• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.2
• /
• pp.203-208
• /
• 1999

An 8 week feeding trial was conducted with 864 ISA Brown laying hens, 48 weeks old, to determine if microbial phytase $(Natuphos^{(R)})$ supplementation can reduce non-phytate phosphorus (NPP) level in laying diets. The experiment consisted of four dietary treatments: T1, control diet with 0.26% NPP (0.55% total P) wand no supplementary phytase; T2, 0.21% NPP (0.50% total P) diet with 250 U of phytase/kg of diet; T3, 0.16% NPP (0.45% total P) diet with 250 U of phytase/kg of diet; and T4, 0.11% NPP (0.40% total P) diet with 250 U of phytase/kg of diet. T3 showed the highest egg production and egg weight and the lowest feed conversion while T4 gave the lowest egg production and the highest feed conversion and mortality. Daily feed consumption ranged from 130.4 g (T4) to 132.7 g (T2). T1 and T2 were not significantly different in the production parameters. Eggshell strength, egg specific gravity, and eggshell thickness were not significantly different among treatments. However, broken egg ratio was significantly lower in T2 and T4 than in T1. Retentions of Ca, P, Mg, and Cu were greater in phytase supplemented treatments (T2, T3, and T4) than the control (T1), and those in T3 and T4 were greater than in T2. Excretions of P in phytase supplemented treatments (T2, T3, and T4) were significantly (p<0.05) smaller than in T1 but excretions of N were not significantly different among the treatments. Contents of ash in tibiae were not significantly affected by treatments, but contents of Ca, P, Mg, and Zn was increased and that of Cu decreased by phytase supplementation. It is concluded that the NPP concentration in the diet of Brown layers consuming about 130 g/d of feed can be safely lowered from 0.26% (0.55% total P) to 0.16% (0.45% total P). The excretion of P was reduced by the inclusion of 250 U phytase/kg of diet.

• Resources Recycling
• /
• v.17 no.4
• /
• pp.47-56
• /
• 2008

The aim of this study is to produce cokes which can be used for the production of ferroalloy, for this purpose, domestic anthracite mixed with plastic was sintered at various condition. The combustion and physical properties of anthracite and plastic, coal separation, and the influence of factors on the strength of coke were investigated. The results of this study are as follows: 1. The three kinds of anthracite from the Samcheok region contained 25 to 30% ash of $100{\mu}m$ over size, and have the caloric value of 5,205 cal/g(TaeAn), 4,893 cal/g(JangSung), 4,873cal/g(KyongDong). 2. The recommendable conditions for heavy-fluid separation of the Samcheok coal are to set the specific gravity of heavy fluid to 2.4 and control the size of coal to $35{\sim}140mesh$. 3. It is concluded that phenolic resin powder, liquefied phenolic resin, SAN, and melamine resin can be used as a binder for the anthracite cokes, from the thermal analysis of various plastics. Especially, the liquefied phenolic resin was considered as the most suitable binder as it would simplify the process.

• Composites Research
• /
• v.12 no.5
• /
• pp.31-39
• /
• 1999

Glass-fiber reinforced polymeric composites provide the desitable properties of high stiffness and strength as well as specific weight. Hence, they have become some of the most important materials in several industries. These composites can be grouped into thermoplastic and thermoset composites, with thermoplastic composites having several advantages over thermoset composites in mechanical properties and processing. As a result, the study of the material behavior and forming techniques of such composites has attracted considerable attention in recent years. When the continuous fiber-reinforced polymeric composites are molded by flow molding, the molded parts leads to be nonhomogeneity and anisotropic because of the separation and orientation of fibers. As the characteristics of the products are greatly dependent on the separation, it is very important to clarify the separation in relarion to molding conditions, fiber mat structures and mold geometry. In this study, the effects of the mold geometry and the fiber mat structure on the compression moldability are studied using the cup-type molding.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.2
• /
• pp.109-112
• /
• 2014

