffness) and cross-section shapes, as well as different abutment's bearing articulations, are also studied. Finite-element models are established for modal and seismic analyses. Around 900 models are analyzed under the action of the code design response spectrum. $Vis-{\grave{a}}-vis$ modal properties, the higher the skew angle, the less the fundamental period. In addition, it is found that bridges with skew angles less than 30 degrees can be treated as straight bridges for the purpose of calculating modal mass participation factors. Other monitored results are bearings' reactions at abutments, shear and torsion demand in piers, as well as deck longitudinal displacement. Unlike straight bridges, it has been typically noted that skew bridges experience non-negligible torsion and bi-directional pier base shears. In a complementary effort to assess the accuracy of the conducted response spectrum analysis, a series of time-history analyses are applied under seven actual earthquake records scaled to match the code design response spectrum and critical comparisons are performed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.6
• /
• pp.67-73
• /
• 2022

Industrial inverters are used in a variety of fields for electric power supply. They may be exposed to vibration and heat once they are installed. This study focused on a framework of accelerated life testing of an industrial inverter considering fatigue damage as the primary source of deterioration. Instead of analyzing detailed failure mechanisms and the product's vulnerability to them, the potential of fatigue failure is considered using the fatigue damage spectrum calculated from the environmental vibration signals. The acceleration and temperature data were gathered using field measurement and spectral analysis was conducted to calculate the vibration signal's power spectral density (PSD). The fatigue damage spectrum is then calculated from the input PSD data and is used to design an accelerated fatigue life testing. The PSD for the shaker table test is derived that has the equivalent fatigue damage to the original input signal. The tests were performed considering the combined effect of random vibration and elevated temperature, and the product passed all the planned tests. It was successfully demonstrated that the inverter used in this study could survive environmental vibration up to its guarantee period. The fatigue damage spectrum can effectively be used to design accelerated fatigue life testing.

• Structural Engineering and Mechanics
• /
• v.87 no.1
• /
• pp.57-68
• /
• 2023

Response spectrum method is still an effective approach for the design of buildings with supplemental dampers. In practice, complex complete quadratic combination (CCQC) rule is always used in the response spectrum method to consider the effect of non-classical damping. The conventional CCQC rule is based on exact complex mode vectors. Sometimes the calculated complex mode vectors may be not excited by the external loading and errors in the structural responses always arise due to the mode truncation. Load-dependent Ritz (LDR) vectors are associated with the external loading and LDR vectors not excited can be automatically excluded. Also, contributions of higher modes are implicitly contained in the LDR vectors in terms of static responses. To improve the calculation efficiency and accuracy, LDR vectors are introduced in the CCQC rule in the present study. Firstly, the generation procedure of LDR vectors suitable for non-classical damping system is presented. Compared to the conventional LDR vectors, the LDR vectors herein are complex-valued and named as complex LDR (CLDR) vectors. Based on the CLDR vectors, the CCQC rule is then rederived and an improved response spectrum method is developed. Finally, the effectiveness of the proposed method in this paper is verified through three typical non-classical damping buildings. Numerical results show that the CLDR vector is superior to the complex mode with the same number in the calculation. Since the generation of CLDR vectors requires less computational cost and storage space, the method proposed in this paper offers an attractive alternative, especially for structures with a large number of degrees of freedom.

