• Korean Journal of Remote Sensing
• /
• v.37 no.5_2
• /
• pp.1235-1243
• /
• 2021

Geostationary Ocean Color Imager 2 (GOCI-II) on Geo-KOMPSAT-2 (GK2B)satellite was developed as a mission successor of GOCI on COMS which had been operated for around 10 years since launch in 2010 to observe and monitor ocean color around Korean peninsula. GOCI-II on GK2B was successfully launched in February of 2020 to continue for detection, monitoring, quantification, and prediction of short/long term changes of coastal ocean environment for marine science research and application purpose. GOCI-II had already finished IAC and IOT including early in-orbit calibration and had been handed over to NOSC (National Ocean Satellite Center) in KHOA (Korea Hydrographic and Oceanographic Agency). Radiometric calibration was periodically conducted using on-board solar calibration system in GOCI-II. The final calibrated gain and offset were applied and validated during IOT. And three video parameter sets for one day and 12 video parameter sets for a year was selected and transferred to NOSC for normal operation. Star measurement-based INR (Image Navigation and Registration) navigation filtering and landmark measurement-based image geometric correction were applied to meet the all INR requirements. The GOCI2 INR software was validated through INR IOT. In this paper, status and results of IOT, radiometric calibration and INR of GOCI-II are analysed and described.

• 기호학연구
• /
• no.57
• /
• pp.155-176
• /
• 2018

This article is a study of Karl Marx's manifesto and the reform in donghak for the modality and their symbolism. As a text, Karl Marx and Friedrich Engels' declaration on the Communist Alliance and the reform program of the peasant Donghak were choose. This Declaration and the Reformation are the works of philosophical practice discourse of the 1800s in this article, which unfolds paradigmatically, deriving its common symbolic meaning in the semiotic sense, and evolving ideologically towards a democracy free of property. In the end, these two historical incident which are published in the contemporary breath, constitute an accusation against a nonhuman policy of surveillance and punishment. Twice a day, the space of the church is transformed into a factory, the act of dividing into two categories by capitalist and work and divorcing by accident is embodied as a social ethic. It is against the phenomenon that the structure of which no man exists is no longer institutionalized. The revolutionary movement aimed at breaking the framework of this hunt manifests itself in the two manifestos mentioned above, and Karl Marx completes the culmination of the utopia that must be achieved through the Declaration of the Communist Alliance by placing his being in the position of "eternal refugee". By choosing to die in his freedom developed during Jeon Bong-joon's trial, he also completes the people's spirit of revolution. In the case of simultaneous exploitation in East and West, the form of oppression is the withdrawal of capital from domination and power, and a new alternative to this is the philosophical context that allows the establishment of a new paradigm with "man is the greatest capital".

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.1
• /
• pp.140-153
• /
• 2019

Cloase-range image information from drones and ground-based camera has been frequently used in the field of disaster mitigation with 3D modeling and mapping. In addition, the utilization of virtual reality(VR) is being increased by implementing realistic 3D models with the VR technology simulating disaster circumstances in large scale. In this paper, we created a VR training program by extracting realistic 3D models from close-range images from unmanned aircraft and digital camera on hand and observed several issues occurring during the implementation and the effectiveness in the case of a VR application in training for disaster mitigation. First of all, we built up a scenario of disaster and created 3D models after image processing with the close-range imagery. The 3D models were imported into Unity, a software for creation of augmented/virtual reality, as a background for android-based mobile phones and VR environment was created with C#-based script language. The generated virtual reality includes a scenario in which the trainer moves to a safe place along the evacuation route in the event of a disaster, and it was considered that the successful training can be obtained with virtual reality. In addition, the training through the virtual reality has advantages relative to actual evacuation training in terms of cost, space and time efficiencies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.586-593
• /
• 2019

The purpose of this study is to investigate the perception of fire safety education in middle and high school teachers. The results of this study provide basic data necessary for future school safety education. The research was carried out using a questionnaire given to 317 school teachers. The frequency of the questionnaire was calculated from frequency analysis using SPSS version 19.0. A chi-square test was conducted to verify the analyzed questionnaire data. Cronbach's alpha for fire safety awareness in the respondents is 0.845, which is very reliable. According to the results of the survey, fire safety education currently conducted in schools is aimed at having a safe lifestyle and respect for life. The training is conducted once every six months, on average, and training time is 30 to 45 minutes. Fire safety education in schools is conducted in the form of experience-oriented education in cooperation with fire-related organizations following the plan of the school. Educational texts are used and utilized through the Internet and in related publications. Under the present circumstances, it is necessary to secure sufficient space to run an experience-related education program and to actively participate in the students' fire safety education at the school.

