본 논문에서는 UWB 시스템이 근처의 단일 장비 또는 집단 장비와의 간섭영향이 방송통신서비스에 미치는 영향에 관한 연구를 하였다. 이를 위해 UWB 시스템에서 방사되는 불요 방사 레벨에 따른 신호의 간섭을 비롯한 전파 간섭 특성이 인접 대역인 2.6425GHz SDMB(Satellite Digital Multimedia Broadcasting)와, In-band 대역인 3.4125GHz 방송 중계망과 서비스에 미치는 간섭영향의 정도를 비교 분석하였으며, 방송 중계망과 간섭측정 장비의 변조방식은 Impulse 방식과 OFDM 방식을 사용하였다. SDMB 시스템에서 Impulse 방식은 2m 지점에서부터 간섭 영향이 발생하여 1.4m 지점에서 방송 신호 수신이 가능한 $BER\;=\;1{\times}\;10^{-4}$ 이었으며, OFDM 방식은 0.8m 지점에서부터 간섭 영향을 받아 0.5m 지점에서 방송 신호 수신이 가능한 $BER\;=\;1{\times}\;10^{-4}$ 이었다. 또한 Gap-Filler 중심 주파수에 대해서는 0.01m 이상 이격 시는 간섭영향이 없었다. 따라서 소출력인 UWB 시스템의 전파가 방송통신서비스에 간섭 영향 없이 시스템에 적용하기 위해서는 Impulse 방식의 UWB 시스템보다 OFDM 방식의 UWB 시스템이 간섭 영향이 적다는 것을 확인하였다.
The important properties of EVA (ethylene vinyl acetate) redispersible polymer was waterproof, densification of internal pore space of concrete and ball bearing and micro filler. Also, the significant role of polypropylene(PP) fiber was crack control and blockade of movement for deterioration factors. The most studies for EVA were limited in the field of mortar and PP fiber reinforced concrete had been studied in the state of being restricted unit water content, rich mix and mixing much of the fiber without considering construction site. Therefore, the control mix design were applied in ready mixed concrete using 10 % fly ash of total cement weight used in batch plant. On the basis of control mix design, EVA contents ranging from 0 % to 10 % of total cement weight and PP fiber contents ranging from 0 % to 0.5 % of EVA concrete volume were used in the mix designs. The results showed the maximum compressive strength value was measured at EVA 5.0 % and PP fiber 0.1 %, the minimum water absorption ratio was at EVA 10 % and PP fiber 0 %, the durability factor for freezing and thawing resistance was at EVA 5.0 % and PP fiber 0.3 % and the minimum weight reduction ratio of resistance to sulfuric acid attack was at EVA 10 % and PP fiber 0.5 % after curing age 42days. Meanwhile, From these results, PP fiber reinforced EVA concrete would be very benefit, if each optimal mix types were used in hydraulic structures, underground utilities and agricultural structures.
The placement of different graft materials and/or the use of occlusive membranes to cover the extraction socket entrance are techniques aimed at reducing alveolar ridge resorption and enhancing bone formation. However, in spite of its clinical advantage, the use of graft materials in fresh extraction socket has been questioned because particles of the grafted material have been found in alveolar sockets with fibrous union. The purposes of this study were to evaluate whether alveolar ridge resorption following tooth extraction could be reduced and bone formation could be enhanced by the application of absorbable gelatin spongy or gelatin spongy soaked with platelet rich plasma(PRP) used as a space filler in clinical and radiographic aspects. Eighty patients who were scheduled for extraction of both third molars were participated and carried out by one experienced surgeon. Following extraction of teeth, one extracted socket were treated with gelatin spongy as an experimental group A and the other were treated with gelatin spongy and PRP as an experimental group B. The routine extracted socket were healed without any treatment as a control group. From the period of extraction to 12 weeks postoperatively, we examined the clinical course and radiographic evaluation on socket at regular interval. Both experimental groups showed faster wound healing process than control clinically. Vertical gingival height of the extraction socket were less changed statistically in both experimental groups than control. The horizontal width change of the extraction socket were not significant statistically in any group. Radiographic changes of the alveolar bone height were less changed in both experimental groups and bone density were showed higher than control. There were a little difference between experimental group A and B. In conclusion, absorbable gelatin sponge and with PRP were considered as having preservation effects of extraction socket and stimulation of bone formation process after extraction.