• Korean Journal of Acupuncture
• /
• v.28 no.3
• /
• pp.85-98
• /
• 2011

Objectives : The aim of this thesis is to examine the effect of acupuncture treatment at the GB37 on normal humans by using the power spectral analysis of the EEG. Methods : EEG (Electroencephalogram) power spectrum exhibits site-specific and state-related differences in specific frequency bands. In this thesis, the power spectrum was measured by the complexity. the 32 channels EEG study was carried out in the 13 subjects (12 males ; age=22.58 years old, 1 females ; 22 years old). Results : In the ${\alpha}$ (alpha) band, the power values at F7, F3, F4, F8, FTC2, C4, T4, CP1, CP2, TCP2, TT2, Pz, P4, Po1, Po2, O1, Oz, O2 channels (p<0.05) during the GB37-acupoint treatment were significantly changed. And in many channels were decreased. In the ${\beta}$ (beta) band, the power values at Cz, C4, T4, Tcp1, T6, Po1, O1, Oz, O2 channels (p<0.05) during the GB37-acupoint treatment were significantly changed. And in many channels were decreased. In the ${\delta}$(delta) band, the power values at Fp1, TT2 channels (p<0.05) during the GB37-acupoint treatment were significantly changed. And in many channels were decreased. In the $\theta$ (theta) band, the power values at Fp1, F8, FTC2, Pz channels (p<0.05) during the GB37-acupoint treatment were significantly changed. And in many channels were decreased. Conclusions : This results suggest that the acupuncture treatment at the GB37 significantly mostly change the power spectrum value on the alpha (18 channels), beta (9 channels) bands.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.400-405
• /
• 2000

We investigated the effect of TMIn (trimethly-indium) source depletion on InGaAs, InGaAsP and 1.55 $\mu\textrm{m}$ InGaAs/InGaAsP SMQW by using EPISON ultrasonic monitor for measuring the concentration of metalorganic/carrier gas mixtures. And the problems for the growth reproducibility in MOCVD was solved by using an EPISON ultrasonic monitor with closed-loop mode under the condition of TMIn source depletion. The saturation pressure of TMIn was dramatically decreased over consumption of 80%. In the case of bulk epilayer, Up-shifting of 300 arcsec to Ga-rich direction and FWHM broadening by a factor of two in DCXRD spectrum were observed due to the TMIn source depletion. In the case of SMQW, Up-shifting of 300 arcsec to Ga-rich direction in DCXRD spectrum and blue-shift of 40 nm in PL spectrum were observed due to the TMIn source depletion. However, good reproducibility ($\Delta\theta$<$\pm$100 arcsec) was achieved even the condition of 95% of TMIn consumption, when we used the EPISON with closed-loop mode.

• International Journal of High-Rise Buildings
• /
• v.9 no.3
• /
• pp.273-282
• /
• 2020

An innovative high-rise timber-concrete hybrid structure was proposed in previous research, which is composed of the concrete frame-tube structure and the prefabricated timber modules as main structure and substructures, respectively. Considering that the timber substructures are built on the concrete floors at a different height, the floor response spectrum is more effective in estimating the seismic response of substructures. In this paper, the floor response spectra of the hybrid structure with different structural parameters were calculated using dynamic time-history analysis. Firstly, one simplified model that can well predict the seismic response of the hybrid structure was proposed and validated. Then the construction site, the mass ratio and the frequency ratio of the main-sub structure, and the damping ratio of the substructures were discussed. The results demonstrate that the peaks of the floor response spectra usually occur near the vibration periods of the whole structure, among which the first two peaks stand out; In most cases, the acceleration amplification effect on substructures tends to be more evident when the construction site is farther from the fault rupture; On the other hand, the acceleration response of substructures can be effectively reduced with an appropriate increase in the mass ratio of the main-sub structure and the damping ratio of the substructures; However, the frequency ratio of the main-sub structure has no discernible effect on the floor response spectra. This study investigates the characteristics of the floor response spectrum of the novel timber-concrete structure, which supports the future applications of such hybrid structure in high-rise buildings.

