• 제목/요약/키워드: Specific energy input

검색결과 116건 처리시간 0.032초

인구 고령화가 에너지 사용과 탄소 배출에 미치는 영향 (The Impact of Population Aging on Energy Use and Carbon Emissions in Korea)

  • 김동구;박선영
    • 환경정책연구
    • /
    • 제13권2호
    • /
    • pp.99-129
    • /
    • 2014
  • 한국의 인구 고령화가 가계소비구조의 변화를 통해 에너지 사용과 탄소 배출에 어떠한 영향을 미치는지를 2035년까지 에너지원별 산업부문별로 전망하였다. 이를 위해 가구주 연령별 소비지출구조를 통해 산출된 가계소비지출의 양상 변화를 에너지 및 환경 산업연관표에 연계하여 분석하였다. 분석 결과에 따르면, 인구 고령화에도 불구하고 가계 소비지출로 인해 유발되는 에너지 사용량과 탄소 배출량은 2026년까지 증가세를 지속하며, 이후에도 상당 기간 높아진 에너지 사용 및 탄소 배출 수준을 유지할 것으로 전망된다. 에너지원별로는 천연가스 사용량의 증가가 두드러지는 반면, 원유 사용량은 상대적으로 이른 시기에 하락세로 돌아서는 것으로 분석된다. 산업부문별로는 주로 고령가구의 소비 비중이 높은 의료보건, 주거광열, 농림수산품 및 식품 등의 부문에서는 탄소배출량 증가가 두드러지나, 교육, 교통, 외식, 외박 등의 부문에서는 탄소배출량이 상대적으로 빨리 감소세로 전환될 전망이다. 아울러 최근 인구 고령화에 대비해 도입 논의가 활발한 기초연금제도와 유사한 정책 도입 시 에너지 사용과 탄소 배출에 어떠한 영향을 미치는지에 대해서도 정책시뮬레이션으로 분석하였다.

  • PDF

다단 혼 형태의 초음파 장비를 이용한 초음파 화학적 효과 연구 (Sonochemical Effects using Multi-stepped Ultrasonic Horn)

  • 최종복;이성은;손영규
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제25권4호
    • /
    • pp.58-66
    • /
    • 2020
  • Since the typical horn-type ultrasonic equipment induces a reaction at the probe tip, the sonochemical reaction has a limitation that it occurs only in a specific area. As one of the ways to overcome this limitation, an ultrasonic device with multi-stepped horn equipped with several oscillators has been developed. The objective of this study was to investigate the sonochemical effects induced by acoustic cavitation system in 20 kHz multi-stepped ultrasonic horn using calorimetry, KI dosimetry and the luminol test. The sonochemical effects of multi-stepped ultrasonic horn were compared with that of the typical horn-type 20 kHz ultrasonic device. The effect of immersion depth and power on the sonochemical reaction was investigated in the ultrasonic system with multi-stepped ultrasonic horn. Higher calorimetric energy was obtained at higher immersion depth and power conditions. Sonochemical effects increased significantly when using the high immersion depth and input power. However, as the input power increased, the cavitation reaction zone concentrated around the ultrasonic horn. Additionally, the experiments to examine the effect of liquid temperature was conducted. The smaller sonochemical reaction was obtained for the higher liquid temperature. The effect on temperature seems to be closely related to liquid conditions such as viscosity and vapor pressure of water.

덕적도 지형을 고려한 소형풍력발전기 발전량 평가 (Evaluation of Energy Production for a Small Wind Turbine by Considering the Geometric Shape of the Deokjeok-Do Island)

  • 장춘만;이상문;전완호;임태균
    • 한국수소및신에너지학회논문집
    • /
    • 제25권6호
    • /
    • pp.629-635
    • /
    • 2014
  • This paper presents annual energy production (AEP) by a 1.5kW wind turbine due to be installed in Deokjeok-Do island. Local wind data is determined by geometric shape of Deokjeok-Do island and annual wind data from Korea Institute of Energy Research at three places considered to be installed the wind turbine. Numerical simulation using WindSim is performed to obtain flow pattern for the whole island. The length of each computation grid is 40 m, and k-e turbulence model is imposed. AEP is determined by the power curve of the wind turbine and the local wind data obtained from numerical simulation. To capture the more detailed flow pattern at the specific local region, Urumsil-maul inside the island, fine mesh having the grid length of 10m is evaluated. It is noted that the input data for numerical simulation to the local region is used the wind data obtained by the numerical results for the whole island. From the numerical analysis, it is found that a local AEP at the Urumsil-maul has almost same value of 1.72 MWh regardless the grid resolutions used in the present calculation. It is noted that relatively fine mesh used for local region is effective to understand the flow pattern clearly.