본 연구에서는 새로운 형태의 에폭시 -광물 라노복합재료를 합성하기 위한 충전재를 층상 화합물인 나트륨-montmorillonite (Na-MMT)와 octadecyltrimethylammonium bromide와의 이온교환 반응으로부터 얻었다. 이렇게 합성된 octadecyltrimethylammonium-MMT에 3-aminopropyl triethoxysilane (APS)를 반응시켜 층상물질의 내부에 aminopropyl기가 삽입된 $C_{18}$ H$_{37}$ N($CH_3$)$_3$-APS-MMT를 합성하였다. 개질된 MMT의 층간저리와 구조를 X-선 회절 (XRD), IR 그리고 고상 $^{29}$ Si CP/MAS NMR을 이용하여 확인하였다. 이어서 $C_{18}$ H$_{37}$ N($CH_3$)$_3$-APS-MMT 존재하에 diglycidyl ether of bisphenol A (DGEBA)를 중합시켜 광물-고분자 나노복합재료를 합성하였다. 그리고 얻어진 나노복합재료의 구조를 XRD, 투과전자현미경 (TEM) 그리고 주사전자현미경 (SEM)으로 확인하였다. 확인 결과 합성된 유기몬모릴로나이트는 에폭시 고분자 내에서 실리케이트 층이 완전히 박리되어 있으며 단일층으로 고분자 매트릭스 내에 잘 분산되어 있음을 알았다.
Park, Sang-Kyu;Bak, Koang-Hum;Cheong, Jin-Hwan;Kim, Jae-Min;Kim, Choong-Hyun
Journal of Korean Neurosurgical Society
/
제40권2호
/
pp.90-94
/
2006
Objective : Acute vertebral burst fractures warrant extensive fixation and fusion on the spine. Osteoplasty [vertebroplasty with high density resin without vertebral expansion] has been used to treat osteoporotic vertebral compression fractures. We report our experiences with osteoplasty in acute vertebral burst fractures. Methods : Twenty-eight cases of acute vertebral burst fracture were operated with osteoplasty. Eighteen patients had osteoporosis concurrently. Preoperative MRI was performed in all cases to find fracture level and to evaluate the severity of injury. Preoperative CT revealed burst fracture in the series. The patients with severe ligament injury or spinal canal compromise were excluded from indication. Osteoplasty was performed under local anesthesia and high density polymethylmethacrylate[PMMA] was injected carefully avoiding cement leakage into spinal canal. The procedure was performed unilaterally in 21 cases and bilaterally in 7 cases. The patients were allowed to ambulate right after surgery. Most patients discharged within 5 days and followed up at least 6 months. Results : There were 12 men and 16 women with average age of 45.3[28-82]. Five patients had 2 level fractures and 2 patients had 3 level fractures. The average injection volume was 5.6cc per level Average VAS [Visual Analogue Scale] improved 26mm after surgery. The immediate postoperative X-ray showed 2 cases of filler spillage into spinal canal and 4 cases of leakage into the retroperitoneal space. One patient with intraspinal leakage was underwent the laminectomy to remove the resin. Conclusion : Osteoplasty is a safe and new treatment option in the burst fractures. Osteoplasty with minimally invasive technique reduced the hospital stay and recovery time in vertebral fracture patients.
This study was performed to evaluate the effect of inorganic polyphosphate on bone formation in the calvaria of rabbit in the procedure of guided bone regeneration with bovine cancellous bone graft and titanium reinforced expanded polytetrafluoroethylene(TR-ePTFE) membrane. The rabbits were divided into four groups. Control group I used only TR-ePTFE membrane, control group II used TR-ePTFE membrane and deproteinized bovine bone mineral soaked in saline, experimental group III and IV used TR-ePTFE membrane and deproteinized bovine bone mineral soaked in 1% or 2% inorganic polyphosphate respectively. After decortication in the calvaria, GBR procedure was performed on 12 rabbits with titanium reinforced ePTFE membrane filled with deproteinized bovine bone mineral soaked in saline or inorganic polyphosphate. The animals were sacrificed at 2 weeks, 4 weeks, and 8 weeks after the surgery. Decalcified and non-decalcified specimens were processed for histologic and immunohistochemistric analysis. 1. Titanium reinforced ePTFE(TR-ePTFE) membrane showed good spacemaking and cell occlusiveness capability, but it showed poor wound stabilization. 2. The deproteinized bovine bone mineral did not promote bone regeneration, but it acted as a space filler. 3. There was no complete resorption of the deproteinized bovine bone mineral within 8 weeks. 4. 1% inorganic polyphosphate did not promote bone formation, but 2% inorganic polyphosphate promoted bone formation. Within the above results, 2% inorganic polyphosphate could be used effectively for bone regeneration.
