• 제목/요약/키워드: Sources of variation

검색결과 611건 처리시간 0.027초

A Simple Power Management Scheme with Enhanced Stability for a Solar PV/Wind/Fuel Cell Fed Standalone Hybrid Power Supply using Embedded and Neural Network Controller

  • Thangavel, S.;Saravanan, S.
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권5호
    • /
    • pp.1454-1470
    • /
    • 2014
  • This paper propose a new power conditioner topology with intelligent power management controller that integrates multiple renewable energy sources such as solar energy, wind energy and fuel cell energy with battery backup to make best use of their operating characteristics and obtain better reliability than that could be obtained by single renewable energy based power supply. The proposed embedded controller is programmed for maintaining a constant voltage at PCC, maximum power point tracking for solar PV panel and WTG and power flow control by regulating the reference currents of the controller on instantaneous basis based on the power delivered by the sources and load demand. Instantaneous variation in reference currents of the controller enhances the controller response as it accommodates the effect of continuously varying solar insolation and wind speed in the power management. The power conditioner uses a battery bank with embedded controller based online SOC estimation and battery charging system to suitably sink or source the input power based on the load demand. The simulation results of the proposed power management system for a standalone solar/WTG/fuel cell fed hybrid power supply with real time solar radiation and wind velocity data collected from solar centre, KEC for a sporadically varying load demand is presented in this paper and the results are encouraging in reliability and stability perspective.

Investigation of touchdown point mismatch during installation for catenary risers

  • Huang, Chaojun;Hu, Guanyu;Yin, Fengjie
    • Ocean Systems Engineering
    • /
    • 제8권3호
    • /
    • pp.313-327
    • /
    • 2018
  • Meeting the touchdown point (TDP) target box is one of the challenges during catenary riser installation, especially for deep water or ultra-deep water riser systems. TDP location mismatch compared to the design can result in variation of riser configuration, additional hang-off misalignment, and extra bending loads going into the hang-off porch. A good understanding of the key installation parameters can help to minimize this mismatch, and ensure that the riser global response meets the design criteria. This paper focuses on investigating the potential factors that may affect the touchdown point location, and addressing the challenges both in the design stage and during installation campaign. Conventionally, the vessel offset and current are the most critical factors which may affect the TDP movement during installation. With the offshore exploration going deeper and deeper in the sea (up to 10,000ft), other sources such as the seabed slope and seabed soil stiffness are playing an important role as well. The impacts of potential sources are quantified through case studies for steel catenary riser (SCR) and lazy wave steel catenary riser (LWSCR) in deep water application. Investigations through both theoretical study and numerical validation are carried out. Furthermore, design recommendations are provided during execution phase for the TDP mismatch condition to ensure the integrity of the riser system.

대기 부유분진의 입경별 특성에 관한 연구 (Study on Characteristics by Aerodynamic Diameter of Airborne Suspended Particulate Matters)

  • 김성천;강달선;차영희
    • 한국환경보건학회지
    • /
    • 제26권2호
    • /
    • pp.108-115
    • /
    • 2000
  • The mass fraction of PM10 had a bimodal distribution in the middle of between 2.1 ${\mu}{\textrm}{m}$, and the average mass fraction of particles less than 2.1~3.1 ${\mu}{\textrm}{m}$ was 54.1% for Pb and 890.8 ng/㎥ for Fe, respectively. For the concentration of PM10 and metallic elements by seasonal variation, PM10 showed bimodal distribution, while metallic elements showed different distributions by their sources. The ratios of fine particles to total mass were 0.45 for PM10, 0.41 for Cr, and 0.20 for Fe, 0.57 for Zn, 0.68 for Cd and 0.63 for Pb, respectively. That facts indicated that PM10, Zn, Cd, Cr and Pb were from anthropogenic sources, and Fe was from natural source. The geometric means and geometric standard deviations by seasonal variations were 3.6 ${\mu}{\textrm}{m}$ , 2.31 ${\mu}{\textrm}{m}$ in winter, 3.0 ${\mu}{\textrm}{m}$ , 2.49 ${\mu}{\textrm}{m}$ in spring, 2.7 ${\mu}{\textrm}{m}$ , 2.03 ${\mu}{\textrm}{m}$ in summer respectively. And, total efficiency of cascade impactor by seasonal variations were 49.6% in winter, 45.9% in spring and 44.5% in summer.

