• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.134-140
• /
• 2007

Since the successful launch of Sputnik 1, a rocket engine was evolved rapidly. The first artificial satellite Sputnik has only 182 lb mass with a size of a basket ball, a modern artificial satellite is over 10 tons. As the size and the mass of an artificial satellite increases, the stronger launch vehicles are required. However, the story is different in the field of the rocket engine development. In the early to mid age of the space race, rocket engine study was focused on the stronger and bigger engine development, but from the 80's the tide has changed. A rocket engine must be strong and also economic. This trend was accelerated from when a rocket launch was used commercially. In this study, a capability of the launch vehicle and engine was investigated to provide a reference for a liquid rocket engine development plan.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.689-695
• /
• 2011

In this paper, available power generation on the road from renewable energy technologies on how to use the piezoelectric effect has been studied. A lot of vehicles on road that can generate electricity using renewable energy technology as part of the external shock to convert the load into electrical energy using piezoelectric effect piezoelectric generator can be applied to road space. Piezoelectric power harvesting using piezoelectric ceramics for the development of impact load characteristics were tested as function of various experimental design such as generator design and array of piezo-ceramic. To design the piezoelectric generator, the characteristics of piezoelectric ceremic were compared depending on the type of impact load as function of impact load, shock-absorbing.

• Journal of Advanced Navigation Technology
• /
• v.18 no.6
• /
• pp.562-568
• /
• 2014

This study is safety assessment standard for advanced surface movement guidance control system (A-SMGCS) and case study of the past research project. A-SMGCS providing routing, guidance and surveillance for the control of aircraft and vehicles in order to maintain the declared surface movement rate under all weather conditions within the aerodrome visibility operational level while maintaining the required level of safety. Recently, in korea and europe are developing A-SMGCS system for the safety control of the airport movement area. In safety oriented industry such as aviation that it is necessary to verify and ensure for operating system. In this case study, analysis of safety assessment standard for verified A-SMGCS target level of safety (TLS) and previous developed A-SMGCS research project.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9C
• /
• pp.573-580
• /
• 2011

WSNs (Wireless Sensor Networks) are becoming more widely used in various fields, and improving localization performance is a crucial and essential issue for sensor network applications. In this paper, we propose a low-complexity localization mechanism for WSNs that operates in 3D (Three-Dimensional) space. The basic idea is to use aerial vehicles or flying objects that are deliberately equipped with the anchor nodes. These anchor nodes periodically broadcast beacon signals containing their current locations, and the unknown nodes receive these signals as soon as they enter the communication range of the anchors. We estimate the locations of the unknown nodes based on the proposed scheme that transforms the 3D problem into 2D computations to reduce the complexity of 3D localization. Simulated results show that our approach is an effective scheme for 3D self-positioning in WSNs.

• Composites Research
• /
• v.30 no.6
• /
• pp.331-337
• /
• 2017

The composite lattice structures have advantages of high specific stiffness and strength and are mainly applied to the structures of launch vehicles that carry the compressive load. However, since these structures are manufactured by filament winding technology, there are some defects and voids found in the knots. For these reasons, the stiffness and strength of the lattice structures have to be compared with finite element model for predicting design load. But, the full scale test is difficult because time and space are limited and the shape of structure is complex, and hence the simple and reliable test methods for examination of stiffness are needed. In this paper, subelements of composite lattice structures were prepared and compressive and bending test were conducted for examination of stiffness of helical and hoop rib. Test methods for subelements of composite lattice structures that has curved and twisted shape were supposed and compared with finite element analysis results.

• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.63-69
• /
• 2010

Since speed limit enforcement in school zones is the most important to reduce the occurrence of severe child related accidents, school zones typically have a speed limit of 30km/h. However, it is found that the majority of vehicles passing school zones are traveling over 30km/h. This indicates that school zones are not being effectively operated to achieve the main objective which is the reduction of child related accidents. This study aims to identify the factors affecting the violation of speed limits in school zones through the results of field survey from 8 elementary schools. The results showed that time period, the number of lanes, the width of sidewalks, and the status of colored pavement were found to be highly associated with the violation of speed limits in school zones at the 95% significance level. The results of this study may provide some insights for making safe environments around schools.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.2
• /
• pp.115-122
• /
• 2012