• Korean Journal of Food Science and Technology
• /
• v.25 no.3
• /
• pp.214-219
• /
• 1993

Properties of the antioxidative fraction isolated from browning reaction product (BRP) that were obtained from 2 M L-ascorbic acid (AsA) solution (adjusted to pH 7.0) by heating for 25 hrs at $85^{\circ}C$ were investigated. Both of dialyzable and nondialyzable fraction isolated from BRP showed antioxidative effect. Dialyzable fraction has stronger antioxidative activity than nondialyzable. Dialyzable fraction was divided into the three fractions (A, B, C) by gel filtration. Among these fractions, the fraction (A) that had the highest reducing power and lowest browning drgree had lowest antioxidative activity. The fraction (C) that had lowest reducing power and highest browning degree showed strongest antioxidative effect. In the UV-visible spectrum of these fractions, the maximum absorption wavelengths of fraction A and B were 266.1 and 257.4nm, respectively, and fraction C showed a weaker absorption peak at 274.8nm. Infrared (IR) spectrum results showed that all fractions (A, B, C) had both hydroxy and carboxylic groups, and fraction B and C had carboxylic ester group.

• Earthquakes and Structures
• /
• v.3 no.3_4
• /
• pp.341-363
• /
• 2012

The spectral representation method is a quick and versatile tool for the generation of spatially variable, response-spectrum-compatible simulations to be used in the nonlinear seismic response evaluation of extended structures, such as bridges. However, just as recorded data, these simulated accelerations require processing, but, unlike recorded data, the reasons for their processing are purely numerical. Hence, the criteria for the processing of acceleration simulations need to be tied to the effect of processing on the structural response. This paper presents a framework for processing acceleration simulations that is based on seismological approaches for processing recorded data, but establishes the corner frequency of the high-pass filter by minimizing the effect of processing on the response of the structural system, for the response evaluation of which the ground motions were generated. The proposed two-step criterion selects the filter corner frequency by considering both the dynamic and the pseudo-static response of the systems. First, it ensures that the linear/nonlinear dynamic structural response induced by the processed simulations captures the characteristics of the system's dynamic response caused by the unprocessed simulations, the frequency content of which is fully compatible with the target response spectrum. Second, it examines the adequacy of the selected estimate for the filter corner frequency by evaluating the pseudo-static response of the system subjected to spatially variable excitations. It is noted that the first step of this two-fold criterion suffices for the establishment of the corner frequency for the processing of acceleration time series generated at a single ground-surface location to be used in the seismic response evaluation of, e.g. a building structure. Furthermore, the concept also applies for the processing of acceleration time series generated by means of any approach that does not provide physical considerations for the selection of the corner frequency of the high-pass filter.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.2
• /
• pp.131-140
• /
• 2021

Purpose : The purpose of this study was to systematically review the studies on the effects of social story intervention on the individuals with autism spectrum disorders(ASD) to provide the basis for evidence-based practice. Methods : In order to find out the studies on the effect of social story intervention on individuals with ASD, studies published from 2011 to December 2020 were searched on Google Academic Search. The keywords used were "autism spectrum disorder AND social story". A total of 16,900 studies were searched, and from these, 12 studies were selected based on the application of the selection and exclusion criteria. The included studies comprised of 10 single subject design studies and 2 randomized controlled trials design studies. The included studies were analyzed in accordance to population, intervention, outcome measures and results. Results : As a result of analysing the subjects of the included studies, we found out that pre-school children and adolescents were the most common groups of individuals diagnozsed with ASD. In addition to ASD, the diagnosis of the subjects included intellectual disability, Asperger, and Prader-willi. We found out that there were more interventions that were mixed with other interventions, than just the pure social story interventions. In particular, video modeling was found to be the most frequent intervention. This was followed by photo-based social stories. For outcome measure, autism social skills profile was found to be the most often used standardized assessment. For a non-standardized assessment, social desired behavior was found to be the most frequently evaluated behavior, followed by personal problem behavior. Of all the dependent variables, the dependent variable reported as "effective" was the most, followed by "some effective". Conclusion : This study is organized to help the individuals with ASD, families, researchers, and therapists understand the effects of social story intervention on the individuals with ASD in an easy fashion. Further, therapists can use this study as the basic data for evidence-based practice.