• 전기학회논문지
• /
• 제56권6호
• /
• pp.1071-1079
• /
• 2007

In this paper, a novel space vector control method for isolated multi-level inverter using 3-phase low frequency transformers is proposed. This method is based on the simplification of the space-vector diagram of a five-level inverter using calculated table into fully programming method. The execution time of the proposed method is about same as that of the method using calculated table. Also, the proposed method is easily applied to other case level inverter. We applied this method into the 3-phase IHCML inverter using common arm. It makes possible to use a single DC power source due to employing low frequency transformers. In this inverter, the number of transformers could be reduced compare with an exiting 3-phase multi-level inverter using single phase transformer. In addition, this method generates very low harmonic distortion operation with nearly fundamental switching frequency. Finally, We tested multi-level inverter to clarify electric circuit and reasonableness through Matlab simulation and experiment by using prototype inverter.

• 대한산업공학회지
• /
• 제37권4호
• /
• pp.289-296
• /
• 2011

In most distribution centers, products are received from the suppliers in units of pallet, stored in a rack, moved to the picking area for replenishment, picked according to customer orders, and shipped to customers. In some distribution centers, however, replenishment is made in not a whole pallet but only a portion of a pallet load, mainly due to the limited space in the order-picking area; as a result, partially loaded pallets occupy cells in the rack. As the number of slow-moving items increases, more cells are occupied by partially loaded pallets so that fewer empty cells are available for storing full, incoming pallets. This will necessitate the construction or leasing of additional storage space, which will entail significant cost. As an alternative, we propose pallet consolidation, which involves moving a partial load to another partially-loaded pallet in order to create one empty cell in the rack. In this paper, we define three pallet consolidation problems; formulate each problem as a binary integer programming model; and present heuristic algorithms for the problems. The average performance of each of the proposed heuristics is evaluated using simulation.

• 한국건설관리학회논문집
• /
• 제24권4호
• /
• pp.60-73
• /
• 2023

The need for adopting automation technologies to improve inefficiencies in interior finishing modeling work is increasing during the Building Information Modeling (BIM) design stage. As a result, the use of visual programming languages (VPL) for practical applications is growing. However, undefined or incorrect space designations in BIM models can hinder the development of automated finishing modeling processes, resulting in erroneous corrections and rework. To address this challenge, this study first developed a rule-based automated interior finishing detailing module for floors, walls, and ceilings. In addition, an automated space integrity checking module with 86.69% ACC using the Multi-Layer Perceptron (MLP) model was developed. These modules were integrated into a design automation module for interior finishing, which was then verified for practical utility. The results showed that the automation module reduced the time required for modeling and integrity checking by 97.6% compared to manual work, confirming its utility in assisting BIM model development for interior finishing works.

• 인터넷정보학회논문지
• /
• 제16권6호
• /
• pp.39-46
• /
• 2015

지식 공간 이론이란 학습자들이 대해 최대한의 학습 성취를 이끌어 낼 수 있도록 학습자들에 대한 가이드라인을 제공해주는 이론으로 여러 교육 환경에서 사용되어 왔다. 하지만 지식 공간 이론을 사용해왔던 많은 방법들이 주로 수작업을 통해 이루어져 왔고 이러한 작업을 지원하기 위해서 비주얼 베이직 혹은 R 등의 프로그램이 사용되어 왔지만 프로그램을 따로 배워야 하는 불편함과 시간적으로 낭비되는 등의 문제를 야기해 왔다. 본 논문에서는 이러한 문제를 해결하기 위해서 지식 공간상에서 학습자들의 지식구조를 자동으로 분석하고 결정적 학습 경로를 제공하는 이른바 지식 구조 분석 시스템을 제안한다. 제안된 시스템은 아파치 웹상에서 구현되었고, 카이 제곱 값을 산출하여 결정적 학습 흐름도를 도출하도록 하였다. 제안된 방법은 사용자들이 웹에서 편리하게 학습자들의 지식 상태 분석할 수 있도록 환경을 제공하고 지식 구조의 체계적인 검토를 위한 방법을 제시해준다.

