• 조명전기설비학회논문지
• /
• 제24권12호
• /
• pp.33-37
• /
• 2010

In this paper, we have demonstrated absolute wavelength tuning in an optical fiber comb filter based on a polarization-diversity loop configuration by controlling the current injected into enameled wires wound on polarization-maintaining fibers (PMF's), that is, adjusting Joule heat generated from enameled wires. The proposed fiber comb filter consists of a polarization beam splitter, a half-wave plate, a quarter-wave plate, and PMF's. And we observed wavelength change of spectral dips in transmission spectra of the fabricated filter by varying an input current applied to enameled wires. The absolute wavelength of the filter could be controlled in proportional to the square of the input current with good linearity, and the rate of the wavelength shift with respect to the input current was measured as 36.79[nm/$A^2$].

• 한국염색가공학회지
• /
• 제20권5호
• /
• pp.23-27
• /
• 2008

In this work, poly(diallyldimethylammoniumchloride) (PDDAC) and meso-tetrakis(4-carboxyphenyl)porphyrin were considered to produce the self-assembly fabrication films. This method is based on the layer-by-layer (LbL) deposition produced by the electrostatic attraction between positively charged PDDAC and negatively charged porphyrin ions. The result of multilayer fabrication was discussed with the level of color strength (K/S). K/S spectra of the fabricated multilayer films showed gradual increase behaviors. In addition, the color photo images of the fabricated multilayer films showed that PDDAC and porphyrin were successfully attracted by electrostatic self-assembly forces.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 추계학술발표회 논문집
• /
• pp.23-27
• /
• 1986

In this paper, The loss spectra between 1.1um and 1.7um were measured by cut-back method using tungsten-halogen lamp, a grating monochramator and an InGaAs detector. Typical fiber lengths measured were 30 meter. This result represent a further contribution to monomode fiber design and has been applied to come common profimes that are under study to optimize the fiber performance. It is very important that the parameter a. were designed more exactly and transmission of LPol mode in 1.55um. Therefore, Fiber designer have to be aware of the fact that this coupling loss and bending loss.

• 한국염색가공학회지
• /
• 제10권2호
• /
• pp.8-17
• /
• 1998

In this study we have examined electroless chemical plating on the plasma grafted poly [ethylene terephathalate］(PET) fabric in order to improve the interfacial adhesion between metal and fiber. The vapour phase of acrylic acid introduced on the PET surface and the graft polymerization was carried out by using cold plasma, resulting in the grafting yield of 0.8-1.3 wt％. The carboxyl group of the plasma grafted was identified by FT-IR-ATR spectra. The Interfacial adhesion was related to the carboxyl group. After electroless chemical plating of nickel, it showed that the more the carboxyl, the better the interfacial adhesion. Comparing to the untreated, the plasma grafted fabric showed fairly good interfacial adhesion(5B grade, ASTM D3359) . The shielding effect of electromagnetic wave showed 95dB. The shielding effect depends on the fabric structure, the surface structure, and the cross sectional shape of fibers. The dense fabric structure, the etched surface like a microcrater, and the trigonal cross sectional shape were prefered.

• 한국염색가공학회지
• /
• 제9권5호
• /
• pp.10-18
• /
• 1997

In order to study the properties of safflower yellow colors, thermodynamic parameters and dyeing properties on the silk in several dyeing conditions were investigated. The uv-visible spectra of safflower yellow colors in several solvents show hypsochromic shift with the polarity of solvent but bathochromic shift with increasing acidity of solution. The apparent diffusion coefficients and standard affinities of dyeing increased with the increase of dyeing temperature. The standard heat of dyeing(${\Delta}H^0$), entropy change(${\Delta}S^0$) and activation energy($E_{act}$) were calculated to be - 1.144kcal/mol, -7.498(5$0^{\circ}C$)~-3.804(9$0^{\circ}C$)cal/molㆍdeg and 0.123kcal/mol, respectively. The concentration of safflower yellow colors in the silk fiber increased with dyeing temperature, time, concentration of colors and acidity of initial dyebath. Silk fabrics were dyed bright yellow by pre-mordanting with tin chloride. Lightfastness of silk fabrics pre-mordanted by tin chloride was not excellent.