A porous ceramic which has fine porosity and small specific gravity is made with Cenosphere and Ball Clay under condition of $1,250^{\circ}C$ in calcination temperature and 30 minutes of calcination time. The average size of porous ceramic was about $2.5{\times}10^{-5}$ m and pores are well developed. The void-fraction of porous ceramic was 67.1% under the input of Cenosphere and Ball clay with the weight ratio of 100 to 5. However, as weight ratio of Ball Clay increased to 20, 40, 100, the void fraction decreased to 58.4, 56.7, 47% respectively. When the weight ratio of Cenosphere and Ball Clay was 100 to 100, the apparent density of porous ceramic was $1.04g/cm^3$. which is twice the density when the weight ratio of Ball Clay was 5. On the other hand, absorption rate decreased by at least 100%. In condition of weight ratio of Cenosphere and Ball Clay was 100 to 100, compressive strength of porous ceramic was 30 (MPa), improve by about 76% or more when the weight ratio of Ball Clay was 5.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.2
• /
• pp.69-76
• /
• 2017

In the Korea, 80 percent of livestock manure were converted into compost and used as organic fertilizers. The livestock manure compost has two types of powder and pellet type (ID= 5~10 mm). The aim of this study was to investigate the properties of two types of cow manure compost pellet (cylinder and sphere type). Nitrogen concentrations of cylinder type and sphere type of compost pellets were 1.23 and 1.24%, respectively. There were similar with nitrogen concentration of cylinder and sphere types of compost pellets. As a result of analyzing the effect of granulation processing, it was found that the moisture content of the raw material was the most influential factor in the granulation processing in both of the processing types of the screw pressing method and the rotating cylinder method. When the cylinder and sphere types of compost pellets were dry to 20% of moisture content, the specific gravities of these compost pellets were 1.38 and 1.13, respectively. The compressive strength of cylinder type pellet and sphere type pellet were 27.6 and $11.3kg/cm^2$, respectively.

• Korean Journal of Food Science and Technology
• /
• v.47 no.4
• /
• pp.492-498
• /
• 2015

Testosterone deficiency syndrome (TDS) is normally observed in elderly men and is a clinical and biochemical syndrome, characterized by a decline in plasmic testosterone levels resulting in a significant decrease in quality of life. The aim of this study was to evaluate the effect of a mixed extract of fenugreek seeds and Lespedeza cuneata (YHM) on TDS. Rats were divided into three groups: the negative control, YHM-40 (40 mg/kg), and YHM-80 (80 mg/kg) groups. After 4 weeks of YMH administration, an increase was observed in the plasmic testosterone levels, vastus lateralis muscular strength, forced swimming time, total sperm counts, and motile sperm counts in YHM-40 and YHM-80 groups compared to the negative control group. Moreover, sex hormone binding globulin, the epididymal fat pad, total plasmic cholesterol, and triglyceride levels were significantly decreased in the YHM-fed groups. However, prostate specific antigen, aspartate aminotransferase, and alanine aminotransferase levels did not differ among the groups. These results suggest that YHM may enhance testosterone levels in elderly men and alleviate TDS without common side effects.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.1
• /
• pp.49-58
• /
• 2017

The phenomena that we experience in everyday life such as snow, rain, wind, and temperature are referred to as weather, and the average state of atmospheric phenomena that occur over a long period of time in a specific region is referred to as climate. In addition, significant variation of climate compared to the average state is referred to as climate change. Concrete structures can have various problems when exposed to elements. Among the problems, the freeze-thaw problem due to extreme climatic factors such as heavy rain and snowfall has become a particularly significant issue recently. The concrete that has been subjected to repeated freeze-thaw rather than too high or low temperature shows serious degradation of durability, and the performance of structures with degraded performance is difficult to recover. Therefore, in this study, concrete durability performance with respect to freeze-thaw from curing conditions change due to wind speed and sunshine exposure time. Concrete freeze-thaw experiment are performed. using wind speed and sunlight exposure time. Also, performance based evaluation through the satisfaction curve based on the freeze-thaw test results are performed.

