• Bulletin of the Korean Chemical Society
• /
• 제24권9호
• /
• pp.1261-1264
• /
• 2003

A method for the determination of trace amount of sulfide based on the addition reaction of sulfide with methyl green at pH 7.5 and $25{\circ}C$ is described. The reaction is monitored spectrophotometrically by measuring the decrease in absorbance of the dyestuff at 637 nm by the initial rate and fixed time method. The calibration graph is linear in the range 30-1200 ppb. The theoretical limit of detection was 0.014 ppm. Seven replicate analysis of a sample solution containing 0.70 ppm sulfide gave a relative standard deviation of 1.5%. The interfering effects of various ions on sulfide determination have been reported and procedures for removal of interference have been described. The proposed method was applied successfully to the determination of sulfide in tap and wastewater samples.

• 대한화학회지
• /
• 제15권1호
• /
• pp.5-9
• /
• 1971

모나자이트 시료중의 토륨만을 신속히 정량하기 위하여 양이온 교환수지법을 사용한 분리법을 고안하였다. 희토류 원소를 포함한 모든 공존 이온을 3N 염산으로 용출제거하고 남아있는 토륨을 5N 황산으로 용출한 다음 토린을 착색제로 사용하여 광도 법을 써서 정량하였다. 방사성 동위원소 및 출광 분광법을 써서 용출된 토륨의 정량적인 회수 및 그의 화학적 순도를 확인하였다.

• 대한화학회지
• /
• 제52권6호
• /
• pp.622-629
• /
• 2008

• 한국산업보건학회지
• /
• 제15권1호
• /
• pp.1-7
• /
• 2005

Although the Fourier Transform Infra-Red spectrophotometric Direct on Filter(FTIR-DOF) method is a useful analytical technique for quantifying quartz content in respirable dust samples, a number of analytical problems must be taken into consideration such as, to name only a few, inhomogeneous deposition of particles, level of environmental humidity, uneven surface of the filter, and interfering minerals in the sample. This study was designed to select the most suitable wavelength and proper filter material for the method, and to investigate effects of humidity and inhomogeneous deposition of particles on the filter. Samples of respirable dust, created in a dust chamber containing standard material of quartz, were collected using a cyclone equipped with a 25mm filter as a collection medium. The results were as follows; 1. Among seven (7) commercially available filters tested for the FTIR-DOF method, the DM 800 filter showed the best analytical performance having the lowest background absorbance bands and no overlapping peaks at 799, 779, and $695cm^{-1}$. 2. The variations of absorbance due to humidity ranged from 1.0% to 3.3% for $799cm^{-1}$, 1.0% to 3.3% for $779cm^{-1}$, and 8.9%~20.9% for $695cm^{-1}$ peaks, respectively. The $699cm^{-1}$ peak was proved to be most vulnerble to environmental humidity for quantitative analysis of quartz. 3. As for effects of inhomogeneous deposition of samples, the highest variation of absorbance of 10.9% ($13.5{\mu}g$) was observed when using the 695cm-1. The variations of absorbance from the other two peaks, 799 and $779cm^{-1}$, ranged from 1.2 to 3.2%, and 1.4 to 4.1%, respectively. Therefore, the $799cm^{-1}$ peak was considered to be most reliable for quantitative analysis of quartz. The results of this study suggest that, for quantitative analysis of quartz in the respirable dust samples, use of the $799cm^{-1}$ peak can minimize the influence of environmental humidity and inhomogeneous deposition of particles on the filter. The FTIR-DOF method, if adopted for routine analysis of quartz in the respirable dust samples, could save sample preparation time and efforts substantially and also could increase analytical throughputs. Since use of the $799cm^{-1}$ peak is prone to be affected by interferences in the sample, further research on minimizing the effects is needed.

• 약학회지
• /
• 제29권3호
• /
• pp.117-123
• /
• 1985

A clorimetric determination method of pyruvic acid using hydroxylamine was studied. Hydroxylamine was reacted with pyruvic acid to form complex compound in the presence of Cu(II) ion. Optimal conditions for the quantitative analysis were investigated and the structure of complex was examined spectrometrically. The molar ratio (2:1) and the stability constant ($1.88{\times}10^{4}$) of the complex were measured. It was the characteristic feature of this method that the commonly encountered interfering substances such as fructose, glucose and lactic acid do not infuence the measurement of pyruvic acid.