• Journal of Korean Dental Science
• /
• v.12 no.1
• /
• pp.13-19
• /
• 2019

Purpose: The aim of this study was to compare the flexural strength of provisional fixed dental prostheses which was three-dimensional (3D) printed by several build directions. Materials and Methods: A metal jig with two abutment teeth and pontic space in the middle was fabricated. This jig was scanned with a desktop scanner and provisional restoration was designed on dental computer-aided design program. On the preprocessing software, the build angles of the restorations were arranged at $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, and $90^{\circ}$ and support was added and resultant structure was sliced to a thickness of $100{\mu}m$. Processed restorations were printed with digital light processing type 3D printer using poly methyl meta acrylate-based resin. After washing and post-curing, compressive loading was applied at a speed of 1 mm/min on a metal jig fixed to a universal testing machine. The maximum pressure at which fracture occurred was measured. For the statistical analysis, build direction was set as the independent variable and fracture strength as the dependent variable. One-way analysis of variance and Tukey's post hoc analysis was conducted to compare fracture strength among groups (${\alpha}=0.05$). Result: The mean flexural strength of provisional restoration 3D printed with the build direction of $0^{\circ}$ was $1,053{\pm}168N$; it was $1,183{\pm}188N$ at $30^{\circ}$, $1,178{\pm}81N$ at $45^{\circ}$, $1,166{\pm}133N$ at $60^{\circ}$, and $949{\pm}170N$ at $90^{\circ}$. The group with a build direction of $90^{\circ}$ showed significantly lower flexural strength than other groups (P<0.05). The flexural strength was significantly higher when the build direction was $30^{\circ}$ than when it was $90^{\circ}$ (P<0.01). Conclusion: Among the build directions $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, and $90^{\circ}$ set for 3D printing of fixed dental prosthesis, an orientation of $30^{\circ}$ is recommended as an effective build direction for 3D printing.

• Korean Journal of Materials Research
• /
• v.29 no.7
• /
• pp.437-442
• /
• 2019

Green $BaSi_2O_2N_2:0.02Eu^{2+}$ phosphor is synthesized through a two-step solid state reaction method. The first firing is for crystallization, and the second firing is for reduction of $Eu^{3+}$ into $Eu^{2+}$ and growth of crystal grains. By thermal analysis, the three-time endothermic reaction is confirmed: pyrolysis reaction of $BaCO_3$ at $900^{\circ}C$ and phase transitions at $1,300^{\circ}C$ and $1,400^{\circ}C$. By structural analysis, it is confirmed that single phase [$BaSi_2O_2N_2$] is obtained with Cmcm space group of orthorhombic structure. After the first firing the morphology is rod-like type and, after the second firing, the morphology becomes round. Our phosphor shows a green emission with a peak position of 495 nm and a peak width of 32 nm due to the $4f^65d^1{\rightarrow}4f^7$ transition of $Eu^{2+}$ ion. An LED package (chip size $5.6{\times}3.0mm$) is fabricated with a mixture of our green $BaSi_2O_2N_2$, and yellow $Y_3Al_5O_{12}$ and red $Sr_2Si_5N_8$ phosphors. The color rendering index (90) is higher than that of the mixture without our green phosphor (82), which indicates that this is an excellent green candidate for white LEDs with a deluxe color rendering index.

• Journal of Environmental Impact Assessment
• /
• v.28 no.1
• /
• pp.23-34
• /
• 2019

Global warming becomes a serious issue that poses subsidiary issues like a sea level rise or a capricious climate over the world. Because of severe heat-wave of the summer in Korea in 2016, a big attention has been focused on urban heat island since then. Not just about heat-wave itself, many researches have been concentrated on how to adapt in this trendy warming climate and weather in a small scope. A big part of existing studies is mitigating "Urban Heat Island effect" and that is because of huge impervious surface in urban area where highly populated areas do diverse activities. It is a serious problem that this thermal context has a high possibility causing mortality by heat vulnerability. However, there have been many articles of a green infrastructures' cooling impact in summer. This research pays attention to measure cooling effect of a street planting considering urban canyon and type of green infrastructures in neighborhood scale. This quantitative approach was proceeded by ENVI-met simulation with a spatial scope of a commercial block in Seoul, Korea. We found the dense double-row planting is more sensitive to change in temperature than that of the single-row. Among the double-row planting scenarios, shrubs which have narrow space between the plant and the land surface were found to store heat inside during the daytime and prevent emitting heat so as to have a higher temperature at night. The quantifying an amount of vegetated spaces' cooling effect research is expected to contribute to a study of the cost and benefit for the planting scenarios' assessment in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.20-25
• /
• 2019