수분주입량에 따른 압출성형 옥수수 섬유질의 물리화학적 특성 (Effects of Feed Moisture on the Physicochemical Properties of Extruded Corn Fibers)

  • 김철현;류기형
    • 한국식품영양과학회지
    • /
    • 제42권3호
    • /
    • pp.427-433
    • /
    • 2013
  • 본 연구는 옥수수 섬유질을 수분주입량의 변화에 따라 압출성형 옥수수 섬유질과 탈전분 압출성형 옥수수 섬유질의 물리화학적 특성 변화를 측정하였다. 원료의 수분주입량은 30, 40, 50%로 조절하였으며 스크루 회전속도와 사출구 온도는 각각 200 rpm, $140^{\circ}C$로 고정시켜 압출성형 하였다. 일반성분 함량은 원료에 비해 감소하였으며, 수분주입량이 30%일 때 옥수수 섬유질과 탈전분 옥수수 섬유질의 불용성 식이섬유 함량은 감소하고 수용성 식이섬유 함량은 증가하였다. 압출성형 옥수수 섬유질의 비기계적 에너지, 직경팽화율, 밀도, 파괴력, 탄성계수는 수분함량이 증가할수록 감소하였고, 비길이는 증가하였다. 압출성형 옥수수 섬유질의 수분흡착지수와 환원당은 수분주입량이 증가할수록 변화가 없었으며 수분용해지수는 감소하였다. 반면에 탈전분 옥수수 섬유질의 수분흡착지수는 감소하고 수분용해지수와 환원당은 증가하였다. 수분주입량 30%일 때 유용성분의 추출이 미량 증가하는 것으로 보아 압출성형공정의 적용하여 섬유질에 포함된 유용성분의 추출이 용이할 것으로 생각된다.

부문 분리된 산업연관표 추계방법 (A Method for Estimating Input-output Tables with Disaggregated Sector)

  • 정기호
    • 자원ㆍ환경경제연구
    • /
    • 제31권4호
    • /
    • pp.849-864
    • /
    • 2022
  • 본 연구는 에너지 및 환경경제학에서 기초 데이터로 많이 활용되는 산업연관표에서 특정 부문이 하부 부문들로 분리되는 경우 새로운 산업연관표를 추계하는 과정을 제시하였다. 보편적으로 산업연관표 추계에 이용되는 RAS 방법은 새로운 산업연관표의 부문별 생산액, 중간투입계, 중간수요계의 정보를 반드시 필요로 하지만, 많은 경우에 부문별 중간수요계 정보를 확보하기 어렵다는 문제가 있다. 본 연구는 특정 부문이 하부 부문들로 분리되는 상황에서 부문별 중간수요계 정보를 사용하지 않고도 새로운 산업연관표를 추계할 수 있는 과정을 제시하였다. 핵심 아이디어는 분리 후 산업연관표의 많은 원소들의 값이 분리 전 산업연관표의 원소들 값과 같다는 점과 분리 후 부문들의 원소 합이 분리 전 부문의 원소 값과 같다는 점이다. 중간수요계 정보 대신에 이들 정보를 이용해서 부문 분리 후의 산업연관표에 대한 중간거래행렬이나 투입계수행렬을 추계하는 과정을 제시하였다. 소규모 시뮬레이션 결과, 본 연구가 제시한 과정은 투입계수행렬의 경우 평균 약 11.23%의 추정 오차를 가지며 이것은 중간수요계 정보를 활용하는 RAS의 11.30%의 평균 추정 오차보다 작은 것으로 나타났다. 그러나 여러 선행연구들에서 추가 정보를 활용하는 것이 활용하지 않는 것보다 추정 성과를 항상 향상시키지 않는 것으로 나타났기 때문에, 본 연구의 방법을 현실에 적용하기 위해서는 다양한 시뮬레이션 연구가 필요하다고 판단된다.

저압용 서지 보호 장치(SPD)의 보호 거리 해석 (Analysis of the Protective Distance of Low-Voltage Surge Protective Device(SPD) to Equipment)

  • 이정우;오용택
    • 조명전기설비학회논문지
    • /
    • 제26권4호
    • /
    • pp.28-34
    • /
    • 2012
  • Installing surge protection devices for a low-voltage system is important to ensure the survival of electric or electronic devices and systems. If surge protection devices (SPD) are installed without consideration of the concept of lightning protection zones, the equipment to be protected might be damaged despite the correct energy coordination of SPDs. This damage is induced by the reflection phenomena on the cable connecting an external SPD and the load protected. These reflection phenomena depend on the characteristics of the output of the external SPD, the input of the loads, and the cables between the load and the external SPD. Therefore, the SPD has an effective protection distance under the condition of the specific load and the specific voltage protection level of SPD. In this paper, PSCAD/EMTDC software is used to simulate the residual voltage characteristics of SPD Entering the low-voltage device. And by applying a certain voltage level, the effective protection distances of SPD were analyzed according to the each load and length of connecting cable, and the effectiveness of SPD were verified.