• 한국식품조리과학회지
• /
• 제19권1호
• /
• pp.79-82
• /
• 2003

Volatile compounds in Elsholtzia splendens were extracted by solid phase microextraction (SPME). Two kinds of SPME fiber, carboxen/polydimethylsiloxane (CAR/PDMS) and polydimethylsiloxane (PDMS) were used to determine the selectivity of the fibers to the different flavor compounds present in the Elsholtzia splendens. Identification of volatile compounds was based on the linear retention indices (RI) and the comparison of their mass spectra with those of on-computer library. Thirty compounds were identified in the volatile compounds extracted by CAR/PDMS fiber, including 1 aldehyde, 5 alcohols, 3 hydrocarbons, 17 terpene hydrocarbons, 3 ketones and 1 miscellaneous. And 5 alcohols, 3 hydrocarbons, 18 terpene hydrocarbons, 3 ketones and 2 miscellaneouses were identified in PDMS fiber. These results suggested that the selectivity of PDMS fiber was similar to that of CAR/PDMS fiber in Elsholtzia splendens. The major volatile compounds were naginataketone and elsholtziaketone in Elsholtzia splendens.

• Fibers and Polymers
• /
• 제6권2호
• /
• pp.108-112
• /
• 2005

Nanocomposite films were prepared by casting the solution of polyacrylonitrile (PAN) and single wall nanotube (SWNT) in nitric acid subsequent to sonication. Even though SWNT shows good dispersion visually, the reinforcing effect was not satisfactory. The G-band Raman spectra of the drawn film clearly demonstrated that SWNTs in the film are well-oriented along the drawing axis of the film. The electrical resistivity of the film prepared using nitric acid was lower than that of the film using DMF. Thus, nitric acid is presumably more effective in dispersing nanotubes than DMF.

• Fibers and Polymers
• /
• 제1권2호
• /
• pp.71-75
• /
• 2000

Intermolecular cyclization of 2-alkylamino-3-chloro-5,6-dicyanopyrazine 2 in the presence of tributylamine in N,N-dimethylformamide (DMF) gave 5,10-disubstituted-2,3,7,8-tetracyano -5,10-dihydrodipyrazino〔2,3-b:2',3'-e]pyrazines 3, which showed strong mesomorphic property and were anticipated as new chromophoric system for functional dye materials. Absorption spectra, fluorescent properties and other physical properties were correlated with their chemical structures. Vanadyl oligomeric porphyrazine with long alkyl groups synthesized from 3 had satisfactory solubility in tetrahydrofuran (THF), diethyl ether and dimethylsulfoxide (DMSO). The syntheses and characterization of vanadyl polymeric porphyrazines derived from 3 with long alkyl groups are reported.

• Journal of the Optical Society of Korea
• /
• 제8권4호
• /
• pp.156-162
• /
• 2004

The spectroscopic model is proposed to analyze the gain bandwidth of a fiber Raman amplifier (FRA) with a multiple wavelength pumping scheme based on Raman gain theory. The oscillatory lineshape, which is the analytic function to analyze Raman gain spectra, allows us to estimate the gain bandwidth of the FRA. Based on the proposed theoretical modeling, we design and analyze the characteristics of the FRA using the combined multiwavelength pumping sources. We achieved the extended gain bandwidth of the FRA over 80 nm with the small gain ripple less than 0.5 dB. Threshold pumping power and effective noise figure for the FRA can be also analyzed by using the proposed model, which is also applicable for versatile fibers with other doping materials. The proposed analysis method can be useful for the design of FRA with the multiwavelength pumping scheme.

• 한국염색가공학회지
• /
• 제12권6호
• /
• pp.396-403
• /
• 2000

The purpose of this study was to investigate the dyeing properties of silk, wool, nylon and poly(ethylene teraphtlate)〔PET〕 fabrics dyed with Tumeric(Curcuma longa) extracts. The dyeing property and color fastness were investigated by using the extracts and the post mordanting with Aluminum, Copper and Iron salts. In the UV-visible spectra, the maximum absorption of wavelength of the extract with methyl alcohol appeared at 420nm, and that of the extract with distilled water was at 415nm. Increasing the dyeing temperature, the K/S values of dyed fabrics were increased. The optimum dyeing condition was 30∼60 minute of dyeing time at pH 5∼5.6. Surface colors of silk and wool became dark by using mordants compared to those of nylon and PET fabrics. The drycleaning fastness of fabrics dyed with the extracts was good. The laundering and light fastness were improved by using mordants.