• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.1
• /
• pp.1-14
• /
• 2006

Tropospheric aerosols are highly variant in time and space due to non-uniform source distribution and strong influence of meteorological conditions. Backscatter lidar measurement is useful to understand vertical distribution of aerosol. However, the backscatter lidar equation is undetermined due to its dependence on the two unknowns, extinction and backscattering coefficient. This dependence necessitates the exact value of the ratio between two parameters, that is, the lidar ratio. Also, Iidar ratio itself is useful optical parameter to understand properties of aerosols. Tropospheric aerosols were observed to understand variance of lidar ratio at Anmyeon island ($36.32^{/circ}N$, $126.19^{/circ}E$), Korea using a multi-wavelength raman lidar system developed by the Advanced Environmental Monitoring Research Center (ADEMRC), Gwangju Institute Science and Technology (GIST), Korea during measurement periods; March 15$\sim$April $16^{th}$, 2004 and May 24$\sim$ $8^{th}$ 2005. Extinction coefficient, backscattering coefficient, and lidar ratio were measured at 355 and 532 nm by the Raman method. Different types of aerosol layers were distinguished by the differences in the optical properties such as Angstrom exponent, and lidar ratio. The average value of lidar ratio during two observation periods was found to be $50.85\pm4.88$ sr at 355 nm and $52.43\pm15.15$ sr at 532 nm at 2004 and $57.94\pm10.29$ sr at 355 nm and $82.24\pm15.90$ sr at 532 nm at 2005. We conduct hysplit back-trajectory to know the pathway of airmass during the observation periods. We also calculate lidar ratio of different type of aerosol, urban, maritime, dust, continental aerosols using OPAC (Optical Properties of Aerosols and Clouds), Remote sensing of atmospheric aerosol using a multi-wavelengh lidar system with Raman channels is quite and powerful tool to characterize the optical propertises of troposheric aerosols.

• Tunnel and Underground Space
• /
• v.26 no.5
• /
• pp.384-395
• /
• 2016

Both the roughness measurement tests and the multi-stage shear tests were carried out on the 110 rock joint samples in order to investigate the influences of rock type, joint roughness and normal stress on the shear behaviour of rock joints. Test samples were composed of quartz porphyry, dacite, granite and gneiss, which were classified into three detailed groups according to their JRC values. Roughness parameters of rock joints were analyzed by roughness measurement tests, and shear characteristics were also investigated by multi-stage shear tests. Both peak shear strength and shear stiffness were increased as both joint roughness and normal stress were increased, whereas dilation angles showed lower values at the lower roughness and higher normal stress conditions. Besides, shear characteristics obtained from all tests of four different rock types with different rock strengths showed irrelevant details, therefore the influences of both joint roughness and normal stress on shear behaviors were found to be more considerable than the strength of intact rock. The results obtained from both multi-stage shear tests and direct shear tests were finally compared, where the dilation angles obtained from multi-stage shear tests were found to be valid only for the first normal stress conditions.

• Tunnel and Underground Space
• /
• v.28 no.2
• /
• pp.156-169
• /
• 2018

The relationship between the mechanical and textural properties of sedimentary rocks has been studied for decades. However, inconsistencies in the results have arisen from both the inhomogeneity of natural rocks and the difficulties encountered in controlling just one textural factor of interest in each experiment. This work produced artificial sedimentary rocks to enable control of every independent parameter at all times. Their homogeneity lowered the deviation of the results, and thus they produced clearer correlations than for natural rocks. The samples were made by mixing bassanite powder with water and silica sand, which produced rocks consisting of sand and gypsum cement. The effect of grain content and size on mechanical properties such as uniaxial compressive strength, Young's modulus, and seismic velocity was estimated. Increasing grain content lowered the compressive strength but raised Young's modulus and seismic velocity. Overall, grain size did not linearly affect the mechanical properties of the samples, but affected them in some way. In future, these results can be compared and integrated with similar experiments using different cement or grain types. This should allow comparison of the effects of the rock constituents themselves and their interactions, with applicability to all kinds of sedimentary rocks.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.3
• /
• pp.33-47
• /
• 2016

