• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.19-28
• /
• 1998

For cultivation on sawdust-bed of oak-mushroom until present time, inoculation of spawn on sawdust bed has been performed by sawdust spawn. But, liquid spawn may have advantages for rapid mass production of spawn, and now, sawdust-cultivation by liquid spawn inoculation should be applied instead of sawdust spawn. Therefore, investigations were performed to evaluate the effect of sawdust-cultivation by liquid spawn inoculation. The results were as follows: 1. When 11 kinds of liquid media were applied, the oak-mushroom culture medium was the most excellent in growth. Most suitable temperature at PDA was $25^{\circ}C$, and $22.5\sim27.5^{\circ}C$ in range were optimal for liquid culture. In liquid culture, amount of mycelial growth increases rapidly up to 40 days of cultivation. Incubation at fermentor brought yield of 106mg dry mycelia per 40ml media after 17 days. 2. In 1l-spawn bottle, growth of mycelium by inoculation of 20ml-liquid spawns were faster than 6g-sawdust spawn in spread of mycelia. On 2kg-bag culture, inoculations of 10ml-, 20ml- and 30ml-liquid spawns were all slower than 20g-sawdust spawn in mycelial spread. So, amount increasement in ampunt of liquid spawn should be discussed. Yields of mushrooms until third sproutings of 2kg-bag culture were 580g in 30ml-liquid spawn inoculation, but 510g, 486g and 470g from 20g-sawdust spawn, 20ml-liquid spawn and 10ml-liquid spawn, respectively. Thus, 30ml-liquid spawn inoculation was highest in yield.

• Mycobiology
• /
• v.47 no.1
• /
• pp.97-104
• /
• 2019

Mushroom cultivation has gained increased attention in recent years. Currently, only four types of spawn, including sawdust spawn, grain spawn, liquid spawn, and stick spawn, are commonly available for mushroom cultivation. This limited spawn diversity has led to difficulty in selecting suitable inoculum materials in some cultivation. In this study, three small blocks of lignocellulosic agro-wastes and one block of a synthetic matrix were prepared as support for growing Pleurotus ostreatus in liquid medium. Mycelium-adsorbed blocks were then evaluated for their potential as block spawn for fructification. Our results indicated that the edible fungus was adsorbed and abundantly grew internally and externally on loofah sponge and synthetic polyurethane foam (PUF) supports and also has the ability to attach and grow on the surface of sugarcane bagasse and corncob supports. The mycelia of P. ostreatus adhered on corncob exhibited the highest metabolic activity, while those on the PUF showed the least activity. Mycelial extension rates of block spawns made of agro-waste materials were comparable to that of sawdust spawn, but the block spawn of PUF showed a significantly lower rate. No significant differences in cropping time and yield were observed among cultivations between experimental block spawns and sawdust spawns. Moreover, the corncob block spawn maintained its fruiting potential during an examined period of 6-month storage. The developed block spawn could be practically applied in mushroom cultivation.

• The Korean Journal of Mycology
• /
• v.34 no.2
• /
• pp.79-83
• /
• 2006

This study was made to investigate the difference of the shiitake productivity according to the use of sawdust, plug-shaped and liquid spawn. Contamination of medium was confirmed by eye. There was no contamination in the liquid spawn treatment. And, contamination rates in the sawdust spawn and plug-shaped spawn were 6.7%, respectively. Productivity of fruit-bodies was 725.1 g from sawdust spawn, 726.2 g from plug-shaped spawn and 573.9 g from liquid spawn until 3rd flushing of fruit-bodies. The number of fruit-bodies was 57.4 per medium of sawdust spawn, 64.3 plug-shaped spawn and 45.1 liquid spawn. At yield per medium, the percentage of media producing over 1,000 g was 13% in plug-shaped spawn and 7% in liquid spawn. However, there was no medium producing over 1,000 g of fruit-bodies in sawdust spawn. Fruit-bodies of $600{\sim}900g$ were yielded from 79% of sawdust spawn treatment, 53% plug-shaped spawn and 33% liquid spawn treatment. When compared the productivity of fruit-bodies, liquid spawn treatment appeared lower than sawdust spawn and plug-shaped spawn treatment at 1st flushing, but appeared higher than the others at 2nd and 3rd flushing.

• The Korean Journal of Mycology
• /
• v.38 no.2
• /
• pp.125-129
• /
• 2010

This study was carried out to elucidate suitable spawn culture for an artificial cultivation of Neolentinus lepideus. The optimum culture conditions of the liquid spawn were deffated soy flour for main material, 12 days for culture period and 0.9 vvm for aeration volume, respectively. Sawdust spawn was appropriate for douglas fir sawdust and deffated corn flour (95 : 5, v/v) for mycelia growth and fruiting body formation. In case of liquid spawn, cultivation period was two shorter than sawdust spawn and mushroom yield was 111.9 g per 850ml cultivation bottle. In conclusion, the suitable spawn for fruiting body production was found to be liquid spawn than sawdust spawn with considering cultivation period and mushroom productivity.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.1031-1040
• /
• 1996

