• 제목/요약/키워드: Spectral shift

검색결과 193건 처리시간 0.031초

메탄 하이드레이트 부존 퇴적층으로부터 획득한 수직탄성파 (VSP) 자료에서의 탄성파 진폭 감쇠 (Seismic attenuation from VSP data in methane hydrate-bearing sediments)

  • 송도 윤
    • 지구물리와물리탐사
    • /
    • 제10권1호
    • /
    • pp.29-36
    • /
    • 2007
  • 최근의 탄성파 탐사들은 퇴적층에 메탄 하이드레이트가 존재할 경우 탄성파 진폭 감쇠에 큰 영향을 미치는 것을 보여주고 있다. 이 논문에서는 일본 중부 토카이(Tokai) 해역의 난카이 트러프 (Nankai Trough) 탐사정에서 얻은 수직탄성파자료를 이용하여 30$\sim$110 Hz 주파수 대역에서 메탄 하이드레이트 부존층에서의 P 파 감쇠를 측정하였다. 두 개의 다른 측정방법들 (스펙트럼비 (spectral ratio) 방법과 중심 주파수 이동방법 (centroid frequency shift method))을 이용하여 감쇠 측정의 유효성을 조사하였다. 또한 감쇠 측정의 안정성을 증명하기 위해 측정 심도구간, 시추공의 불규칙 변화, 주파수 구간에 따른 감쇠 분석의 민감도를 조사하였다. 탄성파 주파수 대역에서는 메탄 하이드레이트 부존층에서 P 파의 큰 진폭 감쇠는 발견되지 않았다. 육안으로 보기에는 탄성파 주파수 대역에서의 최대 감쇠는 저포화도의 가스층에 발생한다. 그와는 반대로 같은 시추공에서 얻어진 음파검층의 주파수 대역 $(10{\sim}20\;kHz)$에서는 가장 높은 P 파의 진폭 감쇠가 메탄 하이드레이트 부존층과 관련이 있었다. 그러므로 이 연구는 메탄 하이드레이트 부존 퇴적층의 진폭 감쇠가 주파수에 의존함을 보여주고 있다. 메탄 하이드레이트 부존층은 탄성파 주파수 대역보다는 음파검층 주파수 대역에서 진폭 감쇠를 유발함을 알 수 있다. $30{\sim}110\;Hz$의 탄성파 주파수 대역이 메탄 하이드레이트 부존에 영향을 받지 않는 이유 중의 하나로서 메탄 하이드레이트 지역의 얇은층 들로 이루어진 층서구조의 영향을 제시하였다.

라만 형광 분광법을 이용한 PSC 박스교 인장케이블 응력측정방법 연구 (Non-contact Stress Measurement in Steel Member of PSC Box Bridge Using Raman Spectroscopy)

  • 김종우;김남규
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제23권2호
    • /
    • pp.130-134
    • /
    • 2019
  • 본 논문에서는 레이저기반 응력측정을 위한 비접촉식 로드셀을 개발을 위하여, 실내실험을 통하여 기술을 검증하고, 실규모 실험을 통하여 문제점을 파악하였으며, 최종적으로 현장적용에 적합한 응력측정용 비접촉식 로드셀 프로토타입을 개발하였다. 이를 위하여, 중심공 압축타입의 로드셀 제작에 사용되는 로드셀 몸체 표면에 용사코팅기술을 이용하여 알루미나를 도포하고, 레이저를 기반으로한 압분광법을 이용하여, 비접촉식으로 응력을 계측하였다. 이때, 인가되는 응력과 스펙트럼 이동간의 관계가 선형임을 확인하였다. 해당 기술의 현장 적용성 확인을 위하여, 실규모 프리스트레스 콘크리트 시편을 제작하고, 레이저를 조사하여 인가된 응력을 확인하는 과정에서, 반복적인 상황 하에서 레이저 조사 위치가 동일해야 함을 확인하였다. 이를 보완하기 위하여 프로브를 고정할 수 있는 케이싱이 포함된 로드셀 프로토타입을 제작하였고, 실내일축압축시험을 통하여 압축력과 스펙트럼 이동간의 선형성을 확인하였다. 따라서, 본 연구를 통하여 개발된 비접촉식 로드셀을 이용하여, 압축력을 효과적으로 측정할 수 있을 것으로 기대된다.