• The Journal of the Korea Contents Association
• /
• v.12 no.7
• /
• pp.368-377
• /
• 2012

The comprehensive countermeasures against school violence recently announced by the government include some content on physical education classes. Physical education has long been ignored in school paradoxically in spite of the deteriorating physical strength and health of adolescents. The physical education subject undervalued in the middle of overly excessive competitions for college entrance exams finds its core goal in whole person education and officially emphasizes the development of personality aspects, which means that physical education claims important significance by providing diverse approaches to school violence prevention. This study thus set out to enhance the roles of physical education for school violence prevention. In Korean society, school violence has taken deep root due to the combined results of individual, family, school and community factors, the growth-first policy driven by compressed modern growth, and neoliberalism based on economic efficiency. School violence possesses such fixed value systems and convictions in Korean society. Education has failed to achieve some effectiveness because of the serious level of school violence, which calls for assessment of ideology having big impacts on educational environments. Given that it has been rediscovered that physical education has legitimacy of alleviating or preventing school violence through its value, an alternative to eradicate school violence should start with physical education normalization in school. Specific alternatives including the activation of sports clubs in school will be established as more fundamental practical alternatives when accompanied by the development of school violence-related programs and the operation of in-service training programs for physical education teachers.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.2
• /
• pp.181-192
• /
• 2013

Given both structural safety and economic benefits of aging facilities, remodelling of the existing facilities is preferable to reconstruction. This recognition provides an opportunity to reduce the commitment of resources and national budget. However, when a subordinate troop asks for remodeling or reconstruction of a deteriorated facility, it is difficult to ensure the consistency and objectivity in the process of decision making for the alternatives due to the absence of systematic and quantitative rating methodology. Their economic evaluation methodology only exists in a manual format. Thus, further research is required for converting the methodology into an automated system in view of practicality such as rapid and accurate data processing. The contributions of this study are as follows: 1) Literature review found out a representative economic evaluation model focused on military facilities, and comparative analysis with a similar study identified the strength and weakness. 2) this study presented how to convert the theoretical framework which enables to solve a specific subject matter into an automated system. 3) it developed a user friendly interfaces which consist of four functional modules by considering the usability and accessibility of the system user. 4) the developed system was verified by a case study in terms of four kinds of performance indicators.

• Fire Science and Engineering
• /
• v.24 no.4
• /
• pp.12-17
• /
• 2010

The purpose of this study is to determine how effectively waste tire recycled material mixed with flame retardant work in combating fire. As discovered in the previous study, waste tire mixed with cement mortar has more insulation capacity. However, this mortar is weak against fire. Therefore flame retardant, with a specific proportional mix, will be added to increase its fire prevention capacity. Tests will be made in accordance with ISO 5657 procedures for measuring fire ignition time, flame and shape variation of test pieces at the Building Material Test Institute. The test piece will be set up with horizontal levels having a constant radiation heat of $1{\sim}5W/cm^2$. Temperature transfers and increases from the surface into the interior. Combustible gases result due to pyrolysis, and regular contact is maintained between the fire source and the center of the test piece for assessment purposes. Ignition has not been occurred without adding retardant meaning that there is almost no possibility of ignition of waste tire particle. This fact can be considered as fire load to appreciate a volume of combustion materials. Flame is not occurred due to heat-absorbing effect by adding non-organic series retardant into waste tire particle. Conclusions have been summarized as follows; 1) Combustion of building material can be decreased by adding retardant to waste tire-mixing mortar. But compressive strength and insulation capacity of the material should be measured later. 2) Firing prevention and ignition are main points of building fire. Reasonable fire engineering assessment of interior material should be made for establishing effective disaster prevention system.