The purpose of this study is to understand the master plan of "The project on a comprehensive village development with a unit of a based township" through the master plan analysis and to help understand the implications of this project in order to maintain rural villages that can make local residents satisfied with them and promote the project of comprehensive rural village development as a successful way based on a comparative analysis through the in-site survey. The processes of this study are as follows. First, the analysis of development planning created a drawing based on linking business strategy by each region. The current situation and characteristics of planned public spaces were analyzed through the analysis of location and distribution of public spaces and facilities. Second, the situation analysis was performed by the task of shooting based on the basic plan information, and the master plan and status were confirmed through interviews. Also, the analysis of location and distribution of public spaces and facilities was conducted by a created drawings based on a survey. Finally, the detailed information of public spaces and facilities was compared with the investigation by in-site survey and analyzed through the Master Plan Strategy and a detailed classification of the types of facilities among each regional issues. In addition, by overlapping the planned drawings with the results, the results of formations were confirmed and the planned positional changes and the distribution of facilities were analyzed. As the results of "The project of comprehensive village development with a unit of based township", it was determined that there were many issues on cultural and welfare facilities in this project to meet the business objectives. Also, the facilities the residents needed, identified by interviews, were rural tourism facilities. According to the results, the residents cherished rural tourism facilities as much as basic living facilities. However, as the results of comparative analysis of public spaces and facilities, it was confirmed that mostly the plan was unfulfilled. Therefore, it is concluded that living, cultural and welfare facilities in the township can be maintained and expanded comprehensively as a purpose of "The project of comprehensive village development with a unit of based township" after not only planning process but also the project is fulfilled actually in rural areas.

• Journal of the Korean Society for Library and Information Science
• /
• v.50 no.4
• /
• pp.283-310
• /
• 2016

The present study aims to develop measures to enhance user service at Chungnam Representative Library by establishing Chungnam Representative Library Operation Master Plan. To this end, I conducted a literature review, analysis of services of other representative libraries, and a survey. The study results suggested six measures for user service enhancement. The first measure is space-specific programs, such as children's materials room, general materials room, electronic materials room, auditorium, multipurpose room, outdoor stage, exhibition room, and book café. The second measure is the services specific user types, such as children, adolescents, adults, the disabled, and multicultural families. The third measure is information service specific for information type, such as print material service and digital material service. The fourth measure is the service for the Information-Poor including the expansion of mobile library service, the service for information users in special environment, and the development of mobile library rules. Fifth measure is information service for Chungcheongnam-do residents, such as Baekje Studies specialized service that incorporates local characteristics, specialized information service for Chungcheong Studies and local materials, and information service for administrative and policy materials. The last measure is the measure to secure initial users and early stage service enhancement.

• Journal of Chest Surgery
• /
• v.29 no.4
• /
• pp.397-402
• /
• 1996

A clinical study of 36 cases of pulmonary tuberculosis that had had a surgical resection during the period of 13 years from January 1979 to December 1992 was performed in the Department of Thoracic and Cardiovascular Surgery, Chonbuk National University Hospital The ratio between male and female was 3.5 1 and the age of peak incidence was in the 2nd and 3rd decades. The common prodromal symptoms were chest pain (38.9 %) and hemoptysis or blood tinged sputum (36.1 %). Preoperative diagnostic examination of sputum positivity for AFB stain despite antituberculosis chemotherapy was noticed in 22.8 oyo . Surgical indications were destroyed lobe or segment with or without cavity (58.3 oyo), mass unable to differentiate from lung cancer (16.7 %), total destroyed lung (13.9 %), bronchostenosis with atelectasis and distal bronchiectasis (11.1 %). Types of resection were pneumonectomy in 16.7%, lobec omy and segmentectomy 2.7%, lobectomy 50 %, segmentectomy 27.8%, and wedge resection 2.7%. Postoperatively, pulmonary function Improved compared to the preoperative examination, although these changes were not statistically significant. One patient died of ulcerative colitis due to drug hypersensitivity, and the postoperative complications were remnant dead space in 11.1 %, spreading of tuberculosis in 5.5%, and empyema with BPF in 5.5%.