Design of the Artificial Antenna System in Photosynthesis

  • Tamiaki, Hitoshi;Yagai, Shiki
    • Journal of Photoscience
    • /
    • 제9권2호
    • /
    • pp.66-69
    • /
    • 2002
  • Zinc chlorin 1 possessing tertiary 3$^1$_hydroxy and 13$^1$-oxo groups was synthesized as a model for the antenna chlorophylls of photosynthetic green bacteria. Self-aggregation of 1 in nonpolar organic solvents was examined and compared to 2 and 3 possessing a secondary and primary 3$^1$_hydroxy group, respectively. Zinc chlorin 1 self-aggregated in I%(v/v) CH$_2$Cl$_2$-hexane to form oligomers and showed a red-shifted Qy maximum at 704 nm compared to the monomer (648 nm in CH$_2$CI2$_2$). This red-shift is larger than that of 3$^1$S-2 (648 to 697 nm) and comparable to that of3$^1$R-2 (648 to 705 nm), but smaller than that of 1 (648 to 740 nm), indicating that while a single 3$^1$-methyl group (primary to secondary OH) suppressed tight and/or extended aggregation, the additional 3$^1$-methyl group (secondary to tertiary OH) did not further suppress aggregation. The relative stability of the aggregates was in the order 3> 3$^1$R-2∼ 1 > 3$^1$S-2 as determined by visible spectral analyses. Molecular modeling calculations on oligomers of zinc chlorins 1, 3$^1$ R-2 and 3 gave similar well-ordered energy-minimized structures, while 3 stacked more tightly than 3$^1$ R- 2 and 1. In contrast, 3$^1$S-2 gave a relatively disordered (twisted) structure. The calculated oligomeric structures could explain the visible spectral data of 1-3 in nonpolar organic solvents. Moreover, self- aggregation of synthetic zinc 13$^1$_oxo-hlorins 4-6 possessing a 2-hydroxyethyl, 3-hydroxypropyl and 3- hydroxy-I-propenyl group at the 3-position in nonpolar organic solvents was discussed.

  • PDF

Response of a frame structure on a canyon site to spatially varying ground motions

  • Bi, Kaiming;Hao, Hong;Ren, Weixin
    • Structural Engineering and Mechanics
    • /
    • 제36권1호
    • /
    • pp.111-127
    • /
    • 2010
  • This paper studies the effects of spatially varying ground motions on the responses of a bridge frame located on a canyon site. Compared to the spatial ground motions on a uniform flat site, which is the usual assumptions in the analysis of spatial ground motion variation effects on structures, the spatial ground motions at different locations on surface of a canyon site have different intensities owing to local site amplifications, besides the loss of coherency and phase difference. In the proposed approach, the spatial ground motions are modelled in two steps. Firstly, the base rock motions are assumed to have the same intensity and are modelled with a filtered Tajimi-Kanai power spectral density function and an empirical spatial ground motion coherency loss function. Then, power spectral density function of ground motion on surface of the canyon site is derived by considering the site amplification effect based on the one dimensional seismic wave propagation theory. Dynamic, quasi-static and total responses of the model structure to various cases of spatially varying ground motions are estimated. For comparison, responses to uniform ground motion, to spatial ground motions without considering local site effects, to spatial ground motions without considering coherency loss or phase shift are also calculated. Discussions on the ground motion spatial variation and local soil site amplification effects on structural responses are made. In particular, the effects of neglecting the site amplifications in the analysis as adopted in most studies of spatial ground motion effect on structural responses are highlighted.

Simple Spectral Calibration Method and Its Application Using an Index Array for Swept Source Optical Coherence Tomography

  • Jung, Un-Sang;Cho, Nam-Hyun;Kim, Su-Hwan;Jeong, Hyo-Sang;Kim, Jee-Hyun;Ahn, Yeh-Chan
    • Journal of the Optical Society of Korea
    • /
    • 제15권4호
    • /
    • pp.386-393
    • /
    • 2011
  • In this study, we report an effective k-domain linearization method with a pre-calibrated indexed look-up table. The method minimizes k-domain nonlinear characteristics of a swept source optical coherence tomography (SS-OCT) system by using two arrays, a sample position shift index and an intensity compensation array. Two arrays are generated from an interference pattern acquired by connecting a Fabry-Perot interferometer (FPI) and an optical spectrum analyzer (OSA) to the system. At real time imaging, the sample position is modified by location movement and intensity compensation with two arrays for linearity of wavenumber. As a result of evaluating point spread functions (PSFs), the signal to noise ratio (SNR) is increased by 9.7 dB. When applied to infrared (IR) sensing card imaging, the SNR is increased by 1.29 dB and the contrast noise ratio (CNR) value is increased by 1.44. The time required for the linearization and intensity compensation is 30 ms for a multi thread method using a central processing unit (CPU) compared to 0.8 ms for compute unified device architecture (CUDA) processing using a graphics processing unit (GPU). We verified that our linearization method is appropriate for applying real time imaging of SS-OCT.