신재생에너지의 R&D 생산성과 배출권거래제의 연관관계 분석: OECD 특허데이터를 중심으로 (The Analysis on the Relationship between R&D Productivity of Renewable Energy and Emission Trading Scheme; Using OECD Patent Data)

  • 김수이
    • 자원ㆍ환경경제연구
    • /
    • 제22권1호
    • /
    • pp.53-76
    • /
    • 2013
  • 본 연구는 신재생에너지의 R&D 생산성과 배출권거래제의 연관관계를 OECD의 국가별 특허건수와 R&D 투입액 데이터를 사용하여 분석하였다. 즉 배출권거래제의 실시 전후하여 이러한 R&D 생산성이 실질적으로 향상되었는지를 살펴봄으로써 배출권거래제가 신재생에너지 연구개발 성과를 촉진하였는지를 계량경제학적으로 분석한 것이다. 본 연구에 사용한 분석 방법은 Hausman et al. (1984)가 제시한 Negative Binomial Models을 사용하였다. 분석결과에 의하면 배출권거래제가 신재생에너지의 R&D생산성을 향상시키는 것으로 나타났으며, 이는 99%의 신뢰구간에서 유의한 것으로 나타났다. 또한 부속서 I국가인가의 여부가 신재생에너지의 R&D생산성을 더욱 촉진하는 것으로 나타났다. 본 연구는 단순한 신재생에너지에 대한 연구개발투자의 상호 비교를 통하여 시사점을 도출하기 보다는 실질적인 R&D 생산성을 배출권거래제와 상호 연계하여 분석하였다는 점에서 의의가 있다.

Construction and Evaluation of Scaled Korean Side Impact Dummies

  • Kim, Seong-Jin;Kwon Son;Park, Kyung-Hyun
    • Journal of Mechanical Science and Technology
    • /
    • 제17권12호
    • /
    • pp.1894-1903
    • /
    • 2003
  • It is necessary to have a dummy that describes the anthropometry of a victim with accuracy. This study presents three scaled side impact dummies constructed for the use of MADYMO. They represent five, fifty and ninety-five percentile Korean males ranged from the age of 25 through 39. Thirty-five anthropometric data were used to scale input files required for MADYSCALE. Geometries, inertia, joints and other parameters for dummies were scaled based on the configurations of EuroSID-1. This study proposes the lateral impact response requirements for head, thorax and pelvis of Korean side impact dummies. A lateral drop impact test was conducted for the head at the height of 200 mm. Lateral pendulum impact tests were also carried out for thorax and pelvis at three specific impact velocities. All these test results were obtained from simulation based on MADYMO. All the procedures of the three tests followed the requirement of ISO/TR 9790.

Investigating Buck DC-DC Converter Operation in Different Operational Modes and Obtaining the Minimum Output Voltage Ripple Considering Filter Size

  • Babaei, Ebrahim;Mahmoodieh, Mir Esmaeel Seyed;Sabah, Mehran
    • Journal of Power Electronics
    • /
    • 제11권6호
    • /
    • pp.793-800
    • /
    • 2011
  • This paper investigates the operational modes of buck dc-dc converters and their energy transmission methods. The operational modes of such converters are classified in two types, discontinuous conduction mode (DCM) and continuous conduction mode (CCM). In this paper, the critical inductance relation of DCM and CCM is determined. The equations of the output voltage ripple (OVR) for each mode are obtained for a specific input voltage and load resistance range. The maximum output voltage ripple (MOVR) is also obtained for each mode. The filter size is decreased and the minimum required inductance value is calculated to guarantee the minimization of the MOVR. The experimental and simulation results in PSCAD/EMTDC prove the correctness of the presented theoretical concepts.

Enhanced performance at an early state of hydrocarbon selective catalyst reduction of NOx by atmospheric pressure plasma

  • Nguyen, Duc Ba;Heo, Il Jeong;Mok, Young Sun
    • Journal of Industrial and Engineering Chemistry
    • /
    • 제68권
    • /
    • pp.372-379
    • /
    • 2018
  • The improvement of $NO_x$ reduction by $Ag/{\gamma}-Al_2O_3$ with a hydrocarbon ($n-C_7H_6$) in the early state was investigated in a packed-bed dielectric barrier discharge plasma reactor. The results revealed that the combination of plasma with the catalyst enhanced $NO_x$ reduction efficiency at low operating temperatures, depending on the temperature and specific input energy. To sum up, the poor performance of the catalytic $NO_x$ reduction at low temperatures in the early stage before reaching thermochemical steady state can be greatly compensated for by using the atmospheric-pressure plasma generated in the catalyst bed.