• 대한전자공학회논문지SP
• /
• 제41권6호
• /
• pp.9-18
• /
• 2004

본 논문에서 우리는 시차공간영상 (disparity space image)을 이용한 새로운 스테레오 정합 방법을 제안한다. 본 논문에서는 실측 제어점 대신 영상 안에서 특징점을 추출하여 정합영역을 설정하였고, 간단한 비용행렬을 정의하였다. 그리고 정합 속도를 증가시키기 위해 화소 단위의 정합을 이용하였다. 화소 단위의 정합은 정합 속도는 향상시키지만, 주변 영역을 이용하지 않기 때문에 정합의 정확성이 낮아진다. 이러한 단점을 보완하기 위해 시차공간영상의 특성을 이용하여 정합경로를 확대시켜서 주변 영역을 최대한 이용하였다. 또한, 현재 위치에서 이전과 이후의 시차공간영상을 체적화하여 전후의 시차공간영상을 이용함으로써 정합의 정확도를 더욱 향상시키는 정합 보정 모듈을 추가하였다. 본 논문에서 제안된 알고리즘은 다양한 영상에 적용하여 실험하였고, 그 결과 제안된 방법의 우수한 성능을 확인할 수 있었다.

• Architectural research
• /
• 제22권2호
• /
• pp.41-52
• /
• 2020

Laboratory buildings with specialized equipment and ventilation systems pose challenges in terms of efficient energy use and initial construction costs. Additionally, lab spaces should have flexible and efficient layouts and provide a comfortable indoor research environment. Therefore, this study aims to identify the correlation between the facade of a building and its interior layout from case studies of energy-efficient research labs and to propose passive energy design strategies for the establishment of an optimal research environment. The case studies in this paper were selected from the American Institute of Architects Committee on the Environment Top Ten Projects and Leadership in Energy and Environmental Design (LEED) certified research lab projects. In this paper, the passive design strategies of space zoning, façade design devices to control heating and cooling loads were analyzed. Additionally, the relationships between these strategies and the interior lab layouts, lab support spaces, offices, and circulation areas were examined. The following four conclusions were drawn from the analysis of various cases: 1) space zoning for grouping areas with similar energy requirements is performed to concentrate similar heating and cooling demands to simplify the HVAC loads. 2) Public areas such as corridor, atrium, or courtyard can serve as buffer zones that employ passive solar design to minimize the mechanical energy load. 3) A balanced window-to-wall ratio (WWR), exterior shading devices, and natural ventilation systems are applied according to the space programming energy requirements to minimize the dependence on mechanical service. 4) Lastly, typical laboratory space zoning categories can be revised, reversed, and even reconfigured to minimize the energy load and adjust to the site context. This study can provide deep insights into various design strategies employed for construction of green laboratories along with intuitive arrangement of various building components such as laboratory spaces, lab support spaces, office spaces, and common public areas. The key findings of this study can contribute towards creating improved designs of laboratory facilities with reduced carbon footprint and greenhouse emissions.

• 한국조경학회지
• /
• 제28권4호
• /
• pp.75-90
• /
• 2000

This study suggests the methods of the assessment and creation of biotopes in small and medium sized cities, in Korea. For this purpose, Chonju city was selected to classify and asses the biotope types. Moreover, relevant legislations to conserve and enhance urban biotopes were examined. The results of this study are as follows: 1) There were two approaches to asses the potential of urban biotopes in medium-sized cities. One was the urban scale evaluation for urban green spaces and the other was the biotope scale evaluation for the classification and evaluation of biotopes. 2) The urban scale evaluation was developed through overlaping analysis of landuse and vegetation factors. This study also included the conception of watershed. In this conception, three watersheds in Chonju city were characterized. According to these characteristics, individual programs for conservation and enhancement of urban green space were suggested. 3) For the biotope scale evaluation, Selected site was inclusively mapped and field investigation actually was carried. There were total 9 types of bitopes. Especially landuse was appeared in various evaluation items were vegetation structure, area of green space, condition of vegetation and vegetation profile. Mt, Gonji and Dukjin park, Chonbuk national University and fields were evaluated highly I the potential. 4) The biotope programs were based on the results of assessment and physical characteristics of biotopes. The uniform and simple levels on vegetation must be modified with various levels of vegetation structure and vernacular plants. And the physical characteristics like Points, Corridors and Patches can be organized by the conception of biotope networking theory. 5) The proper legislative environment was the clue elements for the biotope programs. Until now, only five types of parks and two types of green space are defined and the minimum size of green space has been proposed by the law. So, it is necessary to enlarge the conception of green space in legislation and improve the quality of green space by amending the related regulations. This study has limitation because it was selected only in Chonju. Through the continuous studies, we need to apply this other small and medium sized cities, South Korea. Also the data collection and management of theme maps such as actual vegetation, landuse and a soil must be done preliminary.

