• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.511-518
• /
• 2000

Characteristics of joint orientation, length, spacing and their distribution are very important factors for slope stability, Especially, the effect of joint spacing is an essential factor of slope stability. This study is to analyze the effect of joint spacing in cases of sliding and toppling, which is a typical failure mode. Joint spacing can divided into vertical spacing(spacing) and horizontal spacing(gap). And then, the spacing/length ratio of joint directly affect rock slope failure. When the ratio is below 0.05, the possibility of failure is rapidly increased. In case of toppling, the possibility of failure depends on the ratio of spacing to height of slope ratio slope. As the ratio decreases, the possibility of toppling failure increased. The critical ratio of spacing to height of slope is determined by the dip angle of the slope and the orientation of joint sets.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1095-1099
• /
• 2008

Critical state theory involves two state boundary surface. One is Roscoe surface and the other is Hvorslev surface. The shape of these boundary surface was changed because of several parameters : Critical state constant(M), spacing ratio (r) and critical state pore pressure coefficient($\wedge$). As these constants make difference to each model and the way of solution, they may affect the shape of state boundary surface. Specially, spacing ratio (r) is important. On this study, triaxial compression test was performed using remolded weathered mudstone soil and investigated variation of state boundary surface because of spacing ratio. In the results of prediction, critical state point was located highly and the shape of boundary surface was changed more tightly curve as decreasing spacing ratio.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.117-123
• /
• 2004

The burning characteristics of interacting coal particles in a convective flow are numerically investigated at various Reynolds numbers. The transient combustion of 2-dimensionally arranged particles, both the fixed particle distances of 5 radii to 20 radii horizontally and 3 radii to 24 radii vertically, is studied. The results obtained from the present numerical analysis reveal that the transient flame configuration and retardation of particle temperature augmentation with the horizontal or vertical particle spacing substantially influence devolatilization process and carbon conversion ratio of interacting particles. Volatile release and carbon conversion ratio of the second particle with decreasing horizontal and vertical particle spacing decrease gradually, whereas those of the first particle with decreasing vertical particle spacing increases due to flow acceleration. When the vertical particle spacing is smaller than $6R_{o}$, volatile release and carbon conversion ratio of the second particle decrease greatly due to reduction of flame penetration depth.

• 한국산학기술학회논문지
• /
• 제18권1호
• /
• pp.302-309
• /
• 2017

이론적 연구를 통하여 말뚝지름과 말뚝설치간격, 성토재의 내부마찰각 그리고 성토고가 성토지지말뚝의 아칭효율에 미치는 영향을 살펴보았다. 성토지지말뚝 상부의 성토체에 발생하는 아치모델에 대하여 아칭효율을 계산함에 있어 아치의 천정부파괴 및 말뚝캡에 작용하는 하중계산을 통한 아칭효율이 같게 되는 임계 상대간격비를 구할 수 있는 식을 제시하였으며 설계에 유용하게 쓰일 것으로 판단된다. 본 연구에서 수행된 계산결과에 따르면 상대간격비가 작은 경우는 말뚝캡에 작용하는 하중을 통해 계산되는 아칭효율이 설계를 지배하게 됨을 알 수 있으며 상대간격비가 커질수록 아치의 천정부파괴에 의한 아칭효율이 설계를 지배함을 알 수 있다. 말뚝중심간 설치간격에 대한 말뚝지름의 비를 나타내는 ${\beta}$값이 커질수록 말뚝 캡에 작용하는 하중에 의해 계산되는 아칭효율이 설계를 지배하게 되는 임계 상대간격비가 작아짐을 알 수 있었는데 ${\beta}$값이 0.5인 경우 임계 상대간격비는 0.35이며 ${\beta}$값이 0.2인 경우 임계 상대간격비는 0.85이었다. 계산결과에 따르면 Rankine 수동토압계수($K_p$)가 클수록 임계 상대간격비는 작아져서 $K_p$가 5인 경우 임계 상대간격비는 0.23이었으며 $K_p$가 2인 경우 임계 상대간격비는 0.85이었다. 말뚝캡이 성토지반에 대해 차지하는 면적비가 9%인 경우 아칭효율은 54%이었으며 성토재의 수동토압계수가 3인 경우 아칭효율은 61%이었는데 두 경우 모두 말뚝캡에 작용하는 하중에 의해 계산되는 아칭효율이 지배하는 상대간격비가 0.5보다 큼을 알 수 있어 실제적인 설계에 적용될 수 있음을 알 수 있었다.

• 대한기계학회논문집B
• /
• 제29권12호
• /
• pp.1321-1328
• /
• 2005

The burning characteristics of interacting coal particles in a convective flow are numerically investigated at various Reynolds numbers. The transient combustion of 2-dimensionally arranged particles, both the fixed particle distances of 5 radii to 20 radii horizontally and 4 radii to 24 radii vertically, is studied. The results obtained from the present numerical analysis indicate that the transient flame configuration and retardation of particle temperature augmentation with the horizontal or vertical particle spacing substantially influence devolatilization process and carbon conversion ratio of interacting particles. Volatile release and carbon conversion ratio of the second particle with decreasing horizontal and vertical particle spacing decrease gradually, whereas those of the first particle with decreasing vertical particle spacing increase due to flow acceleration. When the vertical particle spacing is smaller than $6R_0$, volatile release and carbon conversion ratio of the second particle decrease due to reduction of flame penetration depth and interference of oxygen diffusion by the first particle.