Spawn bottle cutting and spawn cake shredding machine has been developed to save the farm labor and operating cost for mushroom growing farmers. The prototype can cut the bottom and side of the bottle while shredding the spawn cake by one farmer. The cutting plastic shell is done by two couples of high speed disc saws that can cut cross section and lengthwise two side of the bottle, while spawn cake shredding is done by spike teethed rotating drum and wiremesh concave. The optimum speed of cutting disc saw was observed 1.700rpm both the cross cutting saw and lengthwise cutting saw in consideration of the cutting accuracy. And the location for the instalation of cross cutting disc saw was considered as around 4 mm above the table bottom , while the optimum clearance between two edges of lengthwise cutting disc saw was showed 86mm. For the sawdust spawn cake shredder , proper size of spawn sawdust granule was observed in the 15 x 15mm size withmesh concave with the shredding rum speed of 500rpm. The prototype can be reduce 73 per cent of working hours with the working cost reduction of 49 per cent compare with those of conventional operation.

• Journal of Mushroom
• /
• v.6 no.1
• /
• pp.38-41
• /
• 2008

Studies were processed to confirm the difference of the shiitake productivity according to different spawn shapes(sawdust, plug-shaped and liquid spawns) on middle-temperature type strain. A tendency of fruiting was similar among three treatments, and treatments inoculated with plug-shaped spawn and liquid spawn produced over 50 % of total yield until 2nd flushing period and 80 % of total yield until 4th flushing period. In investigation of deformed fruit-bodies, all of three treatments occurred until 2nd flushing period. However, in rate of deformed fruit-bodies, treatment inoculated with liquid spawn was lower than others. In investigation of yield, the amount produced on treatment inoculated with liquid spawn was 411 g per medium and it was highest among treatments. And the amount of fruit-bodies over 10 g was higher than others. Also, the number of fruit-bodies between sawdust and plug-shaped spawn was different, but each weight of fruit-bodies among three treatments was not different.

• The Korean Journal of Mycology
• /
• v.31 no.2
• /
• pp.94-97
• /
• 2003

In order to shorten cultivation periods of Agrocybe cylindracea, liquid spawn was used in place of sawdust spawn. Optimum culture condition of liquid spawn was PSB (potato extract sugar broth) medium, $25^{\circ}C$ temperature and pH 7.0. And, optimum inoculum volume was $10{\sim}15ml$. Two grams per liter of dry weight of the fungal mycelia were obtained with 10l of culture bottle with liquid spawn after 10 days. In 850 ml-bottle of sawdust media, cultivation period using liquid spawn (30 days) was five days shorter compared with the cultivation period in sawdust spawn (35 days). Also, complete growth of sawdust media was increased to 92% (liquid spawn) from 75% (sawdust spawn) and yield of fruiting bodies was increased to about 10%.

• Journal of Mushroom
• /
• v.8 no.1
• /
• pp.11-15
• /
• 2010

The word spawn is derived from an old French verb, espandre, meaning to spread out or expand. Spawn is also defined as "the mycelium of fungi, especially of mushrooms grown to be eaten, used for propagation". The effects of bag spawn to sawdust substrate on the growth of Pleurotus ostreatus were conducted. The duration of mycelial growth and days of pinhead formation of bag spawn(2.5kg) were 18~19days and 7~8days, whereas bottle spawn ($1,000m{\ell}$) was 18days and 6days, respectively. The yield of mushroom fruitbody was that bag spawn is 100~118g, bottle spawn is 95~115g. In economical analysis, bag spawn is increased to 50%, compared to bottle spawn in relative income.

• The Korean Journal of Mycology
• /
• v.36 no.1
• /
• pp.41-44
• /
• 2008

Studies were made to investigate the difference of the shiitake productivity according to the use of sawdust and liquid spawn on middle-temperature type strain. Treatments inoculated with sawdust spawn have shown that yields were dispersed according to flushing periods and fruit-bodies occurred sporadically on medium. However, treatments inoculated with liquid spawn have shown that yield was relatively concentrated at 1st flushing period and fruit-bodies were densely occurred on medium. At total yield and the number of fresh fruit-bodies until seventh flushing, treatments inoculated with liquid spawn were more than those inoculated with sawdust spawn. Also, biological efficiency (B.E.) of inoculation with 20 ml liquid spawn which produced 30% of the medium weight was highest as 69%, but biological efficiency of inoculation with 10 g sawdust spawn was lowest as 42%. And, although rate of fruit-bodies over 10 g in total yield was high on treatments inoculated with sawdust spawn, amounts of fruit-bodies over 10 g were not different among treatments.

• The Korean Journal of Mycology
• /
• v.26 no.1 s.84
• /
• pp.20-24
• /
• 1998

The effects of liquid spawn to sawdust substrate on the growth of Flammulina velutipes were conducted for two years. The duration of optimal incubation for preculture and main culture of liquid spawn was 4 days and 6 days, respectively. When using liquid spawn, the application time for the first pinhead formation was similar with sawdust spawn, and incubation time of sawdust substrate was variable with liquid spawn and inoculum quantity. But, the overall yield of mushroom fruitbody was increased by using liquid spawn, excepting sesame hull extract medium.