  • PDF

천안/아산권역내 곡교천의 수질분석 및 지리정보체계를 이용한 유역 오염원 관리방안에 관한 연구 (Water-Quality Analysis for Gokgyo Stream in Chonan Asan Region and Pollution Source Control Strategy Using GIS)

  • 황병기;이상호
    • 한국환경과학회지
    • /
    • 제9권6호
    • /
    • pp.443-447
    • /
    • 2000
  • Chonan and Asan city have been a focal point due to rapid development as the first station for Express Railroad and key cities West Coast Development Region. Gokgyo stream adjacent to the cities plays an important role as a drainage channel for an agriculture and a discharger of urban storm water. Waster quality of the stream has been deteriorating caused by pollution sources such as a untreated wastewater discharge and runoff from the watershed. In the study, we conducted 4 surveys in April, May, July, and September to understand the current state of water quality for the stream and to make it possibe to predict future water-quality variation for future development. The system runs on a personal computer under the windows enviroment and provides extensive graphic user interface(GUI) for user-friendly assessment. Using the pull-down menus provided by the GUI panel, the user is able to operate the system by pointing and clicking the icon to identify the state of water-quality at locations concerned. Furthermore, we developed an integrated watershed management system. The constructed system could be a useful tool as a decesion maker for pollution source control strategy.

  • PDF

구 주위의 유동으로 인해 발생하는 유동 소음의 특성 (Characteristics of Flow-Induced Noise around a Sphere)

  • 윤기웅;최해천
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 추계학술대회
    • /
    • pp.810-815
    • /
    • 2003
  • Flow-induced noise propagated from flow over a sphere is numerically investigated for laminar flow at Re = 300 and 425, and for turbulent flow at Re = 3700 and $10^4$, where the Reynolds number is based on the freestream velocity and the sphere diameter. The numerical method used for obtaining the flow over a sphere is based on an immersed boundary method in a cylindrical coordinate system. The Curle’s solutions of the Lighthill’s acoustic analogy with and without the far-field and compact-source approximation are used in order to investigate the noise field from flow over a sphere. Since the drag and lift forces change irregularly in time at Re = 425, 3700 and $10^{4}$, the noise propagates in a complicated manner. At Re = 300, 425 and $10^{4}$, the noise from dipole sources is much larger than that from quadrupole sources. On the other hand, at Re = 3700, the quadrupole source becomes dominant. The temporal variation of the flow-induced noise around a sphere is obtained at some observation points, which shows that the peak frequency corresponds to the Strouhal number associated with the wake instability.

  • PDF

밉맵 기반의 지연된 부드러운 그림자 매핑 (Mipmap-Based Deferred Soft Shadow Mapping)

  • 김성구;이성길
    • 정보과학회 논문지
    • /
    • 제43권4호
    • /
    • pp.399-403
    • /
    • 2016
  • 컴퓨터그래픽스에서 지연된 음영처리는 깊이 버퍼링을 이용하여 화면에 나타날 기하 정보만을 저장한 후, 픽셀 음영처리를 화면공간에서 후처리하는 기법이다. 일반적인 그림자 매핑과 달리 후처리 기반 기법은 렌더링 파이프라인 구조의 변화 없이 적용이 가능하므로 다중 광원에 의한 그림자 효과를 다루기에 적합하다. 본 논문에서는 지연된 음영처리 기반의 그림자 생성 방법과 밉맵을 이용하여 이를 부드러운 그림자로 확장하는 방법을 제안한다. 광원으로부터 가시도 맵을 저장한 후, 밉맵 필터링을 통해 가시도 맵을 블러한 후 음영처리 결과에 적용한다. 이러한 기법은 부드러운 그림자 효과를 얻지만, 픽셀 깊이에 관계없는 필터링으로 인해 빛샘 현상이 발생할 수 있다. 이러한 빛샘 현상을 제거하기 위해 본 논문은 또한 화면공간에서의 깊이 차이에 따른 적응형 샘플링 기법을 제안한다.

