• Journal of the Korean Wood Science and Technology
• /
• 제18권3호
• /
• pp.6-16
• /
• 1990

The objectives of this study were to investigate the relative effects of specific gravity and particle size on internal bond and tensile strengths and fracture toughness of particleboard and to compare mechanical strength with fracture toughness. The particleboard was manufactured with three different particle sizes at specific gravity levels of 0.6, 0.7, and 0.8 with a resin content of 10% based on oven dry weight. The results were summarized as follows: 1. Internal bond strength. fracture toughness in internal bond test. maximum tensile strength, and fracture toughness in tension test increased with the increase of specific gravity of particleboard. 2. As partcle size increased, internal bond strength, fracture toughness. maximum tensile strength. and fracture toughness in tension test increased. 3. The maximum tensile strength and fracture toughness appeared to be in a direct relationship, and then maximum tensile strength could be used for predicition of fracture toughness for tension test. 4. The fracture toughness in internal bond test was somewhat independent on induced crack length.

• International Journal of Concrete Structures and Materials
• /
• 제7권4호
• /
• pp.287-293
• /
• 2013

Strength and some durability properties of concrete containing rice husk ash (RHA) predominantly composed of amorphous silica at a specific surface of 235 $m^2/kg$ produced using a charcoal incinerator were determined. The maximum ordinary Portland cement (OPC) replacement with the RHA increased with increase in water/binder (w/b) ratio of the concrete mixes. The results show that 15 % OPC could be substituted by the RHAwithout strength loss at w/b ratio of 0.50. The split tensile strength generally increased with increase in RHA content for the mixes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.684-687
• /
• 2004

The purpose of this study is to obtain basic data on the properties of the development of lightweight mortar contained foam agent for various applications in the field. In the experiment, as a result of measurement the specific gravity by the change of the W/C and the foam agent into a variable and measuring the compressive strength of mortar, specific gravity checked that a compressive strength therefore increased. Mortar is using lightweight foam agent having the change of specific gravity, the water cement ratio $50\%,\;40\%,\;30\%$. This paper present extensive data on the characteristics of strength of the lightweight mortar and also presents the mechanical characteristics of the lightweight according to specific gravity.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.354-359
• /
• 2005

The objective of this research work is to investigate into static characteristics of ISB panels with the pyramidal structure as a internally structured material. In order to investigate the behavior of material deformation and fracture characteristics, several tensile tests have been carried out for the ISB panel and skin sheet. Through the results of the experiments, the mechanical properties of ISB panel and skin sheet and fracture characteristics have been obtained. In addition, the mechanical properties of the ISB panel have been compared with that of the skin sheet by the view point of a specific modulus, a specific yield strength and a specific strength. From the results of the comparision, it has been shown that the ISB panel has an excellent static characteristics.

• 한국디지털건축인테리어학회논문집
• /
• 제11권4호
• /
• pp.21-27
• /
• 2011

These materials in architecturally glass or metal have weaknesses such as inadequate insulating quality, combustibility and toxic gases in fires substance. However, Autoclaved Lightweight Concrete(ALC) has excellent thermal insulation properties and seem to possess the superb insulating quality as substitute of existing exterior materials. This research is to compare experimentally to the kind of the strength properties of ALC materials which mixed with blast furnace slag pounder and silica fume. For the purpose of increasing the strength, the plastic states of ALC evaluate the physical characteristics as microstructure and strength according to various specific gravity. According to the quicklime quantity the compressive strength is proportionate depend on the absolute dried specific gravity. When not putting in 10% quicklime, the compressive strength appeared most lowly with 14.0MPa. When putting in the quicklime, the strength appeared higher with 15.1MPa. And strength of specimen containing 2.25% silica fume is 15.6MPa increased 10.3% than reference specimen 14.0MPa.