• 한국지반공학회논문집
• /
• 제32권7호
• /
• pp.47-56
• /
• 2016

연약지반을 매립한 지반에 굴착을 시행할 경우 흙막이 벽체를 설치하더라도 굴착에 따른 굴착배면 지반의 지하수 유출로 배면지반에 지반파괴가 발생한다. 이를 최소화하기 위해 지반파괴 저감 대책으로 억지말뚝을 적용한 실내모형 실험을 시행하여 무보강일 경우와 억지말뚝 보강시를 비교하여 침하량이 약 3배 정도 차이가 발생하는 보강효과를 확인하였다(Kim, 2014). 금번 연구에서는 이런 억지말뚝의 보강효과 확인에 따른 적정한 억지말뚝 간격비의 평가를 시행하였다. 말뚝 간격비를 0.66(억지말뚝 5개)과 0.76(억지말뚝 3개)로 구분하여 실험한 결과 억지말뚝 적용이 굴착시 지반파괴 저감에 대하여 효과는 있으나 일정간격 이상 좁은 경우 오히려 하중으로 작용할 수 있어 설계시 적절한 간격비의 조정이 필요함을 알 수 있었으며, 본 연구에서는 지반파괴의 저감효과가 있으면서 굴착배면의 하중으로도 작용하지 않는 적정 간격비는 0.7~0.8 정도가 적합하다고 판단되었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.314-319
• /
• 2005

In this study, the combustion characteristics were investigated with the variation of design factors on multiple slit gas burner. The design factors consist of slit height, width, spacing, and inner length. The combustion characteristics were made analysis of the CO emission and NOx emission by using CO analyzer and NOx analyzer. The lower perimeter to area and the narrow spacing extends the lift-flame limit. The CO emission increases with the increasing perimeter to area ratio at the same condition. The NOx emission is found to be less significant with the port perimeter to area ratio. The flame interference might highly depend on the spacing and port perimeter to area ratio, and it also affects the burner performance.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권2호
• /
• pp.245-253
• /
• 2002

This study was focused on the effect of concrete strength and lateral ties of concrete columns using high-strength concrete. Thirty-six concrete columns with 20cm square cross-section were tested. Experimental parameters included the concrete strength, the distribution of longitudinal bars and the volumetric ratio, yield strength, spacing of lateral ties. From the experiments, we found that: 1) the increasing rate of the strength and ductility of concrete columns caused by confinement of lateral ties was decreasing, as the concrete strength increased. 2) The high volumetric ratio and the reduction of tie spacing had a tendency to enhance the strength and improve the ductility. 3) The high-strength concrete columns required high volumetric ratio of lateral ties to maintain the proper strength and ductility. It was observed that the current AIK design code to specify the maximum tie spacing of high-strength concrete columns led to the poor strength and ductility for seismic design.

• 한국방사선학회논문지
• /
• 제10권5호
• /
• pp.359-365
• /
• 2016

투시조영촬영은 인체 내부의 조직이나 장기를 검사할 때 시행하며 특히 척추 질환의 진단 및 시술에 사용된다. 영상증배관(image intensifier tube)을 사용하는 투시조영 촬영장비는 영상에서 중심부보다 주변부에 왜곡이 나타난다. 본 연구에서는 교정 알고리즘을 적용하여 교정전과 교정후의 수직길이비 왜곡비율과 대각길이비의 왜곡비율을 측정하였다. 수직길이비의 측정결과는 교정후의 표준편차가 교정전보다 0.04감소하였고 대각길이비의 측정결과는 교정후의 표준편차가 교정전보다 0.06감소하여 교정 후 투시영상의 왜곡이 감소되었다. 향후 교정 알고리즘의 적용과 성능향상을 통해서 영상왜곡을 감소시키면 요추디스크의 치료를 위한 수핵감압술시 요추천자의 정확한 위치를 찾는데 도움을 줄 것으로 사료된다.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.360-362
• /
• 2002

Myocardial tagging technique such as spatial modulation of magnetization (SPAMM) allows the study of myocardial motion with high accuracy. Tagging contrast of such a tagging images can affect to the accuracy of the estimation of tag intersection in order to analyze the myocardial motion. Tagging contrast can be affected by tagline spacing. The aim of this study was to investigate the relationship between tagline spacing of SPAMM image and tagging contrast-to-noise ratio (CNR) experimentally. One healthy volunteer was undergone electrocardiographically triggered MR imaging with SPAMM-based tagging pulse sequence at a 1.5T MR scanner (Gyroscan Intera, Philips Medical System, Netherland). Horizontally modulated stripe patterns were imposed with a range from 3.6mm to 9.6mm of tagline spacing. Images of the left ventricle (LV) wall were acquired at the mid-ventricle level during cardiac cycle with FEEPI (TR/TE/FA=5.8/2.2/10). Tagging CNR for each image was calculated with a software which developed in our group. During contraction, tagging CNR was more rapidly decreased in case of short tagline spacing than in case of long tagline spacing. In the same heart phase, CNR was increased corresponding with tag line spacing. Especially, at the fully contracted heart phase, CNR was more rapidly increased than the other heart phases as a function of tagline spacing.