RF-CBTC 시스템을 위한 ISM 대역에서의 CPSK 송신기의 설계 및 성능분석 (Design and Performance Analysis of CPSK Transmitter for RF-CBTC System in ISM Band)

  • 김성철
    • 한국ITS학회 논문지
    • /
    • 제16권5호
    • /
    • pp.152-161
    • /
    • 2017
  • CBTC의 통신기술은 IEEE 802.11.x 표준을 사용하고 있으며 ISM밴드 대역중 하나인 2.4GHz를 사용하게 된다. 따라서 CBTC 철도 무선시스템으로서는 통신 지연, 통신 왜곡 및 정보 손실 등이 발생 할 수 있다. 이러한 문제를 극복하기 위해 ISM 대역중 908MHz 일정진폭을 갖는 직접 시퀀스 확산스펙트럼 송신기를 제안하였다. 성능 분석을 위해 주요파라미터인 아이 다이아그램과 scatter diagram을 고려하여 특성 분석을 하였다. 또한 국부발진 신호의 위상잡음 특성은 약 60dBc/Hz로서 기준신호와 비교 시 특성이 상당히 우수함을 알 수 있었다. 또한 2차 국부 발진 신호의 기준 주파수 억압이 50dB이하가 됨을 알 수 있었다. 제안한 변조방법에서 보조신호는 양과 음의 발생확률을 균일하게 함으로써 출력스펙트럼에서의 선스펙트럼성분에 의한 간섭을 제거하였으며 비선형 증폭기를 통과한 후의 스펙트럼의 측대파의 재생율이 현저히 줄어들었음을 볼 수 있었다.

Si(100) 표면에 대한 plasma 처리 효과 (Effects of plasma processes on the surface of Si(100))

  • 조재원;이재열
    • 한국진공학회지
    • /
    • 제8권1호
    • /
    • pp.20-25
    • /
    • 1999
  • 여러 가지 방법의 plasma 표면 처리와 산화 공정이 $SiO_2-Si$(100) 계면에 미치는 물리적 영향을 angle resolved uv-photoelectron spectroscopy(ARUPS)를 이용하여 연구하였다. 표면은 ex situ 방법과 함께 in situ 수소 플라즈마를 이용하여 처리되어 졌으며, 이것은 고진공 고온 열 처리 방법과 비교되어졌다. ARUPS 빛띠 상에 나타난 산화물 가전자 띠에 대한 특징적인 peak 위치는 표면 처리 및 산화 공정 방법에 따라 이동하였다. 이러한 peak의 이동은 Si에서의 띠휨에 의한 것으로 분석되어졌다. 또한 peak 이동의 원인으로 Si-SiO2 계면에 형성된 결점과 표면 처리 공정에 따라 달라지는 표면 거칠기 등을 고려할 수 있었다. 여러 공정에 대한 ARUPS 결과를 비교함으로써 $Si--SiO_2$(계면 결합이 표면 처리 및 산화 방법에 깊이 관련되어 있음을 결론지을 수 있었다. 산소 plasma 공정은 가장 작은 band bending을 보여주었다.

