• 한국공간정보시스템학회 논문지
• /
• 제11권2호
• /
• pp.89-98
• /
• 2009

데이터 스트림은 다양한 입력속도로 끊임없이 입력되고 데이터 스트림을 저장하는 메모리상의 저장공간은 유한하기 때문에 때때로 저장공간을 초과하는 데이터가 입력되는 경우가 발생한다. 이 문제를 해결하기 위해 초과되는 데이터의 일부를 버려 메모리 초과를 방지하는 부하제한 기법이 연구되었다. 기존의 부하제한 기법은 데이터의 편차에 따른 최적의 샘플링 비율을 갖는 랜덤 샘플링을 사용한다. 그러나 이 기법은 공간적 특성을 고려하지 않기 때문에 공간 질의에 사용되는 데이터와 사용되지 않는 데이터를 구분하지 않고 샘플링 한다. 그래서 공간 질의가 포함되는 u-GIS 환경에서는 질의 정확도가 감소하는 문제가 발생하였다. 본 논문에서는 공간 질의와 비공간 질의가 동시에 발생하는 u-GIS 환경에서 질의 정확도를 보다 향상 시키는 부하제한 기법을 연구하였다. 이 기법은 동시에 실행되는 공간 질의의 공간적 이용도에 따라 차등적으로 샘플링을 하여, 질의에 이용될 확률이 낮은 데이터를 샘플링을 한다. 제안된 부하제한 기법은 공간질의가 존재하는 경우 질의 정확도를 크게 향상 시켰고, 샘플링 중 공간 필터링 연산을 적용하여 질의처리 속도도 일부 향상 시켰다.

• 대한조선학회논문집
• /
• 제58권3호
• /
• pp.182-190
• /
• 2021

Computational simulations of turbulent flows around a model ship have been performed to investigate an influence of TVD schemes on the accuracy of advective terms associated with ship resistances. Several TVD schemes including upwind, second-order upwind, vanLeer, and QUICK as well as a nonTVD linear scheme were studied by examining temporal and spatial characteristics of accuracy transition in adjacent cells to the hull. Even though vanLeer scheme was the most accurate among TVD schemes in both structured and unstructured grid systems, the ratio of accuracy switch from 2^nd order to 1^st order in vanLeer scheme was considerable compared with the 2^nd order linear scheme. Also, the accuracy transition was observed to be overally scattered in the unstructured grid while the accuracy transition in the structured grid appeared relatively clustered. It concluded that TVD schemes had to be carefully used in computational simulations of turbulent flows around a model ship due to the loss of accuracy despite its attraction of numerical stability.

• ETRI Journal
• /
• 제30권1호
• /
• pp.59-67
• /
• 2008

The necessity for the precise time synchronization of measurement data from multiple sensors is widely recognized in the field of global positioning system/inertial navigation system (GPS/INS) integration. Having precise time synchronization is critical for achieving high data fusion performance. The limitations and advantages of various time synchronization scenarios and existing solutions are investigated in this paper. A criterion for evaluating synchronization accuracy requirements is derived on the basis of a comparison of the Kalman filter innovation series and the platform dynamics. An innovative time synchronization solution using a counter and two latching registers is proposed. The proposed solution has been implemented with off-the-shelf components and tested. The resolution and accuracy analysis shows that the proposed solution can achieve a time synchronization accuracy of 0.1 ms if INS can provide a hard-wired timing signal. A synchronization accuracy of 2 ms was achieved when the test system was used to synchronize a low-grade micro-electromechanical inertial measurement unit (IMU), which has only an RS-232 data output interface.

• 한국전산유체공학회지
• /
• 제8권3호
• /
• pp.41-49
• /
• 2003

The spatial accuracy becomes first-order when second-order conservation schemes including the non-conservative interpolation in general Chimera method are used. To ensure the solution accuracy, the discontinuities must be located away from the overlapped regions, and the length of overlapped region also must be proportional to the grid spacing. In this paper, a proposed method, cut-paste algorithm, is used to satisfy above constraints. The cut-paste algorithm can generate the optimal mesh inteface region automatically, To validate the spatial and temporal accuracy due to the non-conservative interpolation, inviscid and viscous problems are tested.

• 한국측량학회지
• /
• 제32권6호
• /
• pp.581-590
• /
• 2014

With rapid land development, land category should be updated on a regular basis. However, manual field surveys have certain limitations. In this study, attempts were made to extract a feature vector considering spectral signature by parcel, PIMP (Percent Imperviousness), texture, and VIs (Vegetation Indices) based on RapidEye satellite image and cadastral map. A total of nine land categories in which feature vectors were significantly extracted from the images were selected and classified using SVM (Support Vector Machine). According to accuracy assessment, by comparing the cadastral map and classification result, the overall accuracy was 0.74. In the paddy-field category, in particular, PO acc. (producer's accuracy) and US acc. (user's accuracy) were highest at 0.85 and 0.86, respectively.