한국산 팽나무 버섯의 계통류별과 그 배양적 특성에 관한 연구 (On the Identification of Strains and the Cultural Characteristics of Flammulina velutipes in Korea)

  • 윤정구
    • 미생물학회지
    • /
    • 제12권4호
    • /
    • pp.159-179
    • /
    • 1974
  • In order to investigate morphological and cultural characteristics of strains in species, Flammulina velutipes, the author collected isolates of Flammultina velutipes at 49 locations in Korea and cultivated these isolates on the various kinds of solid media. After investigating the cultural characteristics, appeared on the various media, he obtained the following results : 1. The variation of colors in the fruit bodies is connected with the variation of climatic environments(composite effects between mean temperature in January and number of rain days of 1mm and over precipitation). The author, therfore, can find out the trend that brown type is distributed in the midland climatic region and yellow type in the southern climatic regoin. 2. Two types can be classified into several strains respectively : the strain of abundant or insufficient productivity, and strain of selectivity or non-selectivity of media. 3. According to the results of mutual comparison of soluble mycelial proteins by disc electrophoresis using polyacrylamide gels, each type has special common protein fractions(brown type : band located at 26..5mm position from surface of gel, yellow type : band located at 24.5mm position from surface of gel), and each strain has special protein fractions too. Therefore this phenomenon seems to support the results obtained by the above-stated morphological and cultural studies. 4. In the adaptability of strains to the temperature, every strain has the nature of growing in lower temperature(the optimum temperature of 20.deg.C to 25.deg.C) except that YI-1 strain has the optimum temperatue of $25^{\circ}C$-26^{\circ}C. And mycelial growth of every strain is discontinued at $35^{\circ}C.$ 5. In the adaptability of strains to the H-ion concentration, every strain has wide adaptable range of H-ion concentration, and has optimum range of pH 5.5 to 6.6 in mycelial growth excepting YA01, BI-2 and YI-1. 6. In the utility of carbon sources, the mycelial growth of every strain is very poor on the media containing xylose(average diameter of mycelial growth : 18mm), and most strains utilize favorably sucrose(39mm), maltose(37mm) and dextrose(35mm) in mycelial growth. In the utility of nitrogen sources, every strain utilizes favorably organic nitrogens(36 mm)more than inorganic nitrogens (25 mm), and utilizes fully peptone nad asparagine in organic nitrogens. Especially BA-1, BIK-2 and YA-1 strains grow vigorously on each media containing various carbon and nitrogen sources. 7. The characteristic tests of the number of days required for mycelial growth, the number of days requried for sprout of young bodies, the length of stipe and the number of fruit bodies formation seem to be useful methods in the early selection of the strain of the abundant productivity.

  • PDF

배양 조건에 따른 상황 버섯의 다당류 생산 및 단당류 구성 변화 (Effect of Cultural Conditions on Polysaccharide Production and its Monosaccharide Composition in Phellinus linteus L13202)

  • 이재훈;조수묵;고경수;유익동
    • 한국균학회지
    • /
    • 제23권4호통권75호
    • /
    • pp.325-331
    • /
    • 1995
  • 상황 (Phellinus linteus) 의 균사체 생장과 다당류 생산 및 다당류에서의 단당류 구성비에 대한 배양 조건의 영향을 조사하였다. 여러 가지 배지를 사용하여 실험한 결과 GP(glucose-peptone)배지에서 균사 생장이 가장 양호하여, 이 배지를 사용하여 탄소원 및 pH 영향을 조사하였다. 탄소원중 glucose에서 최대 균사체 생장 (0.9 g/100 ml)을 보였고, 다당류의 수율은 $5{\sim}14%$ 로서 mannose에서 최대이었다. 최적 pH는 7 이였으며, 산성 pH에서는 비교적 좋은 생장을 보였으나, 알칼리 pH에서는 생장이 급격히 감소하였다. 한편 pH에 따른 다당류 수율은 $5{\sim}8%$로 큰 변화를 보이지 않았다. 또한 탄소원 및 pH에 따른 단당류 구성비의 변화가 관찰되었다. 즉 탄소원에 따라서 다당류에서 glucose, mannose, 및 galactose 함량은 각각 $80{\sim}95%,\;3{\sim}12%$, 그리고 $2{\sim}10%$이었다. 한편 pH 변화에 따라서, glucose는 $83{\sim}92%$, mannose 는 $4{\sim}8%$, 그리고 galactose는$5{\sim}8%$의 구성비를 보였다. 이 결과는 배양 조건에 의한 항암면역활성 다당류의 구조의 변환 및 생산 증강이 가능함을 시사한다.