Sound packages and damping materials have been widely applied on the floor to decrease the interior noise of a vehicle. Based on the previous researches on the low-noise vehicles, weight optimization through minimization of damping material usage is required while decreasing mid and high frequency range noise by application of sound packages. This paper describes the analysis process of robust design of vehicle body structure before applying damping materials and focuses on the analysis and test process of the location optimization at the stage of damping material application. A vibration experiment for the analysis of floor panel velocity with respect to the excitation of suspension attachment parts at the underfloor of a vehicle is performed. And through the improvement correlation between FEA and TEST, a design guide to optimize damping materials application in the early design stage is proposed. A research on vibration damping steel sheets and liquid acoustic spray on deadener(LASD) is performed to minimize manufacturing time and to minimize the space for pre-existing asphalt damping materials. As results of this study, panel stiffness is achieved through curved surface panel and bead optimization. And test baseline of optimum design is suggested through damping material optimization. And finally, through re-establishing the analysis process for vibration reduction of vehicle floors and lightweight design of damping materials, it is possible to design damping materials efficiently in the preceding stage of design.

• Explosives and Blasting
• /
• v.38 no.3
• /
• pp.1-14
• /
• 2020

Stereophotogrammetry can be used for accurate and fast investigation of over-break or under-break which may form during the blasting of underground space. When integrated with small unmanned aerial vehicles(UAVs) or drones, stereophotogrammetry can be performed much more efficiently. However, since previous research are mostly focused on surface environments, underground applications of drone-based stereophotogrammetry are limited and rare. In order to expand the use of drone-based stereophotogrammetry in underground environments, this study investigated a rock surface of a underground mine through drone-based stereophotogrammetry. The accuracy of the investigation was evaluated and analyzed, which proved the method to be accurate in underground environments. Also, recommendations were proposed for the image acquisition and matching conditions for accurate and efficient application of drone-based stereophotogrammetry in underground environments.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.3
• /
• pp.40-47
• /
• 2014

The grain burn-back analysis has been performed for the internal ballistics analysis code to be used for the optimal design of the space launch vehicles. The grain burn-back has been used to calculate the burning surface that is essential to the internal ballistics. The calculation of internal ballistics code used in the optimal design is repeated until satisfying the required performance through the change of the design parameter. Therefore, the burn-back method applied to the internal ballistics analysis should be easy to change the design parameter and calculation time should be short. In this study, a burn-back analysis code has been developed using the analysis method. Also, geometric parameters of the grain have been selected and organized. The developed code has been verified by comparison of results of a numerical method.

• Structural Monitoring and Maintenance
• /
• v.6 no.4
• /
• pp.317-346
• /
• 2019

Performance assessment of pavements proves useful, in terms of handling the ride quality, controlling the travel time of vehicles and adequate maintenance of pavements. Roughness profiles provide a good measure of the deteriorating condition of the pavement. For the accurate estimates of pavement roughness from dynamic vehicle responses, vehicle parameters should be known accurately. Information on vehicle parameters is uncertain, due to the wear and tear over time. Hence, condition monitoring of pavement requires the identification of pavement roughness along with vehicle parameters. The present study proposes a scheme which estimates the roughness profile of the pavement with the use of accurate estimates of vehicle parameters computed in parallel. Pavement model used in this study is a two-layer Euler-Bernoulli beam resting on a nonlinear Pasternak foundation. The asphalt topping of the pavement in the top layer is modeled as viscoelastic, and the base course bottom layer is modeled as elastic. The viscoelastic response of the top layer is modeled with the help of the Burgers model. The vehicle model considered in this study is a half car model, fitted with accelerometers at specified points. The identification of the coupled system of vehicle-pavement interaction employs a coupled scheme of an unbiased minimum variance estimator and an optimization scheme. The partitioning of observed noisy quantities to be used in the two schemes is investigated in detail before the analysis. The unbiased minimum variance estimator (MVE) make use of a linear state-space formulation including roughness, to overcome the linearization difficulties as in conventional nonlinear filters. MVE gives estimates for the unknown input and fed into the optimization scheme to yield estimates of vehicle parameters. The issue of ill-posedness of the problem is dealt with by introducing a regularization equivalent term in the objective function, specifically where a large number of parameters are to be estimated. Effect of different objective functions is also studied. The outcome of this research is an overall measure of pavement condition.