• 대한치과보철학회지
• /
• 제42권1호
• /
• pp.21-29
• /
• 2004

Statement of problem : Because dental impression can be a cross-infection source, disinfection, such as immersion disinfection is nessecary. However, the disinfection process may change the volume of the impression cast. Purpose : The purpose of this study is to find out the effects on dimensional change of different storage times and methods, of agar-alginate impression when immersed in a 5% idophor disinfectant. Material and Methods : An agar-alginate impression was made from a mandible model and then was disinfected and stored according the experimental conditions and a stone model was produced. Measurements were taken between reference points on the original mandible model and they were compared to measurements taken between reference points on the stone model. The study was divided into 4 groups. In group 1, the impression was stored in a 100% humidor for 30 minutes, 1 hour, 2 hours, 3 hours, 4 hours, 6 hours, 12 hours and 24 hours and stone models were made at each time. In group 2, the impression was immersed in 5% idophor disinfectant and then stored in a 100% humidor for the same length of times as group 1, and stone models were made at each time. In group 3, the impression was stored in extend-A-pourR, a special storage solution for 30 minutes, 1 hour, 2 hours, 3 hours, 4 hours, 6 hours, 12 hours, 24 hours 3 days, and 7 days and stone models were made at each time. In group 4, the impression was immersed in 5% idophor disinfectant and then stored in stored in extend-A-pourR, a special storage solution for the same length of times as group 3, and stone models were made at each time. 5 impressions and stone models were made at each time to make a total of 180. The Student-t test (P < .05) was used to do a statistical analysis of the measurements of the mandible model and stone models. The repeated-measure 2-way analysis of variance (P < .05) was used to do a statistical analysis of the difference in the 4 groups. Results : The percent liner dimensional change was from $0.25{\pm}0.03%$ (group 1, 30 minutes) to $0.34{\pm}0.06%$ (group 4, 7 days). No significant change was noticed between the 4 groups. Conclusion : According to the above study, in both methods, least dimensional change was recorded when the storage times were short and in both methods, immersion in 5% idophor disinfectant did not effect dimensional change in the agar-alginate impression.

• 대한한방내과학회지
• /
• 제21권3호
• /
• pp.477-486
• /
• 2000

Objective : This is the experimental paper to investigate the effects of Gami-oryungsan(GO) on decreasing the activities of free radicals. Methods : We used three different group; In the normal group, we injected Gami-oryungsan extract intraperitoneally daily for 15days(90mg/kg), bromobenzene(310mg/kg) for 2days and injected normal saline in the control group. Results : We have observed the effects of Gami-oryungsan about the damage of rat's liver induced by bromobenzene. We can find the level of lipid peroxidation and type conversion ratio of xanthine oxidase decreased compared to the case of bromobenzene-treated group. The enzyme of activities of superoxide dismutase, catalase and glutathione peroxidase highly increased in Gami-oryungsan pre-acupunctured group compared to the group treated with only bromobenzene. The level of glutathione in Gami-oryungsan pre-acupunctured group was increased as highly as normal group. Also it was not seen special effects concerning aldehyde oxidase. Conclusions : Gami-oryungsan extract recovers the damage of liver due to bromobenzene intoxication by decreasing the lipid peroxidation.

• 조명전기설비학회논문지
• /
• 제21권10호
• /
• pp.126-133
• /
• 2007

본 연구에서는 데이터 마이닝 기법을 이용하여 전력계통의 단기 부하 예측을 하는 방안을 제시한다. 기존의 단기 부하 예측은 시계열 분석 방법이 주를 이루었으며, 이러한 방법은 방대한 양의 자료를 기반으로 데이터베이스를 만들고 이를 이용하여 여러 가지 계수를 이용하여 수요를 예측함으로써 많은 시간과 노력이 소요되고 있다. 따라서 본 연구에서는 좀 더 적은 시간과 노력으로 부하예측이 가능하도록 데이터마이닝 기법을 이용하여 요일별 그리고 특수 일의 패턴을 분석하고 의사결정트리를 이용한 예측방법을 제시하고자 한다. 그리고 현재 전력거래소를 통해 거래되고 있는 계통한계가격과의 관계를 분석하여 예측 계수에 계통한계가격을 추가하여 예측방법을 제시하고자 한다.