• 한국건설순환자원학회논문집
• /
• 제8권4호
• /
• pp.562-570
• /
• 2020

본 연구에서는 단위중량 2,000kg/㎥ 이하의 고강도 시멘트 복합체 제조기술 및 기초 물성을 탐구한다. 선행연구에서 제시한 초고성능콘크리트의 배합에서 잔골재를 경량 재료인 솔리드 버블과 경량잔골재로 치환하여 경량 고강도 시멘트 복합체를 제조기술을 제안한다. 솔리드 버블을 혼입한 시멘트 복합체는 밀도 2.0g/㎤ 이하에서 재령 28일 강도 116MPa~141MPa의 고강도 발현이 가능한 것으로 나타났다. 경량잔골재를 사용하는 경우 솔리드 버블을 혼입한 시멘트 복합체보다 역학적 성능이 떨어지는 것으로 나타났다. 배합표상에서 계산된 단위용적중량과 경화된 시멘트 복합체의 밀도가 큰 차이를 보이지 않았으며, 이는 배합표상에서 계산된 단위용적중량을 통해 경화된 시멘트 복합체의 밀도를 추정할 수 있는 것을 보여준다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권1호
• /
• pp.95-99
• /
• 1996

The bending and compression strength properties of two types Rhus verniciflua specimens, which made of no heat-treated wood and heat-treated wood for urushiol extraction, were measured. The heat-treated specimens were finger-jointed with either resorcinol-phenol or polyurethane resin adhesives, and the vertical type bending strength property was also measured in these specimens. The results obtained are as follows ; 1. The correlation coefficient between the compression strength and specific gravity in the specimens of no heat-treated and heat-treated wood was high. However there was no difference in compression strength property as affected by heat treatment. 2 The correlation coefficient between the bending strength and specific gravity in the specimens of no heat-treated and heat-treated wood was also high. However, there was no difference in bending strength property as affected by heat treatment. 3 The bending test showed high correlation between modulus of elasticity and modulus of rupture for the specimens made of no heat-treated and heat-treated wood. However, there was no difference in bending strength property between the specimens made of heat-treated and no heat-treated wood. 4. The efficiencies of bending strength test on the finger-jointed specimens of heat-treated wood with resorcinol-phenol and polyurethane resin adhesives were 0.85, 0.81. respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제16권1호
• /
• pp.21-44
• /
• 1988

팔만칩 및 톱밥을 보오드에 활용(活用)하기 위한 방안(方案)의 하나로, 이들의 취약한 처리(物理) 및 기계적(機械的) 성질(性質)을 개선(改善)시키기 위하여 비목질재료(非木質材料)인 폴리프로필렌망(網)을 결체(結締)하여 보오드를 제조(製造)하였다. 보오드의 제조조건(製造條件)은 비중(比重)을 0.40, 0.55, 0.70 및 0.85의 4수준으로 하고 수지첨가율(樹脂添加率)을 8%, 10%, 12% 및 14%의 4수준으로 하였으며, 망수(網數)는 1장에서 4장으로 하여 보오드를 각각 제조(製造)하였다. 이들 보오드의 물리(物理) 및 기계적(機械的) 성질(性質)은 두께팽창율(膨脹率), 휨파괴계수(破壞係數), 휨탄성계수(彈性係數), 인장강도(引張强度), 박리저항(剝離抵抗) 및 나사못보지력(保持力) 등을 측정조사(測定調査)하고 고찰(考察)하였는데 본연구(本硏究)에서 얻은 중요한 결론(結論)은 다음과 같다. 1) 지수첨가율(指數添加率)이 증가함에 따라 두께팽창율(膨脹率)은 감소(減少)하였고, press-lam 보오드는 일반성형(一般成形)보오드 보다 낮은 값을 보여 주었다. 2) 보오드의 휨파괴계수(破壞係數) 및 탄성계수(彈性系數)는 비중(比重)이 증가하였으며 press-lam 보오 드는 일반적형(一般的形)보오드보다 높은 값을 나타내었다. 망수(網數)가 증가함에 따라 휨파괴계수(破壞係數)는 증가하였고, 수지첨가율(樹脂添加率)이 증가함에 따라서도 같은 양상이 나타났으나 휨탄성계수(彈性係數)의 경우 망수(網數)에 따른 효과(效果)는 나타나지 아니하였다. 3) 비중(比重)이 증가함에 따라 보오드의 인장강도(引張强度)는 증가하였으며, 망구성(網構成)보오드는 대조보오드보다 높은 값을 나타내었다. 또 망수(網數)가 증가함에 따라서도 인장강도(引張强度)는 증가하였으며, press-lam 보오드는 일반적형(一般的形)보오드보다 높은 인장강도치(引張强度値)를 보여 주었다. 4) 보오드의 박리저항(剝離抵抗)은 비중(比重)이 증가함에 따라 증가하였으며 망(網)을 결체(結締)한 보오드는 대조보오드 보다 모두 낮은 값을 보여 주었다. 기수매구성(奇數枚構成)보오드는 우수매구성(偶數枚構成)보오드보다 낮은 박리저항치(剝離抵抗値)를 보였다. 5) 수지첨가율(樹脂添加率) 및 비중(比重)이 증가함에 따라 나사못 보지력(保持力)은 증가하였으나, 망구성(網構成)보오드와 대조보오드사이에서의 차이는 크지 아니하였다. presslam 보오드에서 팔만칩보오드의 경우 고비중(高比重)보오드가, 톱밥보오드의 경우 저비중(低比重)보오드가 각각 대조보오드보다 높은 값을 보여 주었다.