• 천문학회보
• /
• 제44권1호
• /
• pp.54.2-54.2
• /
• 2019

Removing noise which occurs inevitably when taking image data has been a big concern. There is a way to raise signal-to-noise ratio and it is regarded as the only way, image stacking. Image stacking is averaging or just adding all pixel values of multiple pictures taken of a specific area. Its performance and reliability are unquestioned, but its weaknesses are also evident. Object with fast proper motion can be vanished, and most of all, it takes too long time. So if we can handle single shot image well and achieve similar performance, we can overcome those weaknesses. Recent developments in deep learning have enabled things that were not possible with former algorithm-based programming. One of the things is generating data with more information from data with less information. As a part of that, we reproduced stacked image from single shot image using a kind of deep learning, conditional generative adversarial network (cGAN). r-band camcol2 south data were used from SDSS Stripe 82 data. From all fields, image data which is stacked with only 22 individual images and, as a pair of stacked image, single pass data which were included in all stacked image were used. All used fields are cut in $128{\times}128$ pixel size, so total number of image is 17930. 14234 pairs of all images were used for training cGAN and 3696 pairs were used for verify the result. As a result, RMS error of pixel values between generated data from the best condition and target data were $7.67{\times}10^{-4}$ compared to original input data, $1.24{\times}10^{-3}$. We also applied to a few test galaxy images and generated images were similar to stacked images qualitatively compared to other de-noising methods. In addition, with photometry, The number count of stacked-cGAN matched sources is larger than that of single pass-stacked one, especially for fainter objects. Also, magnitude completeness became better in fainter objects. With this work, it is possible to observe reliably 1 magnitude fainter object.

• 한국항공우주학회지
• /
• 제50권4호
• /
• pp.287-295
• /
• 2022

저고도 궤적의 장사정포 위협이 대두됨에 따라 이를 방어할 요격 시스템의 개발이 시작될 예정이다. 이러한 장사정포의 공격을 방어하는 문제는 전형적인 동적 무기 표적 할당 문제다. 동적 무기 표적 할당 문제에서는 한 시점에서의 의사결정 결과가 이후 시점의 의사결정 과정에 영향을 주며, 이는 마코브 의사결정 모형의 특징이기도 하다. 장사정포의 공격을 방어하기 위한 의사결정 과정에 허용되는 시간은 공격자와 방어자의 거리를 고려할 때 저고도 궤적의 동시 다발성 발사체에 대한 대응은 수 초 이내에 결정되어야 하나, 짧은 시간 내에 마코브 의사결정 과정으로 최적해를 구하는 것은 불가능하다. 본 논문에서는 장사정포 공격을 방어하는 동적 무기 표적 할당 문제를 마코브 의사결정 문제로 나타내고, 3가지 시나리오를 작성한 후 근사적 동적계획 방법을 적용하여 요격이 가능 시간 안에 해의 도출이 가능한지를 시뮬레이션을 통하여 확인하였다. 도출된 해의 품질을 검증하기 위하여 각 시나리오에 대하여 근사적 동적계획을 적용한 결과와 Shoot-Shoot-Look 방법을 적용한 결과를 비교하였다. 시뮬레이션 결과, 장사정포의 방어 시나리오에 대하여 근사적 동적계획의 결과가 Shoot-Shoot-Look 방법을 이용한 결과보다 우수함을 보였다.

• 천문학회보
• /
• 제43권1호
• /
• pp.69.4-70
• /
• 2018

KAOS30 is an automatic observing software for the wide-field 10-inch telescope as a piggyback system on the 30-inch telescope at the McDonald Observatory in Texas, US. The software has four packages in terms of functionality and is divided into communication with Telescope Control System (TCS), controlling of CCD camera and filter wheel, controlling of focuser, and script for automation observing. Each interconnect of those are based on exe-exe communication. The advantage of this distinction is that each package can be independently maintained for further updates. KAOS30 has an integrated control library that combines function library connecting each device and package. This ensures that the software can extensible interface because all packages are access to the control devices independently. Also, the library includes the ASCOM driver platform. ASCOM is a standard general purpose library that supports Application Programming Interface (API) of astronomical devices. We present the software architecture of KAOS30, and structure of interfacing between hardware and package or package and package.