• Spatial Information Research
• /
• 제11권4호
• /
• pp.327-340
• /
• 2003

공간데이터베이스의 품질평가는 공간데이터베이스의 특징에 따라 적절한 품질요소와 평가방법이 적용되어야 한다. 본 연구에서는 공간데이터베이스의 하나인 토지데이터베이스에 대한 구체적인 품질평가 방안을 제시하는데 목적을 두고 있다. 이를 위하여 토지데이터베이스를 구성하는 지형데이터베이스, 지적데이터베이스, 용도지역지구 데이터베이스의 구축 단계별 품질요소를 선정하고, 선정된 품질요소에 대하여 평가방법을 제시하였다. 토지데이터베이스의 품질요소는 위치정확성, 속성정확성, 일관성, 완결성, 시간정확성, 신뢰성, 이력 등이며, 다양한 통계적 및 수학적 방법들을 검토하여 각 품질요소의 객관적인 측정방법을 제안하였다.

• 한국지리정보학회지
• /
• 제20권3호
• /
• pp.125-140
• /
• 2017

지금까지 지가나 주택가격을 추정하는데 회귀모형 기반 공간내삽법과 크리깅(Krging) 기반 공간내삽법이 많이 사용되었지만, 이들 공간내삽법의 성능을 서로 비교한 연구는 거의 없는 실정이다. 따라서 본 연구는 대구시 달서구를 사례로 지가를 추정하는데 회귀모형 기반 공간내삽법과 크리깅 기반 공간내삽법을 적용해 보고 그 정확성을 평가하였다. 회귀모형 기반 공간내삽을 위해 최소자승모형(OLS), 공간지체모형(SLM), 공간오차모형(SEM), 지리가중회귀모형(GWR)을 사용하였고, 크리깅 기반 공간내삽을 위해 단순 크리깅(SK), 정규 크리깅(OK), 일반 크리깅(UK), 공동 크리깅(CK)을 이용하였다. 먼저, 전역적 정확성 지수인 평균 제곱근 오차(RMSE), 수정된 평균 제곱근 오차(adjusted RMSE), 분산지수(COD)를 이용하여 그 정확성을 통계적으로 평가하였다. 다음으로, 3차원 잔차도와 산점도를 이용하여 그 정확성을 시각적으로 서로 비교하였다. 통계적 및 시각적 분석결과에 의하면, 공간적 의존성을 반영할 수 있는 공간회귀모형(SAR)과 크리깅 기법들 보다 공간적 이질성을 고려할 수 있는 GWR이 사례지역에서 지가를 추정하는데 상대적으로 정확한 공간내삽방법인 것으로 나타났다. 본 연구의 결과는 지가를 통해 도시의 공간구조를 분석하는 이차적 연구에 기여할 것이다.

• 대한원격탐사학회지
• /
• 제35권1호
• /
• pp.1-13
• /
• 2019

The advent of a fourth industrial revolution, built on advances in digital technology, has coincided with studies using various unmanned aerial vehicles (UAVs) being performed worldwide. However, the accuracy of different sensors and their suitability for particular research studies are factors that need to be carefully evaluated. In this study, we evaluated UAV photogrammetry using smart technology. To assess the performance of digital photogrammetry, the accuracy of common procedures for generating orthomosaic images and digital surface models (DSMs) using terrestrial laser scanning (TLS) techniques was measured. Two different type of non-surveying camera(Smartphone camera, fisheye camera) were attached to UAV platform. For fisheye camera, lens distortion was corrected by considering characteristics of lens. Accuracy of orthoimage and DSM generated were comparatively analyzed using aerial and TLS data. Accuracy comparison analysis proceeded as follows. First, we used Ortho mosaic image to compare the check point with a certain area. In addition, vertical errors of camera DSM were compared and analyzed based on TLS. In this study, we propose and evaluate the feasibility of UAV photogrammetry which can acquire 3 - D spatial information at low cost in a construction site.

• Journal of information and communication convergence engineering
• /
• 제13권2호
• /
• pp.105-112
• /
• 2015

The estimation of missing sensor values is an important problem in sensor network applications, but the existing approaches have some limitations, such as the limitations of application scope and estimation accuracy. Therefore, in this paper, we propose a new estimation model based on a spatial-temporal correlation analysis (STCAM). STCAM can make full use of spatial and temporal correlations and can recognize whether the sensor parameters have a spatial correlation or a temporal correlation, and whether the missing sensor data are continuous. According to the recognition results, STCAM can choose one of the most suitable algorithms from among linear interpolation algorithm of temporal correlation analysis (TCA-LI), multiple regression algorithm of temporal correlation analysis (TCA-MR), spatial correlation analysis (SCA), spatial-temporal correlation analysis (STCA) to estimate the missing sensor data. STCAM was evaluated over Intel lab dataset and a traffic dataset, and the simulation experiment results show that STCAM has good estimation accuracy.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.274-276
• /
• 2003

The traditional crop productivity simulations based on crop models are normally site-specific. To simulate regional crop productivity, the spatial crop model is developed in this study by integrating Geographical Information System (GIS) with Erosion Productivity Impact Calculator (EPIC) model. The integration applied a loose coupling approach. Data are exchanged using ASCII or binary data format between GIS and EPIC model without a common user interface. The spatial EPIC model is conducted to simulate the average corn and wheat productivity of 1980s in North China. The results show that the simulation accuracy of the spatial EPIC model is acceptable. The simulation accuracy can be improved by using the detailed crop management information, such as irrigation, fertilizer and tillage schedule.