• 한국재료학회지
• /
• 제28권1호
• /
• pp.62-67
• /
• 2018

Active clay, bentonite and zeolite were used as porous materials for humidity controlling ceramic boards. The specific area and the pore volume of active clay were higher than bentonite and zeolite. The flexible strength of the gypsum board decreased with an increasing amount of porous material, and the flexible strength was lowest when active clay with a higher specific surface area than others porous materials was added. The specific surface area and total pore volume of ceramic boards containing porous material were highest at $102.25m^2/g$, $0.142cm^3/g$, respectively, when the active clay was added. In addition, as the amount of added porous materials increased, the specific surface area and total pore volume of the ceramic board increased, but the average pore diameter decreased. The addition of s porous materials with a high specific area and a large pore volume improved the moisture absorptive and desorptive performance of the ceramic board. Therefore, in this experiment, the moisture absorptive and desorptive properties were the best when active clay was added. Furthermore, as the amount of added porous materials increased, the moisture absorptive and desorptive properties improved. When 70 mass% of active clay was added to ${\alpha}$-type gypsum, the hygroscopicity was the highest, about $300g/m^2$, in this experiment.

• 대한통합의학회지
• /
• 제9권1호
• /
• pp.151-161
• /
• 2021

Purpose : This study was to investigate the effectiveness of ESWT and plantar fascia-specific stretching exercise vs ESWT and high-load strengthening exercise in patients with chronic plantar fasciitis. Methods : The subjects were randomized to extracorporeal shock wave therapy ( ESWT, for 3 weeks) and daily plantar-specific stretching (Group I: Stretch group) or ESWT and high-load progressive strength (Group II: Strength group) performed every second day. The main outcome measures were ultrasound, visual analogue scale (VAS), and Korean Foot Function Index (KFFI). The ultrasound (plantar fascia thickness), pain intensity I, II (the most painful of the day?, the pain when you first step in the morning?) and KFFI (functional performance) were compared between the groups. Results : No significant difference was observed between the groups in the plantar fascia thickness but pain intensity I, II was significantly lower in Group 2 than in Group 1 at only 12weeks and functional performance was also significantly increased in Group 2 compared to Group 1 at only 12 weeks. Conclusion : The high-load strengthening exercise consisting of the progressive exercise protocol, resulted in superior after 12 weeks compared with plantar-specific stretching. High-load strength exercise may aid in a quicker reduction in pain and improvements in functional performance.