• Journal of Microbiology and Biotechnology
• /
• 제10권4호
• /
• pp.518-521
• /
• 2000

Aspergillus niger is capable of metabolizing dimethyphthalate. The maximum weight of mycelium wa observed afterabout 6-8 dys of incubation. A TLC analysis revealed the accumulation of metabolites in the resting cell culture. Monomethylphthalate, phthalate, and protocatechuate were shown to be the intermediates by thin layer chromatographic and spectrophotometric analyses. The fungus metabolized dimethylphthalate through monomethylphthalate, phthalate, and protocatechuate as evidenced by the oxygen uptake and an enzymatic analysis. The terminal aromatic metabolite, protocatechuate, is metabolized via the ortho-cleavage pathway.

• 약학회지
• /
• 제24권3_4호
• /
• pp.159-165
• /
• 1980

Tetrathiocyanatocobaltate[II] forms complexes with tertiary amine salts or quarternary ammonium salts which were extractable from aqueous solution by organic solvent. In order to study composition of the complex, the colored crystalline complexes produced were evaluated with elemental analysis, infrared and mass spectra. And also a novel spectrophotometric method for the determination of tertiary amine salt or quarternary ammonium salt with tetrathiocyanatocobaltate[II] was established by organic solvent extraction within coefficient of variation of 1.06-1.35%.

• Archives of Pharmacal Research
• /
• 제27권11호
• /
• pp.1114-1119
• /
• 2004

This paper describes the quantitative determination of flavonoids, tannins and ellagic acid in the leaves from wild and cultivated variations of Rubus L. species (Rosaceae): raspberry (2 wild and 13 cultivars) and blackberry (3 wild and 3 cultivars). The content of flavonoids was analyzed using spectrophotometric (the Christ-M llers method) and HPLC analysis after acid hydrolysis. The content of tannins was determined by the weight method, with hide powder, described by German Pharmacopoeia 10 (DAB 10). Ellagic acid content was examined using the HPLC method after acid hydrolysis. Flavonoid content, determined using the Christ-Muller's method was higher for the blackberry leaves than for the raspberry leaves and varied between 0.46% and 1.05%. Quercetin and kaempferol were predominant in all samples analyzed using the HPLC method. The highest flavonoid content was found in the leaves of R. nessensis (1.06%); with results in all of the examined samples varying between 0.27% and 1.06%. The concentration of ellagic acid in all species was determined after acid hydrolysis and ranged from 2.06% to 6.89%. The leaves of raspberries are characterized by greater amounts of tannins (varying between 2.62% and 6.87%) than the leaves of other species. The results from this study indicate that the analyzed species are a rich source of flavonoids, ellagic acid and tannins, which may be used for the quality assessment of Rubus L. species leaves.

• 생명과학회지
• /
• 제21권4호
• /
• pp.610-612
• /
• 2011

본 연구는 클로로겐산의 함량을 측정하기 위한 흡광도 방법을 구축하였으며, 구체적으로는 클로로겐산이 $50^{\circ}C$와 글라이신 및 알칼리 조건하에서 녹색반응이 일어난다는 현상을 이용했다. 녹색형성은 일련의 클로로겐산 농도에 의존성을 가졌다. 본 연구에 따른 클로로겐산의 측정방법을 이용하여 블루베리에 함유된 클로로겐산의 함량을 분석하였다(12.42 mg/g d.w). 이러한 방법은 저가의 비용과 빠른 시간으로 많은 시료를 대량으로 쉽게 클로로겐산의 함량은 측정할 수 있는 효과를 가진다.

• 대한화학회지
• /
• 제34권6호
• /
• pp.616-621
• /
• 1990

UV-VIS 흡광광도법으로 Nd, Pr, Sm, Eu, Ho 및 Er을 정량할 때 스펙트럼 방해를 다원소 보정법으로 방법에 대하여 연구하였다. 개별희토류의 흡광도를 측정하고 또, Nd와 Pr의 혼합용액 및 Sm, Eu, Ho, Er의 혼합용액의 흡광도를 측정하여 몰흡광 계수를 구하고 이들로부터 상호 방해가 가장 적은 파장 즉, Nd(444.2nm), Pr(575.1nm), Sm(401.7nm), Eu(394.2nm), Ho(416.6nm), Er(379.7 nm)임을 알았다.