• 천문학회지
• /
• 제43권3호
• /
• pp.95-104
• /
• 2010

We outline our GRB afterglow observation program using the 1-m telescope at Mt. Lemmon Optical Astronomy Observatory (LOAO), and report the first observations of the GRB afterglows. During the 2007B semester, we performed follow-up imaging obsrevations of 6 GRBs, and succeeded in detecting four GRB afterglows (GRB 071010B, GRB 071018, GRB 071020, and GRB 071025) while placing useful upper limits on the light curves of the other GRBs. Among the observed events, we find that three events are special and interesting. GRB 071010B has a light curve which has an unusually long jet break time of 11.8 days. For GRB 071025, its red R-I(~2) color suggests that it is likely to be at z~5. GRB 071020 has a light curve which shows a clear brightening at 0.3-1 days after the burst, where our LOAO data play a crucial role by providing an unambiguous evidence for the brightening. These are the first successful detections of GRB afterglows by a facility owned and operated by a Korean institution, demonstrating the usefulness of the 1-m telescope for transient phenomena such as GRBs up to very high redshift.

• 상하수도학회지
• /
• 제21권6호
• /
• pp.709-715
• /
• 2007

The dewaterability of a sludge can be characterized by two ways: the residual moisture content in the sludge cake after dewatering process, and the filtration of the sludge. Time to filter (TTF) represents filtration processes that are special cases of the flow through a solid matrix concept. TTF characterizes a resistance to filtration. The sludge resistance, in turn, can be subdivided into resistances associated with the solid phase and the liquid phase to evaluate the effect of each of the two phases on sludge dewaterability. In order to determine the dewatering characteristics of the water sludge samples, TTF and zeta potential were measured. For these studies cationic polymer was chosen for water sludge dewatering experiments. The zeta potential of thickener sludges neared from minus values to zero values till 4 days after sampling. The dewaterability of thickener sludges using cationic polymer was deteriorated according to the increase of detention time. As the detention time was increased from 4 to 10 days, the optimal dose of the polymer was increased from 4 to 8mg/L. Therefore, the optimal detention time plays an important part for the dewaterability of a sludge.

• 생약학회지
• /
• 제4권4호
• /
• pp.173-179
• /
• 1973

Tobacco, which has nicotine for its main component, has been in medical use for a long time and in great demand for smoking throughout the world. The purpose of this study is to control nicotine amount and to increase yield more efficiently by the method of systematic variations. Nutrient solutions for tobacco culture were designed and prepared in 10 kinds with mineral ions: $NO_{3^-},\;SO_{4^{--},\;PO_4{^{-3},\;K,{^+}\;Ca,{^{++}\;Mg,{^{++}$, Mn, B, Cu, Zn, Mo, and Fe. Nicotiana tabacum L. Yellow Special A, grown for 50days from sowing, was replanted in plastic pot and cultured for 65 days supplying with prepared nutrient solutions. After harvest, their nicotine amount was determined by means of acid-base titrimetry and gas chromatography. The tobacco plants in KCa 4 and KMg 9 groups demonstrated the highest yield in total leaves weight and KMg 7 group in average nicotine amount. They have shown the increase of nicotine amount from lower leaf to 16th leaf, and thereafter decreased gradually. The author also pursued the optimum ionic proportions for the absolute nicotine amount in tobacco by means of systematic variations method.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2003년도 춘계 학술발표회 논문집
• /
• pp.445-455
• /
• 2003

Relatively high carbon-14 emissions, which occurred at PHWR Plant during 1998 and 1999, made the site staff to implement several operational improvements: 1) the frequency and volume of the moderator cover gas purging were reduced through increased $O_2$ additions to the cover gas, 2) the 'old' resin columns were not used during re-start of the reactor from outage, 3) efforts were made to minimize air ingress, 4) the maximum service time of moderator ion-exchange columns were restricted to about 80 days. Through the improvements, the carbon-14 emission from each PHWR reactor returned to the normal levels during the remainder of 1999 and during 2000. We carried out a special surveillance at W-1 and W-3 from September 2001 to August 2002 to properly evaluate ways to optimize the use of moderator ion exchange resins from a C-14 perspective. The surveillance showed that only data that provided an operational marker for deciding when to remove the IX-resin column is an observed increase in the C-14 stack emissions themselves. Also, it is shown that any increase over the rate of 0.4 Ci $month^{-1}$ for two consecutive weeks may be the indication for an ion-exchange resin column change, especially if the IX-resin column has been in service for more than 80 days.