  • PDF

한반도 주요 대도시의 PM10 농도 특성 및 배출량과의 상관성 분석 (The Analysis of PM10 Concentration and Emission Contribution in the Major Cities of Korea)

  • 강민성;김유근;김태희;강윤희;정주희
    • 한국환경과학회지
    • /
    • 제25권8호
    • /
    • pp.1065-1076
    • /
    • 2016
  • This study analyzes the $PM_{10}$ characteristics (particulate matter with aerodynamic diameter less than $10{\mu}m$), concentration, and emissions in eight large South Korean cities (Seoul, Incheon, Daejeon, Daegu, Gwangju, Ulsan, Busan, Jeju). The annual median of $PM_{10}$ concentration showed a decline of $0.02{\sim}1.97{\mu}g/m^3$ in the regions, except for Incheon, which recorded an annual $0.02{\mu}g/m^3$ increase. The monthly distribution levels were high in spring, winter, fall, and the summer, but were lower in summer for all regions except for Ulsan. These differences are thought to be due to the dust in spring and the cleaning effect of precipitation in summer. The variation in concentrations during the day (diurnal variation) showed that $PM_{10}$ levels were very high during the rush hour and that this was most extreme in the cities (10.00 and 18.00-21.00). The total annual $PM_{10}$ emissions analysis suggested that there had been a general decrease, except for Jeju. On-road mobile (OM) sources, which contributed a large proportion of the particulates in most regions, decreased, but fugitive dust (FD) sources increased in the remaining regions, except for Daegu. The correlation analysis between $PM_{10}$ concentrations and emissions showed that FD could be used as a valid, positive predictor of $PM_{10}$ emissions in Seoul (74.5% (p<0.05)), Dajeon (47.2% (p<0.05)), and Busan (59.1% (p<0.01)). Furthermore, industrial combustion (IC) was also a significant predictor in Incheon (61.7% (p<0.01)), and on-road mobile (OC) sources were a valid predictor in Daegu (24.8% (p<0.05)).

Model Evaluation based on a Relationship Analysis between the Emission and Concentration of Atmospheric Ammonia in the Kanto Region of Japan

  • SAKURAI, Tatsuya;SUZUKI, Takeru;YOSHIOKA, Misato
    • Asian Journal of Atmospheric Environment
    • /
    • 제12권1호
    • /
    • pp.59-66
    • /
    • 2018
  • This study aims to evaluate the performance of the Air Quality Model (AQM) for the seasonal and spatial distribution of the $NH_3$ concentration in the atmosphere. To obtain observational data for the model validation, observations based on biweekly sampling have been conducted using passive samplers since April 2015 at multiple monitoring sites in the Tokyo metropolitan area. AQM, built based on WRF/CMAQ, was applied to predict the $NH_3$ concentration observed from April 2015 to March 2016. The simulation domain includes the Kanto region, which is the most densely populated area in Japan. Because the area also contains large amount of livestock, especially in its northern part, the density of the $NH_3$ emissions derived from human activities and agriculture there are estimated to be the highest in Japan. In the model validation, the model overestimated the observed $NH_3$ concentration in the summer season and underestimated it in the winter season. In particular, the overestimation in the summer was remarkable at a rural site (Komae) in Tokyo. It was found that the overestimation at Komae was caused by the transportation of $NH_3$ emitted in the northern part of the Kanto region during the night. It is suggested that the emission input used in this study overestimated the $NH_3$ emission from human sources around the Tokyo suburbs and agricultural sources in the northern part of the Kanto region in the summer season. In addition, the current emission inventories might overestimate the difference of the agricultural $NH_3$ emissions among seasons. Because the overestimation of $NH_3$ in the summer causes an overestimation of $NO_3{^-}$ in $PM_{2.5}$ in the AQM simulation, further investigation is necessary for the seasonal variation in the $NH_3$ emissions.