• The Journal of the Korea Contents Association
• /
• v.14 no.2
• /
• pp.103-112
• /
• 2014

With the development of the society, people's thought and the way of life is changing. The change of the traditional values and marriage lead to the increase of the "singles" groups in modern society. The "singles" group's behaviors, living environment, and consumption have become a social focus. With the emergence of the "singles", traditional furniture already can't meet the demand, so personalized furniture should be developed for the "singles". This study based on background and consumption psychology of the "singles", analyzed the consumption characteristics and preferences of the "singles". It studied the furniture demand of the "singles", and analyzed the existing unmarried person's residential form, types and characteristics of the furniture, and also analyzed the existing furniture using by the "singles" with SWOT, made a more systematic study for finding the advantages and disadvantages of existing the "singles" group's furniture. Then, combined with the unmarried person's furniture needs, living forms, the advantages and disadvantages of the "singles" furniture, etc., made the multi-functional furniture design concept for the "singles". This concept as a design direction, which would make out more suitable furniture be in keeping with the "singles" group's characteristics and requirements. Finally through the concept of multi-functional and folding raise the utilization ratio of narrow space of the living environment.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.6
• /
• pp.603-612
• /
• 2006

The study with laboratory sandbox model has been carried out to address potential use of reclaimed water, as a way for artificially recharging the coastal aquifer, to effectively prevent from seawater intrusion. To do this, we assessed hydraulic and geochemical properties depending upon various extraction and recharging conditions. While solely being recharged, the intrusion could be significantly retarded than those of recharge and extraction implied together. At 0.5 to 2 for the ratio of the extraction over the recharge rate, the fresh water was exploited from the tank, where the void regime was simultaneously saturated with the recharged water. In the meantime, the saline water zone was diluted and back-tracked by the recharged water due to forming a hydraulic geochemical barrier around the injection well. However, if the ratio was being increased to greater than 4, saltwater more deeply intruded to the freshwater zone because the artificial recharge was not sufficiently supplied to timely back-fill the void space. When the aquifer water was intermittently extracted at the ratio of $0.5{\sim}2$ over the recharge rate, the value of S.M.I. decreased, but increasing it to more than 4 unlikely escalated the value of S.M.I as much as $3{\sim}47%$ indicating that the salt water intruded. It finally revealed that the proper ratio of extraction/recharge or intermittent extraction would efficiently retracted seawater intrusion while the freshwater sources could be conservatively utilized.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.47-60
• /
• 2017

Car sharing, which is considered as a good example of innovation in the transportation sector, is a type of use in which a plurality of people share a single vehicle for a short period of time. It is divided into various types, NFP (Not For Profit) operated by a non-profit organization, B2C (Business to Customer), which is operated by a company, and Peer to Peer (P2P), which is directly connected to an individual. Among them, P2P car sharing is a method of sharing personal vehicles owned by individuals. It has the merit of reducing traffic congestion and providing for efficient traffic demand management by reducing the purchase rate of additional vehicles and minimizing the number of idle ones. This study examines the introduction of P2P car sharing in order to develop a traffic demand management policy and facilitate the transition to a sustainable transportation system. The spatial extent of the study consisted of apartment complexes in Seoul. In apartment complexes, it is possible to minimize the level of expenditure, such as operating expenses, by utilizing the APT management office and there is no difficulty in securing the necessary parking space. Therefore, apartment complexes were selected as the spatial range.

• Journal of Distribution Research
• /
• v.12 no.2
• /
• pp.79-102
• /
• 2007

Consumers evaluate stores by comparing stores that we, in their minds, similar and are competitive with one another; and in this way, the term "consideration set of stores" is defined as those store alternatives the consumer is aware of and evaluates positively. The purpose of this study is to aid in understanding the consideration set of stores in store choice processes in apparel product purchases. More specifically, this study aims to clarify the relation between consideration set of stores and importance of store image. As a result, the respondents of quantitative study were classified into seven groups by the number of stores and store types they considered: 1) "small-road shop sets group" ; 2) "small-market sets group" ; 3) "small- department store sets group" ; 4) "small-department store/outlet sets group" ; 5) "large-department store/market sets group" ; 6) "large-department store/road shop sets group" ; and 7) "large-department store sets group". Further, significant differences among the groups in the importance of store image were observed. For example, low prices were an important factor in both the small-market considering group and large-department store/market considering group when choosing a retail store, there were also differences in the considering groups in that for the small-department store considering group, store mileage-discount cards were important whereas ample space for relaxation around the stores were important retail store selection factors for the large-department store/road shop considering group. This study may provide a useful direction to retailers in finding out who the target customers and competitive stores are and allow retailers to make proper marketing strategies.