  • PDF

Investigation of the Performance of Spectral Domain Optical Doppler Tomography with High-speed Line Scanning CMOS Camera and Its Application to the Blood Flow Measurement in a Micro-tube

  • Park, Cheol Woo;Lee, Changho;Lim, SooHee;Ni, Aleksey;An, Jin Hyo;Lee, Ho;Bae, Jae Sung;Kim, Jeehyun
    • Journal of the Optical Society of Korea
    • /
    • 제16권2호
    • /
    • pp.174-180
    • /
    • 2012
  • In this study, the feasibility of spectral domain optical Doppler tomography for measuring blood flow characteristics in a micro-tube was demonstrated through several experiments. The use of an SD-ODT system in blood flow measurement can provide high resolution images (5 microns resolution). We prepared three capillary tubes to reveal the effect of different concentrations of hematocrit ratio (HR). One tube serves as the control. The two other tubes contained different concentrations of HR (5%, 25%). Three different capillary tube inlet flow velocities were tested in the present study. The Reynolds number (Re) which is based on the capillary tube inner diameter ranges from Re=6 to 48. We calculated a Doppler shift of the power spectrum of the temporal interference fringes with Kasai autocorrelation function to achieve the velocity profile of the flow. As a result, SD-ODT systems could not detect the cell depletion layer in the present study due to the limitation of spatial resolution. Nevertheless, these systems were proven to be capable of observing the RBCs of blood.

광파이버 브래그 격자형 무게 센서에 관한 연구 (A Study on n FBG Weight Sensor)

  • 이종윤;정진호
    • 한국산학기술학회논문지
    • /
    • 제8권4호
    • /
    • pp.721-725
    • /
    • 2007
  • 무게 센서를 기본으로 한 광파이버는 무게에 민감한 파이버 브래그 격자를 이용한 구조로 되어있다. FBG 본래의 특성을 이용한 센싱과 광파이버 브래그 격자를 통하여 스트레인 효과를 기본으로 하였다. 무게 레벨의 직접적인 표시는 센싱 물질의 팽창으로 말미암아 브래그 파장의 천이에 의하여 알 수 있다. FBG의 동작은 스트레인과 온도에 매우 민감하게 만들기 위해서 본래의 특성에 의한 것으로 특별한 필터와 같다. 이러한 센싱 원리는 무게를 인가한 것으로 FBG를 통해서 스트레인 효과를 기본으로 한 것이다. 실험 구성은 센서의 무게 응답특성을 초기 연구를 통해 이용하였다. 센서로부터 투과된 신호는 0.4nm의 분해능 대역폭을 가지며 광 스펙트럼분석기를 이용하여 관찰하였다. 본 논문에서는 무게에 따른 광파이버 브래그 격자의 중심 파장이 변화하는 것을 이용하는 동시에 작은 격자 부분에 무게로 영향을 주어 FBG의 스펙트럼 특성과 형태를 나타내었으며, 광파이버의 내구성이 사라졌을 때 파장과 스트레인 변화가 제거됨을 알 수 있었다. 즉, 무게에 의해 광파이버가 파괴되면 물리적인 손상을 입게 된다.

  • PDF

[ $T_2$ ]-relaxation Time Measurement of ex vivo $^1H$ MR Metabolite Peaks for Evaluation of Human Stomach Cancer

  • Mun Chi-Woong;Choi Ki-Sueng;Shin Oon-Jae;Yang Young-Ill;Chang Hee-Kyung;Hu Xiaoping;Eun Chung-Ki
    • 대한의용생체공학회:의공학회지
    • /
    • 제27권2호
    • /
    • pp.53-58
    • /
    • 2006
  • In this study, transverse relaxation time (T2) measurement and the evaluation of the characteristics of the spectral peak related to stomach tissue metabolites were performed using ex vivo proton magnetic resonance spectroscopic imaging (MRSI) at 1.5-T MRI/S instruments. Thirty-two gastric tissues resected from 12 patients during gastric cancer surgery, of which 19 were normal tissue and 13 were cancerous tissue, were used to measure the $T_2$ of the magnetic resonance spectroscopy (MRS) peaks. The volume of interest data results from the MRSI measurements were extracted from the proper muscle (MUS) layer and the composite mucosa/submucosa (MC/SMC) layer and were statistically analyzed. MR spectra were acquired using the chemical shift imaging (CSI) point resolved spectroscopy (CSI-PRESS) technique with the parameters of pulse repetition time (TR) and echo times (TE) TR/(TE1,TE2)=1500 msec/(35 msec, 144 msec), matrix $size=24{\times}24$, NA=1, and voxel $size=2.2{\times}2.2{\times}4mm^3$. In conclusion, the measured $T_2$ of the metabolite peaks, such as choline (3.21ppm) and lipid (1.33ppm), were significantly decreased (p<0.01 and p<0.05, respectively) in the cancerous stomach tissue.