In this paper, the structural weakness analysis and quality improvement of small fixed wing UAV of the hard landing type were studied. Unlike conventional aircraft, small UAV does not use runways because of its small size. Instead, small UAV use hand launch takeoff and hard landings. This type has many operational advantages because it can take off and land in a narrow space. But, the hard landing has a strong impact on the structure of the UAV and can cause serious damage. In order to analyze the exact cause of this phenomenon, the structural analysis was carried out using the 3D structural analysis program (ABAQUS) to identify the location of the fracture. And to improve the accuracy of the structural analysis, properties of the material were obtained through specimen test. As a result of the analysis, structural weaknesses were identified and improved. Thus, the validity of the study was verified by demonstrating the quality of enhanced structure through a real impact test at a higher level of 1.5 times the maximum impact during operation.

• Journal of Food Hygiene and Safety
• /
• v.34 no.2
• /
• pp.199-204
• /
• 2019

This study aimed to generate a probability distribution model based on temperature data of frozen food storage facility as input variables for microbial risk assessment (MRA). We visited 8 food-handling businesses to collect temperature data from their cold storage warehouses. The overall mean temperature inside the storage facilities was $-20.48{\pm}3.08^{\circ}C$, with 20.4% of the facilities having above $-18^{\circ}C$, with minimum and maximum temperature values of -10.3 and $-25.80^{\circ}C$ respectively. Temperature distributions by space locations of natural and forced convection were $-22.57{\pm}0.84$ and $-17.81{\pm}1.47^{\circ}C$, $-22.49{\pm}1.05$ and $-17.94{\pm}1.44^{\circ}C$, and $-22.68{\pm}1.03$ and $-18.08{\pm}1.42^{\circ}C$ in the upper (2.4~4 m), middle (1.5~2.4 m), and lower (0.7~1.5 m) shelves, respectively. Probability distributions from the temperature data were obtained using the program @RISK. Statistical ranking was determined using goodness of fit to determine the probability distribution model. Our results show that a log-normal distribution [5.9731, 3.3483, shift (-26.4281)] is most appropriate for relative MRA conduction.

• The Journal of KAIRB
• /
• v.3 no.1
• /
• pp.11-18
• /
• 2021

Purpose: The purpose of this study is to investigate a satisfaction survey of untact education and platforms that can be used for untact education to provide recommendations on future development of Education of Persons Conducting Clinical Trials. Methods: Online survey was distributed among students who have taken Untact Education of Persons Conducting Clinical Trials. The result was separated according to topic and descriptive statistics was used for analysis. The satisfaction survey used 10-point scale. Results: Of the 1,720 students who received the survey, 1,347 (78.3%) responded to the lecture satisfaction survey. The satisfaction level for broadcasting program (Kakao TV), an untact educational platform for the education of clinical trial workers at Kyung Hee University Medical Center, was relatively high with 8.09±1.99 points. Average score respondents recommending Kyung Hee University Untact Education of Persons Conducting Clinical Trials was 8.03±1.83 and customer recommendation score (Net Promotor Score) was 27.1%. Satisfaction level of the preferred training time was divided into weekday-morning (8-11 AM) (8.16±1.75), weekday-afternoon (12-4 PM) (7.73±2.07), weekday-evening (5-9 PM) (7.78±2.22), and weekend-morning (9-11 AM) real-time untact education (8.48±1.76) and analyzed. There was a noticeable difference between weekend-morning and weekday-afternoon (p<0.0001) and weekend-morning and weekday-evening (p=0.0001) real-time untact education. When asked about conducting education after COVID-19 pandemic ends, 79.2% (1,012 of 1,279) of the respondents answered that they prefer real-time untact education while 20.8 % (266 of 1,279) preferred face-to-face education. Conclusion: Online education, without time and space constraint, is expected to be the mainstream market in Korea for Education of Persons Conducting Clinical. Kyung Hee University Untact Education of Persons Conducting Clinical has achieved above average satisfaction using Kakao TV. Kyung Hee University Real-time Untact Education of Persons Conducting Clinical Net Promotor Score is 27.1%, which is above industry average, communication with trainees should be considered to improve Net Promotor Score.