• 한국자원식물학회지
• /
• 제22권6호
• /
• pp.506-512
• /
• 2009

To study the effect of genotype of donor plants on anther culture, anthers of nine hybrid cultivars (Derby, Special, Bossanova, Minipaprika, Fiesta, Boogie, Phenlene, Kufrah, and Clarity) of sweet pepper (Capsicum annuum L.) were cultured in a petridish containing C medium (Sibi, Dumas De Vaulx medium) supplemented with 0.1 mg/L 2,4-D and 0.1 mg/L kinetin, 3% sucrose and 0.32% Phytagel. The cultures were incubated in the dark at $35^{\circ}C$ for seven days, and then cultured at $25^{\circ}C$ with a photoperiod of 16 hr. daylength for 40 days. Frequency of callus formation and plant regeneration was varied among cultivars. Callus formation was ranged from 6% in Phenlene to 69.8% in Kufrah. The highest percentage of regenerated plantlets was obtained in cv. Phenlene (2.67%) followed by Bossanova (2.41%). Result of ploidy analysis; chromosome number observation and flowcytometry analysis, showed that haploid plants could be developed from all of these hybrid cultivars except cv. Fiesta, where highest percentage of haploid plants were obtained in Minipaprika (40%) followed by cv. Bossanova (36.1%). Haploid plants derived from these hybrid cultivars contained single set of chromosome (12 in numbers), higher stomata density (numbers), and smaller sized stomata as compare to diploid plants. The mean length of stomata was 26.9 ${\mu}m$ in haploid plants and 35.7 ${\mu}m$ in diploids.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제27권2호
• /
• pp.88-94
• /
• 2024

Purpose: Infantile hypertrophic pyloric stenosis (IHPS) is a common gastrointestinal disease in neonates and hypochloremia metabolic alkalosis is a typical laboratory finding in affected patients. This study aimed to analyze the clinical characteristics of infants with IHPS and evaluate the association of clinical and laboratory parameters with ultrasonographic findings. Methods: Infants diagnosed with IHPS between January 2017 and July 2022 were retrospectively evaluated. Results: A total of 67 patients were included in the study. The mean age at diagnosis was 40.5±19.59 days, and the mean symptom duration was 11.97±9.91 days. The mean pyloric muscle thickness and pyloric canal length were 4.87±1.05 mm and 19.6±3.46 mm, respectively. Hyponatremia and metabolic alkalosis were observed in five (7.5%) and 36 (53.7%) patients, respectively. Serum sodium (p=0.011), potassium (p=0.023), and chloride levels (p=0.015) were significantly lower in patients with high bicarbonate levels (≥30 mmol/L). Furthermore, pyloric canal length was significantly higher in patients with high bicarbonate levels (p=0.015). To assess metabolic alkalosis in IHPS patients, the area under the receiver operating characteristic curve of pyloric canal length was 0.910 and the optimal cutoff value of the pyloric canal length was 23.5 mm. Conclusion: We found a close association between laboratory and ultrasonographic findings of IHPS. Clinicians should give special consideration to patients with pyloric lengths exceeding 23.5 mm and appropriate fluid rehydration should be given to these patients.

• 대한원격탐사학회지
• /
• 제30권5호
• /
• pp.677-686
• /
• 2014

2014년에 완공된 남극 장보고 과학기지 주변 테라노바 만은 연중 해빙이 넓게 분포하고 있어 쇄빙선의 항해에 매우 큰 영향을 미치고 있다. 이 연구에서는 수동 마이크로파 센서인 Special Sensor Microwave/Imager (SSM/I) 및 Special Sensor Microwave Imager/Sounder (SSMIS)의 최근 10년간 해빙 면적비 자료와 우리나라의 쇄빙 연구선인 아라온호의 2010-2012년 항해 경로를 이용하여 장보고 과학기지 방문을 위한 쇄빙선의 최적 항로와 항해 가능 기간을 분석하였다. 아라온호는 최대 78%의 해빙 면적비를 보이는 지역까지 항해가 가능하였다. 아라온호의 항해속도는 해빙 면적비가 높을수록 감소하였으나, 70%의 해빙 면적비까지는 전체 항로에 대한 평균속도(~11 kn)에 근접한 속도를 나타냈다. 이에 따라 아라온호는 70% 이하의 해빙 면적비까지 일반적 운항이 가능하다고 판단하였다. 2010-2012년에 아라온호가 항해한 경로에 대해, 최근 10년 동안의 해빙 면적비 자료로부터 70% 이하의 해빙 면적비를 나타내는 연중 항해가능 기간을 도출하였다. 2010년과 2011년의 항로에 대한 10년 동안의 연중 최대 항해 가능 기간은 각각 연 61일과 62일이었으나, 70% 이하의 해빙 면적비가 관찰되지 않아 일반적인 항해가 어려운 연도가 일부 관찰 되었다. 반면 2012년의 아라온호 항해 경로는 매년 70% 이하의 해빙 면적비를 나타내는 항해 가능 기간이 존재하였으며, 이는 최소 연 15일에서 최대 연 89일로 분석되었다. 이를 통해 2012년에 운항한 아라온호의 항로가 장보고 과학기지 방문을 위한 쇄빙선의 최적 항로임을 제시할 수 있었다. 하지만 수 십 km의 해상도를 가지는 해빙 면적비 자료로는 장보고기지 연안에 근접한 해빙 상태를 알 수 없기 때문에, 고해상도의 광학 및 SAR 자료를 이용한 연구가 필요할 것으로 보인다.