고준위폐기물처분장에서 갭채움재는 완충재와 뒷채움재의 성능을 좌우하는 중요한 공학적방벽의 구성요소이다. 본 논문에서는 갭채움재에 대한 해외 기술현황을 조사하고, 이를 통하여 갭채움재의 개념, 제조기술, 성형특성, 설치기술에 대한 연구결과들을 정리하였다. 갭채움재 개념은 처분방식과 처분개념에 따라서 나라마다 약간씩 차이가 있었다. 갭채움재 물질로는 대부분 벤토나이트를 사용하였고, 충전제로 점토를 사용하였다. 갭채움재는 펠렛, 과립상, 또는 펠렛-과립상 혼합물의 형태로 사용되었다. 갭채움재 펠렛 제조에는 정압축, 롤러압축, 압출-컷팅 방법 등이 사용되었으며, 이 중, 실험과 실제 현장에서의 펠렛 소요량을 감안하여 많은 나라들이 롤러압축방법과 압출-컷팅방법에 대한 기술 확보에 집중하였다. 펠렛 성형특성 실험결과, 펠렛의 건조밀도와 건전성은 수분함량, 구성물질, 제조방법, 펠렛 크기에 민감하였고, 제작 시 압축하중에는 상대적으로 덜 민감하였다. 갭채움재의 설치방법으로는 수직처분공 완충재 갭에서는 부어넣기(pouring) 방법, 붓고 다지기(pouring and tamping) 방법, 진동을 주며 부어넣기(pouring with vibration) 방법 등이 시도되었으며, 수평처분공 완충재와 처분터널의 뒷채움재 갭에서는 숏크리트 기술을 이용한 불어넣기(blowing by use of shotcrete technology) 방법과 오거를 이용한 정치 및 다지기(auger placement and compaction) 방법 등이 시도되었다. 그러나 이 방법들은 아직 기술적으로 초기단계에 있어 앞으로도 계속적인 연구가 이루어질 것으로 예상되었다.
본 연구에 사용한 시멘트는 보통 포틀랜드 시멘트이며, 공극 최소화를 위한 충전재는 미세석영을 사용하였고 고강도화에 따른 취성파괴 문제를 개선하기위해 강섬유를 사용하여 압축강도 300 MPa 이상의 초고강도 분체콘크리트를 개발 하고자 하였다. 콘크리트의 강도를 크게 향상시키기 위한 연구의 일환으로 계면영역의 부착강도를 향상시킬 수 있는 크기 0.6 mm 이하의 규사, 백운석, 보크사이트, 페로실리콘을 선정한 후 각각의 배합비, 양생조건을 달리하여 압축강도를 비교분석 하였다. 초고강도 분체콘크리트는 보통콘크리트와 달리 사용재료의 영향이 대단히 중요하다. 분체 콘크리트의 압축강도 측정 결과 페로실리콘 > 보크사이트 > 백운석 > 규사 순으로 골재의 강도가 압축강도에 큰 영향을 미치는 경향을 알 수 있었으며 페로실리콘의 경우 시멘트 중량 기준하여 혼입량 110%일 때 가장 큰 강도를 나타내었다. SEM 촬영 결과 C-S-H수화물이 비교적 많이 생성되었고, 고온고압양생으로 토버모라이트와 조놀라이트가 생성된 것을 확인 하였다. 또한 골재의 세립화, 분체의 치밀충전화 및 반응성 재료의 사용으로 인해 페이스트가 고강도화 되고, 강섬유를 사용하여 인성을 보강함으로써, 28일 압축강도 341 MPa의 초고강도 분체콘크리트를 성공적으로 개발 하였다.
This study is carried out to make the environmentally affinitive porous planting block for revegetation and to make a effective program for greening plans. The summary is shown below. 1. In order to get stronger intensity and distribute proper porosity in the block for planting, the cements mixed with fine soil were used and the finer in soil grains gives the stronger in intensity of the cements. Use of the furnace slag cements instead of the portland cements showed relatively stronger in intensity of the block. The intensity of the block became stronger when the mixed ratio of the cements to soil is 5 : 1, but the pore space ratio was lower. The percolate pH of the portland cements after one month of treatment was 13.1 but the percolate pH of the furnace slag cements was shown lower. To mold proper porous planting blocks, the proper combination of additives such as the dehydrating agent, elastic agent and adhesives into the mixture of cements and soil gives better effectives. 2. After molding the porous planting blocks, it gave a better result when the grains of the filler made of peat moss, upland soil and compound fertilizer were smaller than 2 mm in size. Shaking of the filling materials also gave the better result, but it took more time and cost much more. Therefore, it was better when the filling materials were mixed with water first then flew down for stuffing. 3. It was necessary to cover with soil after seeding or planting on the porous planting blocks. The proper thickness of the soil to help root development and keep moisture is about 3~5 cm. 4. The plants for planting on the porous planting block were required stronger in the growth condition of their roots and their environmental adaptability. The average germination percentage and rate of Platycodon grandiflorum on the porous planting block were 88.8% and 85% accordingly and their rate is very uniform. The germination rates of Dianthus superbus var. longicalycinus and Taraxacum officinale were more than 50%. These grass species, Chelidonium majus var. asiaticum, Lysimachia mauritiana and Scabiosa mansenensis were the suggested biennial grasses in the planting area where exchanging of the seedling or nursery plants was not necessary because their germination rates were 59.3, 45.6 and 40.3% accordingly. Viola kapsanensis, Chrysanthemum sp., Taraxacum sp. and Iris ensata var. spontanea are the grass species that could be used by seeding for greening. However, the germination rate of Solidago virga-aurea var. asiatica, Aster scaber and Lythrum anceps were lower than 10%. The coverage ratio of Ixeris stolonifera is more than 80% after 60 days seeding and the root length of most of species are more than 10 cm except Iris ensata var. spontanea and Platycodon grandiflorum because their root developed thicker than other species.
이 실험은 이식재로 Deproteinated Bovine Bone Powder (DBBP)를 사용하였을 때와 골 이식재를 사용하지 않고 단순히 Absorbable Gelatin Sponge(AGS)만을 사용하였을 때의 BMP4와 BMP6의 상대적인 발현량을 real-time RT-PCR을 이용하여 비교해 보기 위한 것으로 다음과 같은 결과를 얻었다. 1. BMP4의 경우 처음 1일째와 3일째의 경우 DBBP군과 AGS군 모두 일정하게 증가하였으나 5일째 AGS군에서 감소하다가 7일째 다시 증가하였으며 9일째 다시 감소하였다. DBBP군에서는 7일까지 계속하여 증가하다가 9일째 감소하였다. DBBP군이 AGS군에 비해 발현의 양이 많은 경우가 많았지만 유의성은 없었다 (p>0.05). 2 BMP6의 경우 처음 1일째와 3일째의 경우 DBBP군과 AGS군 모두 일정하게 증가하였으나 5일째 AGS군에서 감소하다가 7일째 다시 증가하였으며 9일째 다시 감소하였다. DBBP군에서는 7일까지 계속하여 증가하다가 9일째 감소하였다. AGS군이 DBBP군에 비해 발현의 양이 많은 경우가 많았지만 유의성은 없었다 (p>0.05). 3. 두 군간에 동일시기에 BMP발현이 유의할 만한 차이를 보이지 않는 것은 DBBP와 AGS 모두 space retainer로서 작용을 하여 혈병중의 BMP발현의 양상이 비슷하기 때문으로 여겨진다. 4. 따라서 DBBP가 AGS에 비해 초기 골재생에 크게 유리한 점은 없는 것으로 여겨지며 초기 골 형성에서 BMP의 발현은 이식재의 종류가 아니라 물리적인 carrier로서의 작용이 더 중요한 것으로 여겨진다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.